@ -0,0 +1,25 @@ | |||||
# Krush60 | |||||
A 60% keyboard sold in several variants. | |||||
1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko. | |||||
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. | |||||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) | |||||
* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case | |||||
* Hardware Availability: [Mechkey.store](https://mechkey.store/) | |||||
Make examples for this keyboard (after setting up your build environment): | |||||
make sawnsprojects/krush/krush60/solder:default | |||||
## Bootloader | |||||
Enter the bootloader in 3 ways: | |||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | |||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead | |||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,60 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x5350 | |||||
#define PRODUCT_ID 0x6B32 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER SawnsProjects | |||||
#define PRODUCT Krush60 - Solder | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
/* key matrix pins */ | |||||
#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } | |||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } | |||||
#define UNUSED_PINS | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* Caps Lock */ | |||||
#define LED_CAPS_LOCK_PIN F0 | |||||
#define RGB_DI_PIN F1 | |||||
#ifdef RGB_DI_PIN | |||||
#define RGBLED_NUM 20 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ | |||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||||
/*== all animations enable ==*/ | |||||
#define RGBLIGHT_EFFECT_BREATHING | |||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||||
#define RGBLIGHT_EFFECT_SNAKE | |||||
#define RGBLIGHT_EFFECT_KNIGHT | |||||
#define RGBLIGHT_EFFECT_CHRISTMAS | |||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||||
#define RGBLIGHT_EFFECT_RGB_TEST | |||||
#define RGBLIGHT_EFFECT_ALTERNATING | |||||
#define RGBLIGHT_EFFECT_TWINKLE | |||||
#endif |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_all( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder full layout |
@ -0,0 +1,37 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_7u_spc( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL | |||||
) | |||||
[1] = LAYOUT_60_ansi_7u_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi 7U |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_arrow( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
) | |||||
[1] = LAYOUT_60_ansi_arrow( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi arrow |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_arrow_7u_spc( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
) | |||||
[1] = LAYOUT_60_ansi_arrow_7u_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi 7U arrow |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_arrow_split_bs( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
) | |||||
[1] = LAYOUT_60_ansi_arrow_split_bs( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi arrow split backspace |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_arrow_split_bs_7u_spc( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
) | |||||
[1] = LAYOUT_60_ansi_arrow_split_bs_7u_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi arrow, 7u spacebar & split backspace |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_arrow_split_bs_spc( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
) | |||||
[1] = LAYOUT_60_ansi_arrow_split_bs_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi arrow, split spacebar & split backspace |
@ -0,0 +1,37 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_arrow_split_spc( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
) | |||||
[1] = LAYOUT_60_ansi_arrow_split_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout ansi arrow & split spacebar |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_split_bs( | |||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), | |||||
[0] = LAYOUT_60_ansi_split_bs( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout split backspace |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_split_bs_7u_spc( | |||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL), | |||||
[0] = LAYOUT_60_ansi_split_bs_7u_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout 7u spacebar & split backspace |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_split_bs_spc( | |||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), | |||||
[1] = LAYOUT_60_ansi_split_bs_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout split spacebar & split backspace |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_split_spc( | |||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), | |||||
[1] = LAYOUT_60_ansi_split_spc( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder layout split backspace |
@ -0,0 +1,36 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_tsangan( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL | |||||
) | |||||
[1] = LAYOUT_60_ansi_tsangan( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder Tsangan |
@ -0,0 +1,35 @@ | |||||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_60_ansi_tsangan_split_bs( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL | |||||
) | |||||
[1] = LAYOUT_60_ansi_tsangan_split_bs( | |||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, | |||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush60 solder Tsangan & split backspace |
@ -0,0 +1,40 @@ | |||||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
/* | |||||
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ | |||||
* │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ | |||||
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ | |||||
* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ | |||||
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ | |||||
* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ | |||||
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ | |||||
* │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ | |||||
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ | |||||
* │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ | |||||
* └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ | |||||
*/ | |||||
[0] = LAYOUT_60_ansi( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap default for krush60 |
@ -0,0 +1,49 @@ | |||||
/* Copyright 2021 REPLACE_WITH_YOUR_NAME | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_SLSH, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(0), KC_LEFT, KC_LALT, KC_LCTL | |||||
), | |||||
[1] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
[2] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
