Co-authored-by: Ryan <fauxpark@gmail.com>pull/9489/head
@ -0,0 +1,209 @@ | |||
/* | |||
Copyright 2020 MechMerlin | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0x4558 // EX | |||
#define PRODUCT_ID 0xE851 // E8.5 Version 1 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Exclusive | |||
#define PRODUCT E8.5 Hotswap PCB | |||
#define DESCRIPTION A custom TKL keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 11 | |||
#define MATRIX_COLS 9 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
// 0 1 2 3 4 5 6 7 8 9 A | |||
#define MATRIX_ROW_PINS { E6, B0, B1, B2, B3, B7, F7, F6, F5, F4, F1 } | |||
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION ROW2COL | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
// #define BACKLIGHT_PIN B6 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 6 | |||
#define RGB_DI_PIN E2 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLED_NUM 18 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
/*== all animations enable ==*/ | |||
#define RGBLIGHT_ANIMATIONS | |||
#endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
/* defined by default; to change, uncomment and set to the combination you want */ | |||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP H | |||
//#define MAGIC_KEY_HELP_ALT SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER0_ALT GRAVE | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER B | |||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,17 @@ | |||
/* Copyright 2020 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "e85.h" |
@ -0,0 +1,87 @@ | |||
/* Copyright 2020 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define ___ KC_NO | |||
// This is the layout for the soldered PCB | |||
#define LAYOUT_all( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K74, K73, K76, K72, K71, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K94, K86, K82, K81, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K83, \ | |||
K40, K41, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, KA3, K92, \ | |||
K50, K51, K52, K56, K58, K57, K54, K53, KA6, KA2, KA1 \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ | |||
{ K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ | |||
{ K50, K51, K52, K53, K54, KC_NO, K56, K57, K58 }, \ | |||
{ KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \ | |||
{ K70, K71, K72, K73, K74, K75, K76, K77, K78 }, \ | |||
{ KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \ | |||
{ KC_NO, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97, K98 }, \ | |||
{ KC_NO, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8 }, \ | |||
} | |||
// This is the layout for one hotswap PCB and can also be used on the soldered edition | |||
#define LAYOUT_ansi_standard( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K73, K76, K72, K71, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K83, K86, K82, K81, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K93, \ | |||
K40, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, K92, \ | |||
