* z150 black pill * z150 docs * z150: json layout * Update keyboards/handwired/z150/keymaps/zyxx/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/z150/rules.mk Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/z150/rules.mk Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/z150/z150.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/z150/config.h Co-authored-by: Joel Challis <git@zvecr.com> * Delete bootloader_defs.h Useless file * Update keyboards/handwired/z150/readme.md Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com>pull/9839/head
@ -0,0 +1,714 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file rt/templates/chconf.h | |||
* @brief Configuration file template. | |||
* @details A copy of this file must be placed in each project directory, it | |||
* contains the application specific kernel settings. | |||
* | |||
* @addtogroup config | |||
* @details Kernel related settings and hooks. | |||
* @{ | |||
*/ | |||
#ifndef CHCONF_H | |||
#define CHCONF_H | |||
#define _CHIBIOS_RT_CONF_ | |||
#define _CHIBIOS_RT_CONF_VER_6_0_ | |||
/*===========================================================================*/ | |||
/** | |||
* @name System timers settings | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System time counter resolution. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#if !defined(CH_CFG_ST_RESOLUTION) | |||
#define CH_CFG_ST_RESOLUTION 32 | |||
#endif | |||
/** | |||
* @brief System tick frequency. | |||
* @details Frequency of the system timer that drives the system ticks. This | |||
* setting also defines the system tick time unit. | |||
*/ | |||
#if !defined(CH_CFG_ST_FREQUENCY) | |||
#define CH_CFG_ST_FREQUENCY 100000 | |||
#endif | |||
/** | |||
* @brief Time intervals data size. | |||
* @note Allowed values are 16, 32 or 64 bits. | |||
*/ | |||
#if !defined(CH_CFG_INTERVALS_SIZE) | |||
#define CH_CFG_INTERVALS_SIZE 32 | |||
#endif | |||
/** | |||
* @brief Time types data size. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
#if !defined(CH_CFG_TIME_TYPES_SIZE) | |||
#define CH_CFG_TIME_TYPES_SIZE 32 | |||
#endif | |||
/** | |||
* @brief Time delta constant for the tick-less mode. | |||
* @note If this value is zero then the system uses the classic | |||
* periodic tick. This value represents the minimum number | |||
* of ticks that is safe to specify in a timeout directive. | |||
* The value one is not valid, timeouts are rounded up to | |||
* this value. | |||
*/ | |||
#if !defined(CH_CFG_ST_TIMEDELTA) | |||
#define CH_CFG_ST_TIMEDELTA 0 | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel parameters and options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Round robin interval. | |||
* @details This constant is the number of system ticks allowed for the | |||
* threads before preemption occurs. Setting this value to zero | |||
* disables the preemption for threads with equal priority and the | |||
* round robin becomes cooperative. Note that higher priority | |||
* threads can still preempt, the kernel is always preemptive. | |||
* @note Disabling the round robin preemption makes the kernel more compact | |||
* and generally faster. | |||
* @note The round robin preemption is not supported in tickless mode and | |||
* must be set to zero in that case. | |||
*/ | |||
#if !defined(CH_CFG_TIME_QUANTUM) | |||
#define CH_CFG_TIME_QUANTUM 0 | |||
#endif | |||
/** | |||
* @brief Managed RAM size. | |||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||
* then the whole available RAM is used. The core memory is made | |||
* available to the heap allocator and/or can be used directly through | |||
* the simplified core memory allocator. | |||
* | |||
* @note In order to let the OS manage the whole RAM the linker script must | |||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||
*/ | |||
#if !defined(CH_CFG_MEMCORE_SIZE) | |||
#define CH_CFG_MEMCORE_SIZE 0 | |||
#endif | |||
/** | |||
* @brief Idle thread automatic spawn suppression. | |||
* @details When this option is activated the function @p chSysInit() | |||
* does not spawn the idle thread. The application @p main() | |||
* function becomes the idle thread and must implement an | |||
* infinite loop. | |||
*/ | |||
#if !defined(CH_CFG_NO_IDLE_THREAD) | |||
#define CH_CFG_NO_IDLE_THREAD FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Performance options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief OS optimization. | |||
* @details If enabled then time efficient rather than space efficient code | |||
* is used when two possible implementations exist. | |||
* | |||
* @note This is not related to the compiler optimization options. | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_OPTIMIZE_SPEED) | |||
#define CH_CFG_OPTIMIZE_SPEED TRUE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Subsystem options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Time Measurement APIs. | |||
* @details If enabled then the time measurement APIs are included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_TM) | |||
#define CH_CFG_USE_TM FALSE | |||
#endif | |||
/** | |||
* @brief Threads registry APIs. | |||
* @details If enabled then the registry APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_REGISTRY) | |||
#define CH_CFG_USE_REGISTRY TRUE | |||
#endif | |||
/** | |||
* @brief Threads synchronization APIs. | |||
* @details If enabled then the @p chThdWait() function is included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_WAITEXIT) | |||