[3] = LAYOUT_all( | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap VIA for krush60 |
@ -0,0 +1 @@ | |||||
VIA_ENABLE = yes |
@ -0,0 +1,15 @@ | |||||
# Krush60 solder | |||||
![Krush60](https://cdn.discordapp.com/attachments/898507964942536715/906171092916391956/252763374_2899749087003964_8763371038132517512_n.png) | |||||
A 60% keyboard PCB made and sold by SawnsProjects with Nuxros in [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674). | |||||
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) | |||||
* Hardware Supported: 60% keyboard case | |||||
* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make sawnsprojects/krush60/solder:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,22 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Bootloader selection | |||||
BOOTLOADER = atmel-dfu | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = yes # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||||
LAYOUTS = 60_ansi 60_ansi_arrow 60_ansi_arrow_split_bs_7u_spc |
@ -0,0 +1,17 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "solder.h" |
@ -0,0 +1,335 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#define XXX KC_NO | |||||
//x | |||||
#define LAYOUT_all( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, \ | |||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi | |||||
//x | |||||
#define LAYOUT_60_ansi( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K92, K94, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_iso | |||||
//x | |||||
#define LAYOUT_60_iso(\ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K92, K94, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_split_bs | |||||
#define LAYOUT_60_ansi_split_bs( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K92, K94, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_split_spc | |||||
#define LAYOUT_60_ansi_split_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_split_bs_spc | |||||
#define LAYOUT_60_ansi_split_bs_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_7u_spc | |||||
#define LAYOUT_60_ansi_7u_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K92, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_split_7u_spc | |||||
#define LAYOUT_60_ansi_split_bs_7u_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ | |||||
K80, K90, K81, K92, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_arrow_split_bs | |||||
#define LAYOUT_60_ansi_arrow_split_bs( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ | |||||
K80, K90, K81, K92, K94, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_arrow_split_spc | |||||
#define LAYOUT_60_ansi_arrow_split_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ | |||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_arrow_split_bs_spc | |||||
#define LAYOUT_60_ansi_arrow_split_bs_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ | |||||
K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, K82, XXX, K84, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_arrow_7u_spc | |||||
#define LAYOUT_60_ansi_arrow_7u_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ | |||||
K80, K90, K81, K92, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_arrow | |||||
//x | |||||
#define LAYOUT_60_ansi_arrow( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ | |||||
K80, K90, K81, K92, K94, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ | |||||
} | |||||
//x | |||||
//LAYOUT_60_ansi_arrow_split_bs_7u_spc | |||||
#define LAYOUT_60_ansi_arrow_split_bs_7u_spc( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ | |||||
K80, K90, K81, K92, K85, K86, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, xxx, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, K75, XXX, K77 }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ | |||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_tsangan | |||||
#define LAYOUT_60_ansi_tsangan( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ | |||||
K80, K90, K81, K92, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, xxx }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_ansi_tsangan_split_bs | |||||
#define LAYOUT_60_ansi_tsangan_split_bs( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ | |||||
K80, K90, K81, K92, K85, K95, K97 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, XXX }, \ | |||||
{ K10, K11, K12, K13, K14, K15, XXX, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, XXX }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, XXX }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, XXX, XXX }, \ | |||||
{ K60, K61, K62, K63, K64, K65, K66, XXX }, \ | |||||
{ K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ | |||||
{ K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ | |||||
{ K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ | |||||
} | |||||
//LAYOUT_60_iso_tsangan | |||||
#define LAYOUT_60_iso_tsangan LAYOUT_60_ansi_tsangan | |||||
//LAYOUT_60_iso_tsangan_split_bs | |||||
#define LAYOUT_60_iso_tsangan_split_bs LAYOUT_60_ansi_tsangan_split_bs | |||||
@ -0,0 +1,25 @@ | |||||
# Krush65 | |||||
A 65% keyboard sold in several variants. | |||||
1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case. | |||||
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. | |||||
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) | |||||
* Hardware Supported: Krush65 | |||||
* Hardware Availability: [Mechkey.store](https://mechkey.store/) | |||||
Make examples for this keyboard (after setting up your build environment): | |||||
make sawnsprojects/krush/krush65/solder:default | |||||
## Bootloader | |||||
Enter the bootloader in 3 ways: | |||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | |||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead | |||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,68 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0x5350 | |||||
#define PRODUCT_ID 0x6B31 | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER SawnsProjects | |||||
#define PRODUCT Krush65 - Solder | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
/* key matrix pins */ | |||||
#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } | |||||
#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } | |||||
#define UNUSED_PINS | |||||
/* indicator */ | |||||
// #define LED_CAPS_LOCK_PIN F0 | |||||
/* COL2ROW or ROW2COL */ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* Caps Lock */ | |||||
#define LED_CAPS_LOCK_PIN F0 | |||||
/* rotary */ | |||||
#define ENCODERS_PAD_A { D0 } | |||||
#define ENCODERS_PAD_B { B3 } | |||||
#define ENCODER_RESOLUTION 4 | |||||
#define RGB_DI_PIN F1 | |||||
#ifdef RGB_DI_PIN | |||||
#define RGBLED_NUM 20 | |||||