K50, K51, K52, K56, K58, K57, K54, K53, KA6, KA2, KA1 \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ | |||
{ K40, KC_NO, K42, K43, K44, K45, K46, K47, K48 }, \ | |||
{ K50, K51, K52, K53, K54, KC_NO, K56, K57, K58 }, \ | |||
{ KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \ | |||
{ K70, K71, K72, K73, KC_NO, K75, K76, K77, K78 }, \ | |||
{ KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \ | |||
{ KC_NO, KC_NO, K92, K93, KC_NO, K95, KC_NO, K97, K98 }, \ | |||
{ KC_NO, KA1, KA2, KC_NO, KA4, KA5, KA6, KA7, KA8 }, \ | |||
} | |||
// This is the layout for one hotswap PCB and can also be used on the soldered edition | |||
#define LAYOUT_ansi_tsangan( \ | |||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K68, K67, K65, K64, K63, K66, K62, K61, \ | |||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K78, K70, K77, K75, K73, K76, K72, K71, \ | |||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K88, K87, K85, K84, K83, K86, K82, K81, \ | |||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K98, K97, K95, K93, \ | |||
K40, K42, K43, K44, K45, K46, K47, K48, KA8, KA7, KA5, KA4, K92, \ | |||
K50, K51, K52, K56, K57, K54, K53, KA6, KA2, KA1 \ | |||
) { \ | |||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ | |||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \ | |||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ | |||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ | |||
{ K40, KC_NO, K42, K43, K44, K45, K46, K47, K48 }, \ | |||
{ K50, K51, K52, K53, K54, KC_NO, K56, K57, KC_NO }, \ | |||
{ KC_NO, K61, K62, K63, K64, K65, K66, K67, K68 }, \ | |||
{ K70, K71, K72, K73, KC_NO, K75, K76, K77, K78 }, \ | |||
{ KC_NO, K81, K82, K83, K84, K85, K86, K87, K88 }, \ | |||
{ KC_NO, KC_NO, K92, K93, KC_NO, K95, KC_NO, K97, K98 }, \ | |||
{ KC_NO, KA1, KA2, KC_NO, KA4, KA5, KA6, KA7, KA8 }, \ | |||
} |
@ -0,0 +1,293 @@ | |||
{ | |||
"keyboard_name": "Exclusive E8.5 TKL", | |||
"url": "", | |||
"maintainer": "qmk", | |||
"width": 18.25, | |||
"height": 6.5, | |||
"layouts": { | |||
"LAYOUT_all": { | |||
"key_count": 91, | |||
"layout": [ | |||
{"label":"K00 (E6,D0)", "x":0, "y":0}, | |||
{"label":"K01 (E6,D1)", "x":1.25, "y":0}, | |||
{"label":"K02 (E6,D2)", "x":2.25, "y":0}, | |||
{"label":"K03 (E6,D3)", "x":3.25, "y":0}, | |||
{"label":"K04 (E6,D5)", "x":4.25, "y":0}, | |||
{"label":"K05 (E6,D4)", "x":5.5, "y":0}, | |||
{"label":"K06 (E6,D6)", "x":6.5, "y":0}, | |||
{"label":"K07 (E6,D7)", "x":7.5, "y":0}, | |||
{"label":"K08 (E6,B4)", "x":8.5, "y":0}, | |||
{"label":"K68 (F7,B4)", "x":9.75, "y":0}, | |||
{"label":"K67 (F7,D7)", "x":10.75, "y":0}, | |||
{"label":"K65 (F7,D4)", "x":11.75, "y":0}, | |||
{"label":"K64 (F7,D5)", "x":12.75, "y":0}, | |||
{"label":"K63 (F7,D3)", "x":14, "y":0}, | |||
{"label":"K66 (F7,D6)", "x":15.25, "y":0}, | |||
{"label":"K62 (F7,D2)", "x":16.25, "y":0}, | |||
{"label":"K61 (F7,D1)", "x":17.25, "y":0}, | |||
{"label":"K10 (B0,D0)", "x":0, "y":1.5}, | |||
{"label":"K11 (B0,D1)", "x":1, "y":1.5}, | |||
{"label":"K12 (B0,D2)", "x":2, "y":1.5}, | |||
