* tkl30 * Amended with collaborator suggestions * s/DEBOUNCING_DELAY/DEBOUNCE/ * Used noroadsleft's PID suggestion * Committed noroadsleft's keymap formatting and rules.mk suggestions * LAYOUT formatting and readme suggestionspull/8116/head
@ -0,0 +1,48 @@ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0B7F | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Worldspawn00 | |||
#define PRODUCT TKL30 | |||
#define DESCRIPTION A 3-row TKL-style keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 3 | |||
#define MATRIX_COLS 15 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { D2, B5, F4 } | |||
#define MATRIX_COL_PINS { D3, D1, D0, D4, F7, C6, B1, D7, B3, E6, B2, B4, B6, F6, E5 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* number of backlight levels */ | |||
#ifdef BACKLIGHT_PIN | |||
#define BACKLIGHT_LEVELS 1 | |||
#endif | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
#define RGB_DI_PIN B1 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 1 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif | |||
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "TKL30", | |||
"url": "https://qmk.fm/keyboards", | |||
"maintainer": "worldspawn00", | |||
"width": 18.25, | |||
"height": 3.25, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"label":"Tab", "x":0, "y":0.25, "w":1.5}, {"label":"Q", "x":1.5, "y":0.25}, {"label":"W", "x":2.5, "y":0.25}, {"label":"E", "x":3.5, "y":0.25}, {"label":"R", "x":4.5, "y":0.25}, {"label":"T", "x":5.5, "y":0.25}, {"label":"Y", "x":6.5, "y":0.25}, {"label":"U", "x":7.5, "y":0.25}, {"label":"I", "x":8.5, "y":0.25}, {"label":"O", "x":9.5, "y":0.25}, {"label":"P", "x":10.5, "y":0.25}, {"label":"{", "x":11.5, "y":0.25}, {"label":"}", "x":12.5, "y":0.25}, {"label":"|", "x":13.5, "y":0.25, "w":1.5}, {"label":"Ctrl", "x":0, "y":1.25, "w":1.75}, {"label":"A", "x":1.75, "y":1.25}, {"label":"S", "x":2.75, "y":1.25}, {"label":"D", "x":3.75, "y":1.25}, {"label":"F", "x":4.75, "y":1.25}, {"label":"G", "x":5.75, "y":1.25}, {"label":"H", "x":6.75, "y":1.25}, {"label":"J", "x":7.75, "y":1.25}, {"label":"K", "x":8.75, "y":1.25}, {"label":"L", "x":9.75, "y":1.25}, {"label":":", "x":10.75, "y":1.25}, {"label":"\"", "x":11.75, "y":1.25}, {"label":"Enter", "x":12.75, "y":1.25, "w":2.25}, {"label":"\u2191", "x":16.25, "y":1.25}, {"label":"Shift", "x":0, "y":2.25, "w":1.25}, {"label":"Alt", "x":1.25, "y":2.25}, {"label":"Z", "x":2.25, "y":2.25}, {"label":"X", "x":3.25, "y":2.25}, {"label":"C", "x":4.25, "y":2.25}, {"label":"V", "x":5.25, "y":2.25}, {"x":6.25, "y":2.25, "w":2}, {"label":"B", "x":8.25, "y":2.25}, {"label":"N", "x":9.25, "y":2.25}, {"label":"M", "x":10.25, "y":2.25}, {"label":"<", "x":11.25, "y":2.25}, {"label":">", "x":12.25, "y":2.25}, {"label":"Fn", "x":13.25, "y":2.25, "w":1.75}, {"label":"\u2190", "x":15.25, "y":2.25}, {"label":"\u2193", "x":16.25, "y":2.25}, {"label":"\u2192", "x":17.25, "y":2.25}] | |||
} | |||
} | |||
} |
@ -0,0 +1,24 @@ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, | |||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_UP, | |||
KC_LSFT, KC_LALT, KC_Z, KC_X, KC_C, KC_V, LT(1,KC_SPC), KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MO(2), KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, | |||
KC_TRNS, KC_LGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, KC_HOME, KC_PGDN, KC_END | |||
), | |||
[2] = LAYOUT( | |||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS | |||
) | |||
}; | |||
@ -0,0 +1,16 @@ | |||
# TKL30 | |||
![TKL30](https://i.imgur.com/rnhOx87.png) | |||
The TKL30 is a three-row TKL-style board. | |||
* Keyboard Maintainer: [worldspawn00](https://github.com/worldspawn00/) | |||
* Hardware Supported: TKL30 PCB, Pro Micro | |||
* Hardware Availability: [PCB](https://github.com/worldspawn00/TKL30) | |||
Make example for this keyboard (after setting up your build environment): | |||
make wsk/tkl30:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
@ -0,0 +1,32 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# ATmega32A bootloadHID | |||
# ATmega328P USBasp | |||
BOOTLOADER = caterina | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs |
@ -0,0 +1 @@ | |||
#include "tkl30.h" |
@ -0,0 +1,14 @@ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT( \ | |||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ | |||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ | |||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K114, K214 \ | |||
) { \ | |||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ | |||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 } \ | |||
} | |||