#define RGBLIGHT_HUE_STEP 8 | |||||
#define RGBLIGHT_SAT_STEP 8 | |||||
#define RGBLIGHT_VAL_STEP 8 | |||||
#define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ | |||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||||
/*== all animations enable ==*/ | |||||
#define RGBLIGHT_EFFECT_BREATHING | |||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||||
#define RGBLIGHT_EFFECT_SNAKE | |||||
#define RGBLIGHT_EFFECT_KNIGHT | |||||
#define RGBLIGHT_EFFECT_CHRISTMAS | |||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||||
#define RGBLIGHT_EFFECT_RGB_TEST | |||||
#define RGBLIGHT_EFFECT_ALTERNATING | |||||
#define RGBLIGHT_EFFECT_TWINKLE | |||||
#endif |
@ -0,0 +1,58 @@ | |||||
/* Copyright 2020 Neil Brian Ramirez | |||||
* Copyright 2021 drashna jael're (@drashna) | |||||
* Copyright 2021 uybv | |||||
* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 3 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "encoder_actions.h" | |||||
#ifdef ENCODER_ENABLE | |||||
# ifdef ENCODERS | |||||
static uint8_t encoder_state[ENCODERS] = {0}; | |||||
static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; | |||||
static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; | |||||
# endif | |||||
void encoder_action_unregister(void) { | |||||
# ifdef ENCODERS | |||||
for (int index = 0; index < ENCODERS; ++index) { | |||||
if (encoder_state[index]) { | |||||
keyevent_t encoder_event = (keyevent_t) { | |||||
.key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], | |||||
.pressed = false, | |||||
.time = (timer_read() | 1) | |||||
}; | |||||
encoder_state[index] = 0; | |||||
action_exec(encoder_event); | |||||
} | |||||
} | |||||
# endif | |||||
} | |||||
void encoder_action_register(uint8_t index, bool clockwise) { | |||||
# ifdef ENCODERS | |||||
keyevent_t encoder_event = (keyevent_t) { | |||||
.key = clockwise ? encoder_cw[index] : encoder_ccw[index], | |||||
.pressed = true, | |||||
.time = (timer_read() | 1) | |||||
}; | |||||
encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); | |||||
action_exec(encoder_event); | |||||
# endif | |||||
} | |||||
#endif |
@ -0,0 +1,21 @@ | |||||
/* Copyright 2020 Neil Brian Ramirez | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 3 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "quantum.h" | |||||
void encoder_action_unregister(void); | |||||
void encoder_action_register(uint8_t index, bool clockwise); |
@ -0,0 +1,299 @@ | |||||
{ | |||||
"keyboard_name": "Krush65 Solder", | |||||
"url": "", | |||||
"maintainer": "MaiTheSan", | |||||
"layouts": { | |||||
"LAYOUT_all": { | |||||
"layout": [ | |||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 }, | |||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 }, | |||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 }, | |||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 }, | |||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 }, | |||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 }, | |||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 }, | |||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 }, | |||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 }, | |||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 }, | |||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 }, | |||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 }, | |||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 }, | |||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0 }, | |||||
{ "label": "K17 (B2,D3)", "x": 14, "y": 0 }, | |||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 }, | |||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, | |||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, | |||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, | |||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, | |||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, | |||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, | |||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, | |||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, | |||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, | |||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, | |||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, | |||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, | |||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, | |||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, | |||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 }, | |||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, | |||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, | |||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, | |||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, | |||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, | |||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, | |||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, | |||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, | |||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, | |||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, | |||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, | |||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, | |||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, | |||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 }, | |||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, | |||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, | |||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, | |||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, | |||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, | |||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, | |||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, | |||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, | |||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, | |||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, | |||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, | |||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, | |||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 }, | |||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 }, | |||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, | |||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, | |||||
{ "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 }, | |||||
{ "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 }, | |||||
{ "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 }, | |||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, | |||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 }, | |||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 }, | |||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 } | |||||