#define CH_CFG_USE_WAITEXIT TRUE | |||
#endif | |||
/** | |||
* @brief Semaphores APIs. | |||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_SEMAPHORES) | |||
#define CH_CFG_USE_SEMAPHORES TRUE | |||
#endif | |||
/** | |||
* @brief Semaphores queuing mode. | |||
* @details If enabled then the threads are enqueued on semaphores by | |||
* priority rather than in FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) | |||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
#endif | |||
/** | |||
* @brief Mutexes APIs. | |||
* @details If enabled then the mutexes APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MUTEXES) | |||
#define CH_CFG_USE_MUTEXES TRUE | |||
#endif | |||
/** | |||
* @brief Enables recursive behavior on mutexes. | |||
* @note Recursive mutexes are heavier and have an increased | |||
* memory footprint. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) | |||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
#endif | |||
/** | |||
* @brief Conditional Variables APIs. | |||
* @details If enabled then the conditional variables APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
#if !defined(CH_CFG_USE_CONDVARS) | |||
#define CH_CFG_USE_CONDVARS TRUE | |||
#endif | |||
/** | |||
* @brief Conditional Variables APIs with timeout. | |||
* @details If enabled then the conditional variables APIs with timeout | |||
* specification are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||
*/ | |||
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) | |||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE | |||
#endif | |||
/** | |||
* @brief Events Flags APIs. | |||
* @details If enabled then the event flags APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_EVENTS) | |||
#define CH_CFG_USE_EVENTS TRUE | |||
#endif | |||
/** | |||
* @brief Events Flags APIs with timeout. | |||
* @details If enabled then the events APIs with timeout specification | |||
* are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_EVENTS. | |||
*/ | |||
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) | |||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
#endif | |||
/** | |||
* @brief Synchronous Messages APIs. | |||
* @details If enabled then the synchronous messages APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MESSAGES) | |||
#define CH_CFG_USE_MESSAGES TRUE | |||
#endif | |||
/** | |||
* @brief Synchronous Messages queuing mode. | |||
* @details If enabled then messages are served by priority rather than in | |||
* FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||
*/ | |||
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) | |||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||
#endif | |||
/** | |||
* @brief Mailboxes APIs. | |||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
* included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
#if !defined(CH_CFG_USE_MAILBOXES) | |||
#define CH_CFG_USE_MAILBOXES TRUE | |||
#endif | |||
/** | |||
* @brief Core Memory Manager APIs. | |||
* @details If enabled then the core memory manager APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MEMCORE) | |||
#define CH_CFG_USE_MEMCORE TRUE | |||
#endif | |||
/** | |||
* @brief Heap Allocator APIs. | |||
* @details If enabled then the memory heap allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
* @p CH_CFG_USE_SEMAPHORES. | |||
* @note Mutexes are recommended. | |||
*/ | |||
#if !defined(CH_CFG_USE_HEAP) | |||
#define CH_CFG_USE_HEAP TRUE | |||
#endif | |||
/** | |||
* @brief Memory Pools Allocator APIs. | |||
* @details If enabled then the memory pools allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_MEMPOOLS) | |||
#define CH_CFG_USE_MEMPOOLS FALSE | |||
#endif | |||
/** | |||
* @brief Objects FIFOs APIs. | |||
* @details If enabled then the objects FIFOs APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_OBJ_FIFOS) | |||
#define CH_CFG_USE_OBJ_FIFOS FALSE | |||
#endif | |||
/** | |||
* @brief Pipes APIs. | |||
* @details If enabled then the pipes APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
#if !defined(CH_CFG_USE_PIPES) | |||
#define CH_CFG_USE_PIPES FALSE | |||
#endif | |||
/** | |||
* @brief Dynamic Threads APIs. | |||
* @details If enabled then the dynamic threads creation APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
*/ | |||
#if !defined(CH_CFG_USE_DYNAMIC) | |||
#define CH_CFG_USE_DYNAMIC FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Objects factory options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Objects Factory APIs. | |||
* @details If enabled then the objects factory APIs are included in the | |||
* kernel. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_CFG_USE_FACTORY) | |||
#define CH_CFG_USE_FACTORY FALSE | |||
#endif | |||
/** | |||
* @brief Maximum length for object names. | |||
* @details If the specified length is zero then the name is stored by | |||
* pointer but this could have unintended side effects. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) | |||
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 | |||
#endif | |||
/** | |||
* @brief Enables the registry of generic objects. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) | |||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for generic buffers. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) | |||
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for semaphores. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_SEMAPHORES) | |||