{"label":"K13 (B0,D3)", "x":3, "y":1.5}, | |||
{"label":"K14 (B0,D5)", "x":4, "y":1.5}, | |||
{"label":"K15 (B0,D4)", "x":5, "y":1.5}, | |||
{"label":"K16 (B0,D6)", "x":6, "y":1.5}, | |||
{"label":"K17 (B0,D7)", "x":7, "y":1.5}, | |||
{"label":"K18 (B0,B4)", "x":8, "y":1.5}, | |||
{"label":"K78 (F6,B4)", "x":9, "y":1.5}, | |||
{"label":"K70 (F6,D0)", "x":10, "y":1.5}, | |||
{"label":"K77 (F6,D7)", "x":11, "y":1.5}, | |||
{"label":"K75 (F6,D4)", "x":12, "y":1.5}, | |||
{"label":"K74 (F6,D5)", "x":13, "y":1.5}, | |||
{"label":"K73 (F6,D3)", "x":14, "y":1.5}, | |||
{"label":"K76 (F6,D6)", "x":15.25, "y":1.5}, | |||
{"label":"K72 (F6,D2)", "x":16.25, "y":1.5}, | |||
{"label":"K71 (F6,D1)", "x":17.25, "y":1.5}, | |||
{"label":"K20 (B1,D0)", "x":0, "y":2.5, "w":1.5}, | |||
{"label":"K21 (B1,D1)", "x":1.5, "y":2.5}, | |||
{"label":"K22 (B1,D2)", "x":2.5, "y":2.5}, | |||
{"label":"K23 (B1,D3)", "x":3.5, "y":2.5}, | |||
{"label":"K24 (B1,D5)", "x":4.5, "y":2.5}, | |||
{"label":"K25 (B1,D4)", "x":5.5, "y":2.5}, | |||
{"label":"K26 (B1,D6)", "x":6.5, "y":2.5}, | |||
{"label":"K27 (B1,D7)", "x":7.5, "y":2.5}, | |||
{"label":"K28 (B1,B4)", "x":8.5, "y":2.5}, | |||
{"label":"K88 (F5,B4)", "x":9.5, "y":2.5}, | |||
{"label":"K87 (F5,D7)", "x":10.5, "y":2.5}, | |||
{"label":"K85 (F5,D4)", "x":11.5, "y":2.5}, | |||
{"label":"K84 (F5,D5)", "x":12.5, "y":2.5}, | |||
{"label":"K94 (F4,D5)", "x":13.5, "y":2.5, "w":1.5}, | |||
{"label":"K86 (F5,D6)", "x":15.25, "y":2.5}, | |||
{"label":"K82 (F5,D2)", "x":16.25, "y":2.5}, | |||
{"label":"K81 (F5,D1)", "x":17.25, "y":2.5}, | |||
{"label":"K30 (B2,D0)", "x":0, "y":3.5, "w":1.75}, | |||
{"label":"K31 (B2,D1)", "x":1.75, "y":3.5}, | |||
{"label":"K32 (B2,D2)", "x":2.75, "y":3.5}, | |||
{"label":"K33 (B2,D3)", "x":3.75, "y":3.5}, | |||
{"label":"K34 (B2,D5)", "x":4.75, "y":3.5}, | |||
{"label":"K35 (B2,D4)", "x":5.75, "y":3.5}, | |||
{"label":"K36 (B2,D6)", "x":6.75, "y":3.5}, | |||
{"label":"K37 (B2,D7)", "x":7.75, "y":3.5}, | |||
{"label":"K38 (B2,B4)", "x":8.75, "y":3.5}, | |||
{"label":"K98 (F4,B4)", "x":9.75, "y":3.5}, | |||
{"label":"K97 (F4,D7)", "x":10.75, "y":3.5}, | |||
{"label":"K95 (F4,D4)", "x":11.75, "y":3.5}, | |||
{"label":"K83 (F5,D3)", "x":12.75, "y":3.5, "w":2.25}, | |||
{"label":"K40 (B3,D0)", "x":0, "y":4.5, "w":1.25}, | |||
{"label":"K41 (B3,D1)", "x":1.25, "y":4.5}, | |||
{"label":"K42 (B3,D2)", "x":2.25, "y":4.5}, | |||
{"label":"K43 (B3,D3)", "x":3.25, "y":4.5}, | |||
{"label":"K44 (B3,D5)", "x":4.25, "y":4.5}, | |||
{"label":"K45 (B3,D4)", "x":5.25, "y":4.5}, | |||
{"label":"K46 (B3,D6)", "x":6.25, "y":4.5}, | |||
{"label":"K47 (B3,D7)", "x":7.25, "y":4.5}, | |||
{"label":"K48 (B3,B4)", "x":8.25, "y":4.5}, | |||
{"label":"KA8 (F1,B4)", "x":9.25, "y":4.5}, | |||
{"label":"KA7 (F1,D7)", "x":10.25, "y":4.5}, | |||
{"label":"KA5 (F1,D4)", "x":11.25, "y":4.5}, | |||
{"label":"KA4 (F1,D5)", "x":12.25, "y":4.5, "w":1.75}, | |||
{"label":"KA3 (F1,D3)", "x":14, "y":4.5}, | |||
{"label":"K92 (F4,D2)", "x":16.25, "y":4.5}, | |||