] | |||||
}, | |||||
"LAYOUT_65_ansi_blocker_split_bs_sp": { | |||||
"layout": [ | |||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 }, | |||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 }, | |||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 }, | |||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 }, | |||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 }, | |||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 }, | |||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 }, | |||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 }, | |||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 }, | |||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 }, | |||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 }, | |||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 }, | |||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 }, | |||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0 }, | |||||
{ "label": "K17 (B2,D3)", "x": 14, "y": 0 }, | |||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 }, | |||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, | |||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, | |||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, | |||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, | |||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, | |||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, | |||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, | |||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, | |||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, | |||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, | |||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, | |||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, | |||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, | |||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, | |||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 }, | |||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, | |||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, | |||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, | |||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, | |||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, | |||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, | |||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, | |||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, | |||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, | |||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, | |||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, | |||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, | |||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, | |||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 }, | |||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, | |||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, | |||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, | |||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, | |||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, | |||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, | |||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, | |||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, | |||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, | |||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, | |||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, | |||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, | |||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 }, | |||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 }, | |||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, | |||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, | |||||
{ "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 }, | |||||
{ "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 }, | |||||
{ "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 }, | |||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, | |||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 }, | |||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 }, | |||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 } | |||||
] | |||||
}, | |||||
"LAYOUT_65_ansi_blocker": { | |||||
"layout": [ | |||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 }, | |||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 }, | |||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 }, | |||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 }, | |||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 }, | |||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 }, | |||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 }, | |||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 }, | |||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 }, | |||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 }, | |||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 }, | |||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 }, | |||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 }, | |||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0, "w": 2 }, | |||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 }, | |||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, | |||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, | |||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, | |||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, | |||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, | |||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, | |||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, | |||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, | |||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, | |||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, | |||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, | |||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, | |||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, | |||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, | |||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 }, | |||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, | |||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, | |||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, | |||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, | |||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, | |||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, | |||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, | |||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, | |||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, | |||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, | |||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, | |||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, | |||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, | |||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 }, | |||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, | |||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, | |||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, | |||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, | |||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, | |||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, | |||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, | |||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, | |||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, | |||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, | |||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, | |||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, | |||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 }, | |||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 }, | |||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, | |||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, | |||||
{ "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 }, | |||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, | |||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 }, | |||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 }, | |||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 } | |||||
] | |||||
}, | |||||
"LAYOUT_65_ansi_blocker_split_bs": { | |||||
"layout": [ | |||||
{ "label": "K00 (B1,C7)", "x": 0, "y": 0 }, | |||||
{ "label": "K10 (B2,C7)", "x": 1, "y": 0 }, | |||||
{ "label": "K01 (B1,C6)", "x": 2, "y": 0 }, | |||||
{ "label": "K11 (B2,C6)", "x": 3, "y": 0 }, | |||||
{ "label": "K02 (B1,B6)", "x": 4, "y": 0 }, | |||||
{ "label": "K12 (B2,B6)", "x": 5, "y": 0 }, | |||||
{ "label": "K03 (B1,B5)", "x": 6, "y": 0 }, | |||||
{ "label": "K13 (B2,B5)", "x": 7, "y": 0 }, | |||||
{ "label": "K04 (B1,B4)", "x": 8, "y": 0 }, | |||||
{ "label": "K14 (B2,B4)", "x": 9, "y": 0 }, | |||||
{ "label": "K05 (B1,D7)", "x": 10, "y": 0 }, | |||||
{ "label": "K15 (B2,D7)", "x": 11, "y": 0 }, | |||||
{ "label": "K06 (B1,D5)", "x": 12, "y": 0 }, | |||||
{ "label": "K26 (D1,D5)", "x": 13, "y": 0 }, | |||||
{ "label": "K17 (B2,D3)", "x": 14, "y": 0 }, | |||||
{ "label": "K07 (B1,D3)", "x": 15, "y": 0 }, | |||||
{ "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, | |||||
{ "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, | |||||
{ "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, | |||||
{ "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, | |||||
{ "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, | |||||
{ "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, | |||||
{ "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, | |||||
{ "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, | |||||
{ "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, | |||||
{ "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, | |||||
{ "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, | |||||
{ "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, | |||||
{ "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, | |||||
{ "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, | |||||
{ "label": "K37 (D2,D3)", "x": 15, "y": 1 }, | |||||
{ "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, | |||||
{ "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, | |||||
{ "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, | |||||
{ "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, | |||||
{ "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, | |||||
{ "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, | |||||
{ "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, | |||||
{ "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, | |||||
{ "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, | |||||
{ "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, | |||||
{ "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, | |||||
{ "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, | |||||
{ "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, | |||||
{ "label": "K57 (D6,D3)", "x": 15, "y": 2 }, | |||||
{ "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, | |||||
{ "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, | |||||
{ "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, | |||||
{ "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, | |||||
{ "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, | |||||
{ "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, | |||||
{ "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, | |||||
{ "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, | |||||
{ "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, | |||||
{ "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, | |||||
{ "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, | |||||
{ "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, | |||||
{ "label": "K77 (F7,D3)", "x": 14, "y": 3 }, | |||||
{ "label": "K67 (F6,D3)", "x": 15, "y": 3 }, | |||||
{ "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, | |||||
{ "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, | |||||
{ "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 }, | |||||
{ "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, | |||||
{ "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, | |||||
{ "label": "K95 (F4,D7)", "x": 13, "y": 4 }, | |||||
{ "label": "K97 (F4,D3)", "x": 14, "y": 4 }, | |||||
{ "label": "K87 (F5,D3)", "x": 15, "y": 4 } | |||||
] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,39 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_65_ansi_blocker( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SPC, KC_UP, KC_PGDN, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_65_ansi_blocker( | |||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The keymap for krush65 solder layout ansi blocker |
@ -0,0 +1,38 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_65_ansi_blocker_split_bs_sp( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_65_ansi_blocker_split_bs_sp( | |||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush65 solder layout ansi blocker with split backspace and split spacebar |
@ -0,0 +1,39 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_65_ansi_blocker_split_bs( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_65_ansi_blocker_split_bs( | |||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