#define CH_CFG_FACTORY_SEMAPHORES FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for mailboxes. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_MAILBOXES) | |||
#define CH_CFG_FACTORY_MAILBOXES FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for objects FIFOs. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) | |||
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE | |||
#endif | |||
/** | |||
* @brief Enables factory for Pipes. | |||
*/ | |||
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) | |||
#define CH_CFG_FACTORY_PIPES FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Debug options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Debug option, kernel statistics. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_STATISTICS) | |||
#define CH_DBG_STATISTICS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, system state check. | |||
* @details If enabled the correct call protocol for system APIs is checked | |||
* at runtime. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) | |||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, parameters checks. | |||
* @details If enabled then the checks on the API functions input | |||
* parameters are activated. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_ENABLE_CHECKS) | |||
#define CH_DBG_ENABLE_CHECKS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, consistency checks. | |||
* @details If enabled then all the assertions in the kernel code are | |||
* activated. This includes consistency checks inside the kernel, | |||
* runtime anomalies and port-defined checks. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_ENABLE_ASSERTS) | |||
#define CH_DBG_ENABLE_ASSERTS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, trace buffer. | |||
* @details If enabled then the trace buffer is activated. | |||
* | |||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#if !defined(CH_DBG_TRACE_MASK) | |||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
#endif | |||
/** | |||
* @brief Trace buffer entries. | |||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
#if !defined(CH_DBG_TRACE_BUFFER_SIZE) | |||
#define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
#endif | |||
/** | |||
* @brief Debug option, stack checks. | |||
* @details If enabled then a runtime stack check is performed. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note The stack check is performed in a architecture/port dependent way. | |||
* It may not be implemented or some ports. | |||
* @note The default failure mode is to halt the system with the global | |||
* @p panic_msg variable set to @p NULL. | |||
*/ | |||
#if !defined(CH_DBG_ENABLE_STACK_CHECK) | |||
#define CH_DBG_ENABLE_STACK_CHECK FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, stacks initialization. | |||
* @details If enabled then the threads working area is filled with a byte | |||
* value when a thread is created. This can be useful for the | |||
* runtime measurement of the used stack. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
#if !defined(CH_DBG_FILL_THREADS) | |||
#define CH_DBG_FILL_THREADS FALSE | |||
#endif | |||
/** | |||
* @brief Debug option, threads profiling. | |||
* @details If enabled then a field is added to the @p thread_t structure that | |||
* counts the system ticks occurred while executing the thread. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note This debug option is not currently compatible with the | |||
* tickless mode. | |||
*/ | |||
#if !defined(CH_DBG_THREADS_PROFILING) | |||
#define CH_DBG_THREADS_PROFILING FALSE | |||
#endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel hooks | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System structure extension. | |||
* @details User fields added to the end of the @p ch_system_t structure. | |||
*/ | |||
#define CH_CFG_SYSTEM_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief System initialization hook. | |||
* @details User initialization code added to the @p chSysInit() function | |||
* just before interrupts are enabled globally. | |||
*/ | |||
#define CH_CFG_SYSTEM_INIT_HOOK() { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads descriptor structure extension. | |||
* @details User fields added to the end of the @p thread_t structure. | |||
*/ | |||
#define CH_CFG_THREAD_EXTRA_FIELDS \ | |||
/* Add threads custom fields here.*/ | |||
/** | |||
* @brief Threads initialization hook. | |||
* @details User initialization code added to the @p _thread_init() function. | |||
* | |||
* @note It is invoked from within @p _thread_init() and implicitly from all | |||
* the threads creation APIs. | |||
*/ | |||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ | |||
/* Add threads initialization code here.*/ \ | |||
} | |||
/** | |||
* @brief Threads finalization hook. | |||
* @details User finalization code added to the @p chThdExit() API. | |||
*/ | |||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ | |||
/* Add threads finalization code here.*/ \ | |||
} | |||
/** | |||
* @brief Context switch hook. | |||
* @details This hook is invoked just before switching between threads. | |||
*/ | |||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ | |||
/* Context switch code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR enter hook. | |||
*/ | |||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ | |||
/* IRQ prologue code here.*/ \ | |||
} | |||
/** | |||
* @brief ISR exit hook. | |||
*/ | |||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ | |||