{"label":"K50 (B7,D0)", "x":0, "y":5.5, "w":1.25}, | |||
{"label":"K51 (B7,D1)", "x":1.25, "y":5.5, "w":1.25}, | |||
{"label":"K52 (B7,D2)", "x":2.5, "y":5.5, "w":1.25}, | |||
{"label":"K56 (B7,D6)", "x":3.75, "y":5.5, "w":6.25}, | |||
{"label":"K58 (B7,B4)", "x":10, "y":5.5, "w":1.25}, | |||
{"label":"K57 (B7,D7)", "x":11.25, "y":5.5, "w":1.25}, | |||
{"label":"K54 (B7,D5)", "x":12.5, "y":5.5, "w":1.25}, | |||
{"label":"K53 (B7,D3)", "x":13.75, "y":5.5, "w":1.25}, | |||
{"label":"KA6 (F1,D6)", "x":15.25, "y":5.5}, | |||
{"label":"KA2 (F1,D2)", "x":16.25, "y":5.5}, | |||
{"label":"KA1 (F1,D1)", "x":17.25, "y":5.5} | |||
] | |||
}, | |||
"LAYOUT_ansi_standard": { | |||
"key_count": 88, | |||
"layout": [ | |||
{"label":"K00 (E6,D0)", "x":0, "y":0}, | |||
{"label":"K01 (E6,D1)", "x":1.25, "y":0}, | |||
{"label":"K02 (E6,D2)", "x":2.25, "y":0}, | |||
{"label":"K03 (E6,D3)", "x":3.25, "y":0}, | |||
{"label":"K04 (E6,D5)", "x":4.25, "y":0}, | |||
{"label":"K05 (E6,D4)", "x":5.5, "y":0}, | |||
{"label":"K06 (E6,D6)", "x":6.5, "y":0}, | |||
{"label":"K07 (E6,D7)", "x":7.5, "y":0}, | |||
{"label":"K08 (E6,B4)", "x":8.5, "y":0}, | |||
{"label":"K68 (F7,B4)", "x":9.75, "y":0}, | |||
{"label":"K67 (F7,D7)", "x":10.75, "y":0}, | |||
{"label":"K65 (F7,D4)", "x":11.75, "y":0}, | |||
{"label":"K64 (F7,D5)", "x":12.75, "y":0}, | |||
{"label":"K63 (F7,D3)", "x":14, "y":0}, | |||
{"label":"K66 (F7,D6)", "x":15.25, "y":0}, | |||
{"label":"K62 (F7,D2)", "x":16.25, "y":0}, | |||
{"label":"K61 (F7,D1)", "x":17.25, "y":0}, | |||
{"label":"K10 (B0,D0)", "x":0, "y":1.5}, | |||
{"label":"K11 (B0,D1)", "x":1, "y":1.5}, | |||
{"label":"K12 (B0,D2)", "x":2, "y":1.5}, | |||
{"label":"K13 (B0,D3)", "x":3, "y":1.5}, | |||
{"label":"K14 (B0,D5)", "x":4, "y":1.5}, | |||
{"label":"K15 (B0,D4)", "x":5, "y":1.5}, | |||
{"label":"K16 (B0,D6)", "x":6, "y":1.5}, | |||
{"label":"K17 (B0,D7)", "x":7, "y":1.5}, | |||
{"label":"K18 (B0,B4)", "x":8, "y":1.5}, | |||
{"label":"K78 (F6,B4)", "x":9, "y":1.5}, | |||
{"label":"K70 (F6,D0)", "x":10, "y":1.5}, | |||
{"label":"K77 (F6,D7)", "x":11, "y":1.5}, | |||
{"label":"K75 (F6,D4)", "x":12, "y":1.5}, | |||
{"label":"K73 (F6,D3)", "x":13, "y":1.5, "w":2}, | |||
{"label":"K76 (F6,D6)", "x":15.25, "y":1.5}, | |||
{"label":"K72 (F6,D2)", "x":16.25, "y":1.5}, | |||
{"label":"K71 (F6,D1)", "x":17.25, "y":1.5}, | |||
{"label":"K20 (B1,D0)", "x":0, "y":2.5, "w":1.5}, | |||
{"label":"K21 (B1,D1)", "x":1.5, "y":2.5}, | |||
{"label":"K22 (B1,D2)", "x":2.5, "y":2.5}, | |||
{"label":"K23 (B1,D3)", "x":3.5, "y":2.5}, | |||
{"label":"K24 (B1,D5)", "x":4.5, "y":2.5}, | |||
{"label":"K25 (B1,D4)", "x":5.5, "y":2.5}, | |||
{"label":"K26 (B1,D6)", "x":6.5, "y":2.5}, | |||
{"label":"K27 (B1,D7)", "x":7.5, "y":2.5}, | |||
{"label":"K28 (B1,B4)", "x":8.5, "y":2.5}, | |||
{"label":"K88 (F5,B4)", "x":9.5, "y":2.5}, | |||
{"label":"K87 (F5,D7)", "x":10.5, "y":2.5}, | |||
{"label":"K85 (F5,D4)", "x":11.5, "y":2.5}, | |||
{"label":"K84 (F5,D5)", "x":12.5, "y":2.5}, | |||
{"label":"K83 (F5,D3)", "x":13.5, "y":2.5, "w":1.5}, | |||