# The keymap for krush65 solder layout ansi blocker with split backspace |
@ -0,0 +1,39 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_all( | |||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; | |||||
@ -0,0 +1 @@ | |||||
# The default keymap for krush65 solder |
@ -0,0 +1,75 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_all( | |||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
[2] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
[3] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; | |||||
bool encoder_update_user(uint8_t index, bool clockwise) { | |||||
if (index == 0) { | |||||
switch (get_highest_layer(layer_state)) { | |||||
case 0: | |||||
// main layer - move mouse right (CW) and left (CCW) | |||||
if (clockwise) { | |||||
tap_code_delay(KC_VOLU, 10); | |||||
} else { | |||||
tap_code_delay(KC_VOLD, 10); | |||||
} | |||||
break; | |||||
default: | |||||
// other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) | |||||
if (clockwise) { | |||||
tap_code16(C(KC_EQL)); | |||||
} else { | |||||
tap_code16(C(KC_MINS)); | |||||
} | |||||
break; | |||||
} | |||||
} | |||||
return false; | |||||
} |
@ -0,0 +1 @@ | |||||
#custom keymap for MikeTheSan |
@ -0,0 +1 @@ | |||||
VIA_ENABLE = yes |
@ -0,0 +1,51 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[0] = LAYOUT_all( | |||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||||
), | |||||
[1] = LAYOUT_all( | |||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
[2] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
[3] = LAYOUT_all( | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||||
), | |||||
}; |
@ -0,0 +1 @@ | |||||
# The VIA keymap for krush65 solder |
@ -0,0 +1 @@ | |||||
VIA_ENABLE = yes |
@ -0,0 +1,15 @@ | |||||
# Krush65 solder | |||||
![Krush65](https://cdn.shopify.com/s/files/1/0299/9497/5365/files/4_-_2BS9fH2_2048x2048.jpg) | |||||
A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). | |||||
* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) | |||||
* Hardware Supported: Krush65 | |||||
* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1410794482649627) | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make sawnsprojects/krush65/solder:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,23 @@ | |||||
# MCU name | |||||
MCU = atmega32u4 | |||||
# Bootloader selection | |||||
BOOTLOADER = atmel-dfu | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = yes # Console for debug | |||||
COMMAND_ENABLE = no # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow | |||||
ENCODER_ENABLE = yes | |||||
LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs |
@ -0,0 +1,53 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include "solder.h" | |||||
#include "encoder_actions.h" | |||||
/* Custom encoder control - handles CW/CCW turning of encoder | |||||
* Default behavior: | |||||
* main layer: | |||||
* CW: move mouse right | |||||
* CCW: move mouse left | |||||
* other layers: | |||||
* CW: = (equals/plus - increase slider in Adobe products) | |||||
* CCW: - (minus/underscore - decrease slider in adobe products) | |||||
*/ | |||||
bool encoder_update_kb(uint8_t index, bool clockwise) { | |||||
if (!encoder_update_user(index, clockwise)) { return false; } | |||||
if (index == 0) { | |||||
switch (get_highest_layer(layer_state)) { | |||||
case 0: | |||||
// main layer - move mouse right (CW) and left (CCW) | |||||
if (clockwise) { | |||||
tap_code_delay(KC_VOLU, 10); | |||||
} else { | |||||
tap_code_delay(KC_VOLD, 10); | |||||
} | |||||
break; | |||||
default: | |||||
// other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) | |||||
if (clockwise) { | |||||
tap_code16(C(KC_EQL)); | |||||
} else { | |||||
tap_code16(C(KC_MINS)); | |||||
} | |||||
break; | |||||
} | |||||
} | |||||
return true; | |||||
} |
@ -0,0 +1,93 @@ | |||||
/* Copyright 2021 SawnsProjects | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
#define LAYOUT_all( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ | |||||
K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \ | |||||
{ K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ | |||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ | |||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ | |||||
{ K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \ | |||||
{ K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \ | |||||
} | |||||
#define LAYOUT_65_ansi_blocker( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K07, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ | |||||
K80, K90, K81, K92, K94, K85, K95, K97, K87 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \ | |||||
{ K10, K11, K12, K13, K14, K15, KC_NO, KC_NO }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ | |||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ | |||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ | |||||
{ K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \ | |||||
{ K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \ | |||||
} | |||||
#define LAYOUT_65_ansi_blocker_split_bs( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ | |||||
K80, K90, K81, K92, K94, K85, K95, K97, K87 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \ | |||||
{ K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ | |||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ | |||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ | |||||
{ K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \ | |||||
{ K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \ | |||||
} | |||||
#define LAYOUT_65_ansi_blocker_split_bs_sp( \ | |||||
K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ | |||||
K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ | |||||
K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ | |||||
K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ | |||||
K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ | |||||
) { \ | |||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \ | |||||
{ K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ | |||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ | |||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \ | |||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \ | |||||
{ K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ | |||||
{ K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ | |||||
{ K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ | |||||
{ K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \ | |||||
{ K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \ | |||||
} | |||||