/* IRQ epilogue code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread enter hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to activate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_ENTER_HOOK() { \ | |||
/* Idle-enter code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle thread leave hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to deactivate a power saving mode. | |||
*/ | |||
#define CH_CFG_IDLE_LEAVE_HOOK() { \ | |||
/* Idle-leave code here.*/ \ | |||
} | |||
/** | |||
* @brief Idle Loop hook. | |||
* @details This hook is continuously invoked by the idle thread loop. | |||
*/ | |||
#define CH_CFG_IDLE_LOOP_HOOK() { \ | |||
/* Idle loop code here.*/ \ | |||
} | |||
/** | |||
* @brief System tick event hook. | |||
* @details This hook is invoked in the system tick handler immediately | |||
* after processing the virtual timers queue. | |||
*/ | |||
#define CH_CFG_SYSTEM_TICK_HOOK() { \ | |||
/* System tick event code here.*/ \ | |||
} | |||
/** | |||
* @brief System halt hook. | |||
* @details This hook is invoked in case to a system halting error before | |||
* the system is halted. | |||
*/ | |||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ | |||
/* System halt code here.*/ \ | |||
} | |||
/** | |||
* @brief Trace hook. | |||
* @details This hook is invoked each time a new record is written in the | |||
* trace buffer. | |||
*/ | |||
#define CH_CFG_TRACE_HOOK(tep) { \ | |||
/* Trace code here.*/ \ | |||
} | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
/*===========================================================================*/ | |||
#endif /* CHCONF_H */ | |||
/** @} */ |
@ -0,0 +1,92 @@ | |||
/* | |||
Copyright 2020 DmNosachev | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0000 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER ALPS | |||
#define PRODUCT Z150 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 11 | |||
#define MATRIX_COLS 8 | |||
#define MATRIX_ROW_PINS { B13, B14, B15, A8, A9, A3, A10, A1, A2, A15, A0 } | |||
#define MATRIX_COL_PINS { B11, B10, B1, B0, A7, A6, A5, A4 } | |||
#define UNUSED_PINS | |||
#define NUM_LOCK_LED_PIN B5 | |||
#define SCROLL_LOCK_LED_PIN B4 | |||
#define CAPS_LOCK_LED_PIN B3 | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
//#define BOOTMAGIC_LITE_ROW 0 | |||
//#define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,525 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef HALCONF_H | |||
#define HALCONF_H | |||
#define _CHIBIOS_HAL_CONF_ | |||
#define _CHIBIOS_HAL_CONF_VER_7_0_ | |||
#include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_PAL TRUE | |||
#endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
#define HAL_USE_ADC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
#define HAL_USE_CAN FALSE | |||
#endif | |||
/** | |||
* @brief Enables the cryptographic subsystem. | |||
*/ | |||
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) | |||
#define HAL_USE_CRY FALSE | |||
#endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_DAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
#define HAL_USE_GPT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2C FALSE | |||
#endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
#define HAL_USE_I2S FALSE | |||
#endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
#define HAL_USE_ICU FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
#define HAL_USE_MAC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_MMC_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
#define HAL_USE_PWM TRUE | |||
#endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
#define HAL_USE_RTC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
#define HAL_USE_SDC FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_SERIAL_USB FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SIO subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) | |||
#define HAL_USE_SIO FALSE | |||
#endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_SPI FALSE | |||
#endif | |||
/** | |||
* @brief Enables the TRNG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) | |||
#define HAL_USE_TRNG FALSE | |||
#endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
#define HAL_USE_UART FALSE | |||
#endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
#define HAL_USE_USB TRUE | |||
#endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
#define HAL_USE_WDG FALSE | |||
#endif | |||
/** | |||
* @brief Enables the WSPI subsystem. | |||
*/ | |||
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) | |||
#define HAL_USE_WSPI FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* PAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
#define PAL_USE_CALLBACKS FALSE | |||
#endif | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) | |||
#define PAL_USE_WAIT FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define ADC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
#define CAN_USE_SLEEP_MODE TRUE | |||
#endif | |||
/** | |||
* @brief Enforces the driver to use direct callbacks rather than OSAL events. | |||
*/ | |||
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
#define CAN_ENFORCE_USE_CALLBACKS FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* CRY driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the SW fall-back of the cryptographic driver. | |||
* @details When enabled, this option, activates a fall-back software | |||
* implementation for algorithms not supported by the underlying | |||