{"label":"K86 (F5,D6)", "x":15.25, "y":2.5}, | |||
{"label":"K82 (F5,D2)", "x":16.25, "y":2.5}, | |||
{"label":"K81 (F5,D1)", "x":17.25, "y":2.5}, | |||
{"label":"K30 (B2,D0)", "x":0, "y":3.5, "w":1.75}, | |||
{"label":"K31 (B2,D1)", "x":1.75, "y":3.5}, | |||
{"label":"K32 (B2,D2)", "x":2.75, "y":3.5}, | |||
{"label":"K33 (B2,D3)", "x":3.75, "y":3.5}, | |||
{"label":"K34 (B2,D5)", "x":4.75, "y":3.5}, | |||
{"label":"K35 (B2,D4)", "x":5.75, "y":3.5}, | |||
{"label":"K36 (B2,D6)", "x":6.75, "y":3.5}, | |||
{"label":"K37 (B2,D7)", "x":7.75, "y":3.5}, | |||
{"label":"K38 (B2,B4)", "x":8.75, "y":3.5}, | |||
{"label":"K98 (F4,B4)", "x":9.75, "y":3.5}, | |||
{"label":"K97 (F4,D7)", "x":10.75, "y":3.5}, | |||
{"label":"K95 (F4,D4)", "x":11.75, "y":3.5}, | |||
{"label":"K93 (F4,D3)", "x":12.75, "y":3.5, "w":2.25}, | |||
{"label":"K40 (B3,D0)", "x":0, "y":4.5, "w":2.25}, | |||
{"label":"K42 (B3,D2)", "x":2.25, "y":4.5}, | |||
{"label":"K43 (B3,D3)", "x":3.25, "y":4.5}, | |||
{"label":"K44 (B3,D5)", "x":4.25, "y":4.5}, | |||
{"label":"K45 (B3,D4)", "x":5.25, "y":4.5}, | |||
{"label":"K46 (B3,D6)", "x":6.25, "y":4.5}, | |||
{"label":"K47 (B3,D7)", "x":7.25, "y":4.5}, | |||
{"label":"K48 (B3,B4)", "x":8.25, "y":4.5}, | |||
{"label":"KA8 (F1,B4)", "x":9.25, "y":4.5}, | |||
{"label":"KA7 (F1,D7)", "x":10.25, "y":4.5}, | |||
{"label":"KA5 (F1,D4)", "x":11.25, "y":4.5}, | |||
{"label":"KA4 (F1,D5)", "x":12.25, "y":4.5, "w":2.75}, | |||
{"label":"K92 (F4,D2)", "x":16.25, "y":4.5}, | |||
{"label":"K50 (B7,D0)", "x":0, "y":5.5, "w":1.25}, | |||
{"label":"K51 (B7,D1)", "x":1.25, "y":5.5, "w":1.25}, | |||
{"label":"K52 (B7,D2)", "x":2.5, "y":5.5, "w":1.25}, | |||
{"label":"K56 (B7,D6)", "x":3.75, "y":5.5, "w":6.25}, | |||
{"label":"K58 (B7,B4)", "x":10, "y":5.5, "w":1.25}, | |||
{"label":"K57 (B7,D7)", "x":11.25, "y":5.5, "w":1.25}, | |||
{"label":"K54 (B7,D5)", "x":12.5, "y":5.5, "w":1.25}, | |||
{"label":"K53 (B7,D3)", "x":13.75, "y":5.5, "w":1.25}, | |||
{"label":"KA6 (F1,D6)", "x":15.25, "y":5.5}, | |||
{"label":"KA2 (F1,D2)", "x":16.25, "y":5.5}, | |||
{"label":"KA1 (F1,D1)", "x":17.25, "y":5.5} | |||
] | |||
}, | |||
"LAYOUT_ansi_tsangan": { | |||
"key_count": 87, | |||
"layout": [ | |||
{"label":"K00 (E6,D0)", "x":0, "y":0}, | |||
{"label":"K01 (E6,D1)", "x":1.25, "y":0}, | |||
{"label":"K02 (E6,D2)", "x":2.25, "y":0}, | |||
{"label":"K03 (E6,D3)", "x":3.25, "y":0}, | |||
{"label":"K04 (E6,D5)", "x":4.25, "y":0}, | |||
{"label":"K05 (E6,D4)", "x":5.5, "y":0}, | |||
{"label":"K06 (E6,D6)", "x":6.5, "y":0}, | |||
{"label":"K07 (E6,D7)", "x":7.5, "y":0}, | |||
{"label":"K08 (E6,B4)", "x":8.5, "y":0}, | |||
{"label":"K68 (F7,B4)", "x":9.75, "y":0}, | |||
{"label":"K67 (F7,D7)", "x":10.75, "y":0}, | |||
{"label":"K65 (F7,D4)", "x":11.75, "y":0}, | |||
{"label":"K64 (F7,D5)", "x":12.75, "y":0}, | |||
{"label":"K63 (F7,D3)", "x":14, "y":0}, | |||
{"label":"K66 (F7,D6)", "x":15.25, "y":0}, | |||
{"label":"K62 (F7,D2)", "x":16.25, "y":0}, | |||
{"label":"K61 (F7,D1)", "x":17.25, "y":0}, | |||
{"label":"K10 (B0,D0)", "x":0, "y":1.5}, | |||