* hardware. | |||
* @note Fall-back implementations may not be present for all algorithms. | |||
*/ | |||
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) | |||
#define HAL_CRY_USE_FALLBACK FALSE | |||
#endif | |||
/** | |||
* @brief Makes the driver forcibly use the fall-back implementations. | |||
*/ | |||
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) | |||
#define HAL_CRY_ENFORCE_FALLBACK FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* DAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) | |||
#define DAC_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define DAC_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the zero-copy API. | |||
*/ | |||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
#define MAC_USE_ZERO_COPY FALSE | |||
#endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
#define MAC_USE_EVENTS TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define MMC_NICE_WAITING TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
#define SDC_INIT_RETRY 100 | |||
#endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
#define SDC_MMC_SUPPORT FALSE | |||
#endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
#define SDC_NICE_WAITING TRUE | |||
#endif | |||
/** | |||
* @brief OCR initialization constant for V20 cards. | |||
*/ | |||
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) | |||
#define SDC_INIT_OCR_V20 0x50FF8000U | |||
#endif | |||
/** | |||
* @brief OCR initialization constant for non-V20 cards. | |||
*/ | |||
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) | |||
#define SDC_INIT_OCR 0x80100000U | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
#define SERIAL_DEFAULT_BITRATE 38400 | |||
#endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 16 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_BUFFERS_SIZE 16 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 256 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_SIZE 1 | |||
#endif | |||
/** | |||
* @brief Serial over USB number of buffers. | |||
* @note The default is 2 buffers. | |||
*/ | |||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||
#define SERIAL_USB_BUFFERS_NUMBER 2 | |||
#endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define SPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables circular transfers APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) | |||
#define SPI_USE_CIRCULAR FALSE | |||
#endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
/** | |||
* @brief Handling method for SPI CS line. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) | |||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
#endif | |||
/*===========================================================================*/ | |||
/* UART driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||
#define UART_USE_WAIT FALSE | |||
#endif | |||
/** | |||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define UART_USE_MUTUAL_EXCLUSION FALSE | |||
#endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
#define USB_USE_WAIT TRUE | |||
#endif | |||
/*===========================================================================*/ | |||
/* WSPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) | |||
#define WSPI_USE_WAIT TRUE | |||
#endif | |||
/** | |||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
#define WSPI_USE_MUTUAL_EXCLUSION TRUE | |||
#endif | |||
#endif /* HALCONF_H */ | |||
/** @} */ |
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "z150", | |||
"url": "", | |||
"maintainer": "DmNosachev", | |||
"width": 21.25, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"Esc", "x":2.5, "y":0}, {"label":"!", "x":3.5, "y":0}, {"label":"@", "x":4.5, "y":0}, {"label":"#", "x":5.5, "y":0}, {"label":"$", "x":6.5, "y":0}, {"label":"%", "x":7.5, "y":0}, {"label":"^", "x":8.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":1.75}, {"label":"", "x":17.25, "y":0}, {"label":"", "x":18.25, "y":0, "w":1.5}, {"label":"", "x":19.75, "y":0, "w":1.5}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.5, "y":1, "w":1.5}, {"label":"Q", "x":4, "y":1}, {"label":"W", "x":5, "y":1}, {"label":"E", "x":6, "y":1}, {"label":"R", "x":7, "y":1}, {"label":"T", "x":8, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1, "w":1.25}, {"label":"7", "x":17.25, "y":1}, {"label":"8", "x":18.25, "y":1}, {"label":"9", "x":19.25, "y":1}, {"label":"PrtSc", "x":20.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Ctrl", "x":2.5, "y":2, "w":1.75}, {"label":"A", "x":4.25, "y":2}, {"label":"S", "x":5.25, "y":2}, {"label":"D", "x":6.25, "y":2}, {"label":"F", "x":7.25, "y":2}, {"label":"G", "x":8.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2}, {"label":"4", "x":17.25, "y":2}, {"label":"5", "x":18.25, "y":2}, {"label":"6", "x":19.25, "y":2}, {"label":"\u0432\u0402\u201c", "x":20.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.5, "y":3, "w":2.25}, {"label":"Z", "x":4.75, "y":3}, {"label":"X", "x":5.75, "y":3}, {"label":"C", "x":6.75, "y":3}, {"label":"V", "x":7.75, "y":3}, {"label":"B", "x":8.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":1.5}, {"label":"|", "x":16.25, "y":3}, {"label":"1", "x":17.25, "y":3}, {"label":"2", "x":18.25, "y":3}, {"label":"6", "x":19.25, "y":3}, {"label":"+", "x":20.25, "y":3, "h":2}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.75}, {"label":"~", "x":4.25, "y":4}, {"x":5.25, "y":4, "w":9}, {"label":"CapsLock", "x":14.25, "y":4, "w":2}, {"label":"0", "x":16.25, "y":4, "w":2}, {"label":".", "x":18.25, "y":4, "w":2}] | |||