{"label":"K11 (B0,D1)", "x":1, "y":1.5}, | |||
{"label":"K12 (B0,D2)", "x":2, "y":1.5}, | |||
{"label":"K13 (B0,D3)", "x":3, "y":1.5}, | |||
{"label":"K14 (B0,D5)", "x":4, "y":1.5}, | |||
{"label":"K15 (B0,D4)", "x":5, "y":1.5}, | |||
{"label":"K16 (B0,D6)", "x":6, "y":1.5}, | |||
{"label":"K17 (B0,D7)", "x":7, "y":1.5}, | |||
{"label":"K18 (B0,B4)", "x":8, "y":1.5}, | |||
{"label":"K78 (F6,B4)", "x":9, "y":1.5}, | |||
{"label":"K70 (F6,D0)", "x":10, "y":1.5}, | |||
{"label":"K77 (F6,D7)", "x":11, "y":1.5}, | |||
{"label":"K75 (F6,D4)", "x":12, "y":1.5}, | |||
{"label":"K73 (F6,D3)", "x":13, "y":1.5, "w":2}, | |||
{"label":"K76 (F6,D6)", "x":15.25, "y":1.5}, | |||
{"label":"K72 (F6,D2)", "x":16.25, "y":1.5}, | |||
{"label":"K71 (F6,D1)", "x":17.25, "y":1.5}, | |||
{"label":"K20 (B1,D0)", "x":0, "y":2.5, "w":1.5}, | |||
{"label":"K21 (B1,D1)", "x":1.5, "y":2.5}, | |||
{"label":"K22 (B1,D2)", "x":2.5, "y":2.5}, | |||
{"label":"K23 (B1,D3)", "x":3.5, "y":2.5}, | |||
{"label":"K24 (B1,D5)", "x":4.5, "y":2.5}, | |||
{"label":"K25 (B1,D4)", "x":5.5, "y":2.5}, | |||
{"label":"K26 (B1,D6)", "x":6.5, "y":2.5}, | |||
{"label":"K27 (B1,D7)", "x":7.5, "y":2.5}, | |||
{"label":"K28 (B1,B4)", "x":8.5, "y":2.5}, | |||
{"label":"K88 (F5,B4)", "x":9.5, "y":2.5}, | |||
{"label":"K87 (F5,D7)", "x":10.5, "y":2.5}, | |||
{"label":"K85 (F5,D4)", "x":11.5, "y":2.5}, | |||
{"label":"K84 (F5,D5)", "x":12.5, "y":2.5}, | |||
{"label":"K83 (F5,D3)", "x":13.5, "y":2.5, "w":1.5}, | |||
{"label":"K86 (F5,D6)", "x":15.25, "y":2.5}, | |||
{"label":"K82 (F5,D2)", "x":16.25, "y":2.5}, | |||
{"label":"K81 (F5,D1)", "x":17.25, "y":2.5}, | |||
{"label":"K30 (B2,D0)", "x":0, "y":3.5, "w":1.75}, | |||
{"label":"K31 (B2,D1)", "x":1.75, "y":3.5}, | |||
{"label":"K32 (B2,D2)", "x":2.75, "y":3.5}, | |||
{"label":"K33 (B2,D3)", "x":3.75, "y":3.5}, | |||
{"label":"K34 (B2,D5)", "x":4.75, "y":3.5}, | |||
{"label":"K35 (B2,D4)", "x":5.75, "y":3.5}, | |||
{"label":"K36 (B2,D6)", "x":6.75, "y":3.5}, | |||
{"label":"K37 (B2,D7)", "x":7.75, "y":3.5}, | |||
{"label":"K38 (B2,B4)", "x":8.75, "y":3.5}, | |||
{"label":"K98 (F4,B4)", "x":9.75, "y":3.5}, | |||
{"label":"K97 (F4,D7)", "x":10.75, "y":3.5}, | |||
{"label":"K95 (F4,D4)", "x":11.75, "y":3.5}, | |||
{"label":"K93 (F4,D3)", "x":12.75, "y":3.5, "w":2.25}, | |||
{"label":"K40 (B3,D0)", "x":0, "y":4.5, "w":2.25}, | |||
{"label":"K42 (B3,D2)", "x":2.25, "y":4.5}, | |||
{"label":"K43 (B3,D3)", "x":3.25, "y":4.5}, | |||
{"label":"K44 (B3,D5)", "x":4.25, "y":4.5}, | |||
{"label":"K45 (B3,D4)", "x":5.25, "y":4.5}, | |||
{"label":"K46 (B3,D6)", "x":6.25, "y":4.5}, | |||
{"label":"K47 (B3,D7)", "x":7.25, "y":4.5}, | |||
{"label":"K48 (B3,B4)", "x":8.25, "y":4.5}, | |||
{"label":"KA8 (F1,B4)", "x":9.25, "y":4.5}, | |||
{"label":"KA7 (F1,D7)", "x":10.25, "y":4.5}, | |||
{"label":"KA5 (F1,D4)", "x":11.25, "y":4.5}, | |||
{"label":"KA4 (F1,D5)", "x":12.25, "y":4.5, "w":2.75}, | |||
{"label":"K92 (F4,D2)", "x":16.25, "y":4.5}, | |||
{"label":"K50 (B7,D0)", "x":0, "y":5.5, "w":1.5}, | |||