} | |||
} | |||
} |
@ -0,0 +1,39 @@ | |||
/* Copyright 2020 DmNosachev | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* | |||
* ,---------------------------------------------------------------------------------------------------------------------------. | |||
* | F1 | F2 | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Backspace|NumLk| ScrLk | SysRQ | | |||
* |---------------------------------------------------------------------------------------------------------------------------| | |||
* | F3 | F4 | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | | 7 | 8 | 9 |PrnSc| | |||
* |--------------------------------------------------------------------------------------------- ------------------------| | |||
* | F5 | F6 | Ctrl | A | S | D | F | G | H | J | K | L | ;: | '" | Enter | 4 | 5 | 6 | - | | |||
* |---------------------------------------------------------------------------------------------------------------------------| | |||
* | F7 | F8 | Shift | Z | X | C | V | B | N | M | , | . | /? | Shift | |\ | 1 | 2 | 3 | + | | |||
* |---------------------------------------------------------------------------------------------------------------------- | | |||
* | F9 | F10 | Alt | ~` | Space | CapsLk | 0 Ins | . Del | | | |||
* `---------------------------------------------------------------------------------------------------------------------------' | |||
*/ | |||
[0] = LAYOUT( | |||
KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_SLCK, KC_PAUS, | |||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, KC_PSCR, | |||
KC_F5, KC_F6, KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PMNS, | |||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS, KC_P1, KC_P2, KC_P3, KC_PPLS, | |||
KC_F9, KC_F10,KC_LALT, KC_GRV, KC_SPC, KC_CAPS, KC_P0, KC_PDOT | |||
) | |||
}; |
@ -0,0 +1,65 @@ | |||
/* Copyright 2020 DmNosachev | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { | |||
_BASE, | |||
_FN1 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* | |||
* ,---------------------------------------------------------------------------------------------------------------------------. | |||
* | F1 | F2 | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Backspace| ~` | ScrLk | FN1 | | |||
* |---------------------------------------------------------------------------------------------------------------------------| | |||
* | F3 | F4 | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | |Home | ↑ |PgUp |PrnSc| | |||
* |--------------------------------------------------------------------------------------------- ------------------------| | |||
* | F5 | F6 | Ctrl | A | S | D | F | G | H | J | K | L | ;: | '" | Enter | ← | ↓ | → | wh+ | | |||
* |---------------------------------------------------------------------------------------------------------------------------| | |||
* | F7 | F8 | Shift | Z | X | C | V | B | N | M | , | . | /? | Shift | |\ |End | |PgDn | wh- | | |||
* |---------------------------------------------------------------------------------------------------------------------- | | |||
* | F9 | F10 | Alt |FN1 | Space | Alt | Ins | Del | | | |||
* `---------------------------------------------------------------------------------------------------------------------------' | |||
*/ | |||
[_BASE] = LAYOUT( | |||
KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_SLCK, MO(_FN1), | |||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_HOME, KC_UP, KC_PGUP, KC_PSCR, | |||
KC_F5, KC_F6, KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LEFT, KC_DOWN, KC_RGHT, KC_WH_U, | |||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS, KC_END, KC_NO, KC_PGDN, KC_WH_D, | |||
KC_F9, KC_F10,KC_LALT, MO(_FN1), KC_SPC, KC_RALT, KC_INS, KC_DEL | |||
), | |||
/* | |||
* ,---------------------------------------------------------------------------------------------------------------------------. | |||
* |reset| | | F11 | F12 | au+ | au- | clk | clk+| clk-| clkr| | | | | Delete |NumLk| / | FN1 | | |||
* |---------------------------------------------------------------------------------------------------------------------------| | |||
* | | | | | mlb | m↑ | mrb | | | | | | | | | | 7 | 8 | 9 | * | | |||
* |--------------------------------------------------------------------------------------------- ------------------------| | |||
* | | | | | m← | m↓ | m→ | | | | | | | | | 4 | 5 | 6 | - | | |||
* |---------------------------------------------------------------------------------------------------------------------------| | |||
* | | | | | | | | | | | | | | | | 1 | 2 | 3 | + | | |||
* |---------------------------------------------------------------------------------------------------------------------- | | |||
* | | | |FN1 | | CapsLock| 0 Ins | . Del | | | |||
* `---------------------------------------------------------------------------------------------------------------------------' | |||
*/ | |||
[_FN1] = LAYOUT( | |||
RESET, _______, _______, KC_F11, KC_F12, AU_ON, AU_OFF, CK_TOGG, CK_UP, CK_DOWN, CK_RST, _______, _______, _______, _______, KC_DEL, KC_NLCK, KC_PSLS, _______, | |||
_______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, _______, _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PAST, | |||
_______, _______, _______ , _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PMNS, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, | |||
_______, _______, _______, _______, _______, KC_CAPS, KC_P0, KC_PDOT | |||
) | |||
}; |
@ -0,0 +1,209 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef _MCUCONF_H_ | |||
#define _MCUCONF_H_ | |||
#define STM32F103_MCUCONF | |||
/* | |||
* STM32F103 drivers configuration. | |||
* The following settings override the default settings present in | |||
* the various device driver implementation headers. | |||
* Note that the settings for each driver only have effect if the whole | |||
* driver is enabled in halconf.h. | |||
* | |||
* IRQ priorities: | |||
* 15...0 Lowest...Highest. | |||
* | |||
* DMA priorities: | |||
* 0...3 Lowest...Highest. | |||
*/ | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
#define STM32_NO_INIT FALSE | |||
#define STM32_HSI_ENABLED TRUE | |||
#define STM32_LSI_ENABLED FALSE | |||
#define STM32_HSE_ENABLED TRUE | |||
#define STM32_LSE_ENABLED FALSE | |||
#define STM32_SW STM32_SW_PLL | |||
#define STM32_PLLSRC STM32_PLLSRC_HSE | |||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 | |||
#define STM32_PLLMUL_VALUE 9 | |||
#define STM32_HPRE STM32_HPRE_DIV1 | |||
#define STM32_PPRE1 STM32_PPRE1_DIV2 | |||
#define STM32_PPRE2 STM32_PPRE2_DIV2 | |||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 | |||
#define STM32_USB_CLOCK_REQUIRED TRUE | |||
#define STM32_USBPRE STM32_USBPRE_DIV1P5 | |||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK | |||
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV | |||
#define STM32_PVD_ENABLE FALSE | |||
#define STM32_PLS STM32_PLS_LEV0 | |||
/* | |||
* ADC driver system settings. | |||
*/ | |||
#define STM32_ADC_USE_ADC1 FALSE | |||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 | |||
#define STM32_ADC_ADC1_IRQ_PRIORITY 6 | |||
/* | |||
* CAN driver system settings. | |||
*/ | |||
#define STM32_CAN_USE_CAN1 FALSE | |||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11 | |||
/* | |||
* EXT driver system settings. | |||
*/ | |||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 | |||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 | |||
/* | |||
* GPT driver system settings. | |||
*/ | |||
#define STM32_GPT_USE_TIM1 FALSE | |||
#define STM32_GPT_USE_TIM2 FALSE | |||
#define STM32_GPT_USE_TIM3 FALSE | |||
#define STM32_GPT_USE_TIM4 FALSE | |||
#define STM32_GPT_USE_TIM5 FALSE | |||
#define STM32_GPT_USE_TIM8 FALSE | |||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7 | |||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* I2C driver system settings. | |||
*/ | |||
#define STM32_I2C_USE_I2C1 FALSE | |||
#define STM32_I2C_USE_I2C2 FALSE | |||
#define STM32_I2C_BUSY_TIMEOUT 50 | |||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 | |||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 | |||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 | |||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") | |||
/* | |||
* ICU driver system settings. | |||
*/ | |||
#define STM32_ICU_USE_TIM1 FALSE | |||
#define STM32_ICU_USE_TIM2 FALSE | |||
#define STM32_ICU_USE_TIM3 FALSE | |||
#define STM32_ICU_USE_TIM4 FALSE | |||
#define STM32_ICU_USE_TIM5 FALSE | |||
#define STM32_ICU_USE_TIM8 FALSE | |||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7 | |||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* PWM driver system settings. | |||
*/ | |||
#define STM32_PWM_USE_ADVANCED FALSE | |||
#define STM32_PWM_USE_TIM1 FALSE | |||
#define STM32_PWM_USE_TIM2 FALSE | |||
#define STM32_PWM_USE_TIM3 FALSE | |||
#define STM32_PWM_USE_TIM4 TRUE | |||
#define STM32_PWM_USE_TIM5 FALSE | |||
#define STM32_PWM_USE_TIM8 FALSE | |||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7 | |||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7 | |||
/* | |||
* RTC driver system settings. | |||
*/ | |||
#define STM32_RTC_IRQ_PRIORITY 15 | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define STM32_SERIAL_USE_USART1 FALSE | |||
#define STM32_SERIAL_USE_USART2 FALSE | |||
#define STM32_SERIAL_USE_USART3 FALSE | |||
#define STM32_SERIAL_USE_UART4 FALSE | |||
#define STM32_SERIAL_USE_UART5 FALSE | |||
#define STM32_SERIAL_USART1_PRIORITY 12 | |||
#define STM32_SERIAL_USART2_PRIORITY 12 | |||
#define STM32_SERIAL_USART3_PRIORITY 12 | |||
#define STM32_SERIAL_UART4_PRIORITY 12 | |||
#define STM32_SERIAL_UART5_PRIORITY 12 | |||
/* | |||
* SPI driver system settings. | |||
*/ | |||
#define STM32_SPI_USE_SPI1 FALSE | |||
#define STM32_SPI_USE_SPI2 FALSE | |||
#define STM32_SPI_USE_SPI3 FALSE | |||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 | |||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 | |||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 | |||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") | |||
/* | |||
* ST driver system settings. | |||
*/ | |||
#define STM32_ST_IRQ_PRIORITY 8 | |||
#define STM32_ST_USE_TIMER 2 | |||
/* | |||
* UART driver system settings. | |||
*/ | |||
#define STM32_UART_USE_USART1 FALSE | |||
#define STM32_UART_USE_USART2 FALSE | |||
#define STM32_UART_USE_USART3 FALSE | |||
#define STM32_UART_USART1_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART2_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART3_IRQ_PRIORITY 12 | |||
#define STM32_UART_USART1_DMA_PRIORITY 0 | |||
#define STM32_UART_USART2_DMA_PRIORITY 0 | |||
#define STM32_UART_USART3_DMA_PRIORITY 0 | |||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") | |||
/* | |||
* USB driver system settings. | |||
*/ | |||
#define STM32_USB_USE_USB1 TRUE | |||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE | |||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 | |||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 | |||