{"label":"K51 (B7,D1)", "x":1.5, "y":5.5}, | |||
{"label":"K52 (B7,D2)", "x":2.5, "y":5.5, "w":1.5}, | |||
{"label":"K56 (B7,D6)", "x":4, "y":5.5, "w":7}, | |||
{"label":"K57 (B7,D7)", "x":11, "y":5.5, "w":1.5}, | |||
{"label":"K54 (B7,D5)", "x":12.5, "y":5.5}, | |||
{"label":"K53 (B7,D3)", "x":13.5, "y":5.5, "w":1.5}, | |||
{"label":"KA6 (F1,D6)", "x":15.25, "y":5.5}, | |||
{"label":"KA2 (F1,D2)", "x":16.25, "y":5.5}, | |||
{"label":"KA1 (F1,D1)", "x":17.25, "y":5.5} | |||
] | |||
} | |||
} | |||
,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" | |||
} |
@ -0,0 +1,37 @@ | |||
/* Copyright 2020 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ansi_tsangan( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(1), KC_PSCR, KC_SLCK, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT_ansi_tsangan( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_MOD, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1,37 @@ | |||
/* Copyright 2020 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ansi_standard( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(1), KC_PSCR, KC_SLCK, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT_ansi_standard( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_MOD, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1,37 @@ | |||
/* Copyright 2020 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ansi_tsangan( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(1), KC_PSCR, KC_SLCK, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT_ansi_tsangan( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_MOD, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
#define DYNAMIC_KEYMAP_LAYER_COUNT 3 |
@ -0,0 +1,45 @@ | |||
/* Copyright 2020 MechMerlin | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_ansi_tsangan( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MO(1), KC_PSCR, KC_SLCK, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT_ansi_tsangan( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
RGB_MOD, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[2] = LAYOUT_ansi_tsangan( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1,3 @@ | |||
VIA_ENABLE = yes | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration |
@ -0,0 +1,17 @@ | |||
# Exclusive E8.5 Hotswap | |||
Custom hotswap PCB for Exclusive E8.5. | |||
The switch matrix is identical between all three PCB variants of this board. Choose the correct LAYOUT that best matches the physical LAYOUT of your PCB. | |||
* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) | |||
* Hardware Supported: E8.5 Hotswap/Soldered, atmega32u4 | |||
* Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=103520) | |||
Make example for this keyboard (after setting up your build environment): | |||
make exclusive/e85:default | |||
**Reset Key**: The board can be reset by shorting the two holes underneath the PCB, or pressing the reset button on the reverse side. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,32 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
LTO_ENABLE = yes |