#endif /* _MCUCONF_H_ */ |
@ -0,0 +1,62 @@ | |||
# QMK-based firmware for Zenith Z-150 keyboard | |||
![Z-150](https://imgur.com/jayyyvJ.jpg) | |||
Zenith Z-150 keyboard conversion project: direct connection of Black Pill to the matrix. | |||
* Keyboard Maintainer: [DmNosachev](https://github.com/DmNosachev) | |||
* Hardware Supported: [Zenith Z-150 keyboard, 100-1860 version with white logo](https://deskthority.net/wiki/Zenith_Z-150), Black Pill STM32F103C8T6 MCU board. Alternatevely you can use any MCU which is supported by QMK and has 22 or more IO pins: Arduino Micro, Teensy 2.0, Teensy 2.0++, Blue Pill, etc. | |||
Earlier 100-1886 version with black logo has different PCB. | |||
Make example for this keyboard (after setting up your build environment): | |||
make handwired/z150:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
# Modding | |||
## Matrix | |||
Z-150 has 11x8 matrix. It's ghost-free thanks to the diodes. | |||
Columns are located under NEC D8049HC MCU IC: | |||
![Z-150 columns](https://imgur.com/XiOsrnh.jpg) | |||
Rows are connected to unmarked 24-pin MUX IC: | |||
![Z-150 rows](https://imgur.com/Wu8rHY0.jpg) | |||
## LEDs | |||
LEDs (from left to right): NumLock, CapsLock, ScrollLock: | |||
![Z-150 LED cathodes](https://imgur.com/MO5NLlZ.jpg) | |||
Their anodes are connected to VCC through 220Ω resistors. | |||
![Z-150 LED anodes](https://imgur.com/w1MfjRN.jpg) | |||
You can keep the original resistors, but with Black Pill or any other 3.3V controller the LEDs may seem a little dim. Try 150Ω or close value if you want to fix that. | |||
## Black Pill | |||
Suggested mount position for the Black Pill (view from the bottom side of the PCB): | |||
``` | |||
R0 R1 R2 R3 R4 R6 R9 LC LN LS | |||
,--------------------------------------------------------------------, | |||
|B12 B13 B14 B15 A8 A9 A10 A11 A12 A15 B3 B4 B5 B6 B7 3V3 GND |---, | |||
| |USB| | |||
|B11 B10 B1 B0 A7 A6 A5 A4 A3 A2 A1 A0 RST C13 B9 B8 GND |---' | |||
'--------------------------------------------------------------------' | |||
C0 C1 C2 C3 C4 C5 C6 C7 R5 R8 R7 RA | |||
``` | |||
1. Desolder all ICs, crystal oscillator, capacitors and resistors except R0–R2 (they connect LEDs to VCC). | |||
1. Solder 12-pin header to the Black Pill (pins B11–A0 on the left side). | |||
2. Solder two 3-pin headers for boot jumpers. | |||
3. Solder 4-pin SWD header. | |||
4. Burn [STM32duino bootloader](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/blob/master/bootloader_only_binaries/generic_boot20_pb12.bin) to Black Pill. | |||
5. Compile and flash the firmware: `make handwired/z150:default:flash` | |||
5. Align Black Pill pins B11–A4 with columns 0–7 and solder them. | |||
6. Connect rows, LEDs, ground and VCC traces to the corresponding pins of the BlackPill using additional wires. |
@ -0,0 +1,30 @@ | |||
MCU = STM32F103 | |||
# GENERIC STM32F103C8T6 board - stm32duino bootloader | |||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000 | |||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader | |||
BOARD = STM32_F103_STM32DUINO | |||
STM32_BOOTLOADER_ADDRESS = 0x80000000 | |||
DFU_ARGS = -d 1eaf:0003 -a2 -R | |||
DFU_SUFFIX_ARGS = -v 1eaf -p 0003 | |||
# Enter lower-power sleep mode when on the ChibiOS idle thread | |||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output |
@ -0,0 +1,39 @@ | |||
/* Copyright 2020 DmNosachev | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "z150.h" | |||
void matrix_init_kb(void) { | |||
setPinOutput(NUM_LOCK_LED_PIN); | |||
setPinOutput(CAPS_LOCK_LED_PIN); | |||
setPinOutput(SCROLL_LOCK_LED_PIN); | |||
writePinLow(NUM_LOCK_LED_PIN); | |||
writePinLow(CAPS_LOCK_LED_PIN); | |||
writePinLow(SCROLL_LOCK_LED_PIN); | |||
matrix_init_user(); | |||
} | |||
bool led_update_kb(led_t led_state) { | |||
bool res = led_update_user(led_state); | |||
if(res) { | |||
writePin(NUM_LOCK_LED_PIN, !led_state.num_lock); | |||
writePin(CAPS_LOCK_LED_PIN, !led_state.caps_lock); | |||
writePin(SCROLL_LOCK_LED_PIN, !led_state.scroll_lock); | |||
} | |||
return res; | |||
} |
@ -0,0 +1,54 @@ | |||
/* Copyright 2020 DmNosachev | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* readability */ | |||
#define XXX KC_NO | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
K35, K34, KA7, KA6, KA5, KA4, KA3, KA2, KA1, KA0, K97, K96, K95, K94, K93, K92, K57, K23, K22, \ | |||
K33, K32, K91, K90, K87, K86, K85, K84, K83, K82, K81, K80, K77, K76, K75, K21, K20, K17, K16, \ | |||
K31, K30, K73, K72, K71, K70, K67, K66, K65, K64, K63, K62, K61, K60, K74, K15, K14, K13, K12, \ | |||
K26, K27, K56, K54, K53, K52, K51, K50, K47, K46, K45, K44, K43, K42, K41, K11, K10, K07, K04, \ | |||
K24, K25, K40, K55, K37, K36, K06, K05 \ | |||
) \ | |||
{ \ | |||
/* 0 */ { XXX, XXX, XXX, XXX, K04, K05, K06, K07 }, \ | |||
/* 1 */ { K10, K11, K12, K13, K14, K15, K16, K17 }, \ | |||
/* 2 */ { K20, K21, K22, K23, K24, K25, K26, K27 }, \ | |||
/* 3 */ { K30, K31, K32, K33, K34, K35, K36, K37 }, \ | |||
/* 4 */ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||
/* 5 */ { K50, K51, K52, K53, K54, K55, K56, K57 }, \ | |||
/* 6 */ { K60, K61, K62, K63, K64, K65, K66, K67 }, \ | |||
/* 7 */ { K70, K71, K72, K73, K74, K75, K76, K77 }, \ | |||
/* 8 */ { K80, K81, K82, K83, K84, K85, K86, K87 }, \ | |||
/* 9 */ { K90, K91, K92, K93, K94, K95, K96, K97 }, \ | |||
/* A */ { KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7 } \ | |||
} | |||
/* 0 1 2 3 4 5 6 7 */ | |||