* Added basic MxSS support * Fixed split RSHFT for ISO layouts * Updated readme.md for MxSS * Added initial support for individual control of front RGB LEDs * Changed RGBLED color selection to work using hue and saturation rather than RGB Added code for LED state change on layer change * Avoid needing an entire 8 bits to store the brightness value * Added custom keycodes, along with their handlers * Added EEPROM storage for front LED config * Fixed up ability to use QMK Configurator and updated readme.md * Applied suggested changes from pull request: https://github.com/standard/standard/issues/452 Updated name in license descriptions Updated layouts to snake case Corrected mistakes in info.json Updated layer_colors to a weak attributed array in mxss.c * Defined a new safe range for custom keycodes in keymap.cpull/3354/head
@ -0,0 +1,138 @@ | |||
/* | |||
Copyright 2018 Jumail Mundekkat / MxBlue | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER MxBlue | |||
#define PRODUCT MxSS | |||
#define DESCRIPTION Custom Polycarb Keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
/* matrix pin configuration */ | |||
#define MATRIX_ROW_PINS { F4, F1, F7, B1, B7 } | |||
#define MATRIX_COL_PINS { D7, D6, D4, D0, C6, B6, D1, B5, D2, B4, D3, D5, B0, B2, B3 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Basic RGB configuration */ | |||
#define RGB_DI_PIN C7 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 20 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP1 H | |||
//#define MAGIC_KEY_HELP2 SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0_ALT1 ESC | |||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER PAUSE | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
#endif |
@ -0,0 +1,45 @@ | |||
{ | |||
"keyboard_name": "MxSS", | |||
"maintainer": "qmk", | |||
"url": "https://geekhack.org/index.php?topic=94986.0", | |||
"height": 5, | |||
"width": 16, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_7u": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_splitspace": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_splitbs": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_splitbs_7u": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_splitbs_splitspace": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_iso": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_iso_7u": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_iso_splitspace": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_iso_splitbs": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_iso_splitbs_7u": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
}, | |||
"LAYOUT_ISO_splitbs_splitspace": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] | |||
} | |||
} | |||
} |
@ -0,0 +1,24 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_USER_H | |||
#define CONFIG_USER_H | |||
#include "config_common.h" | |||
// place overrides here | |||
#endif |
@ -0,0 +1,89 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Colors for layers | |||
// Format: {hue, saturation} | |||
// {0, 0} to turn off the LED | |||
// Add additional rows to handle more layers | |||
const hs_set layer_colors[] = { | |||
[0] = {0, 0}, // Color for Layer 0 | |||
[1] = {86, 255}, // Color for Layer 1 | |||
[2] = {36, 255}, // Color for Layer 2 | |||
[3] = {185, 255}, // Color for Layer 3 | |||
}; | |||
const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); | |||
// Use NEW_SAFE_RANGE to define new custom keycodes in order to not overwrite the ones used for front LED control | |||
enum custom_keycodes { | |||
MY_KEYCODE = NEW_SAFE_RANGE, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
LAYOUT( /* Base */ | |||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, | |||
KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
LAYOUT( /* L1 */ | |||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||
KC_TRNS, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PSCR, FLED_VAD, FLED_VAI, FLED_MOD, RGB_VAI, | |||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, RGB_MOD, RGB_SAI, RGB_TOG, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI | |||
), | |||
}; | |||
const uint16_t PROGMEM fn_actions[] = { | |||
}; | |||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) | |||
{ | |||
// MACRODOWN only works in this function | |||
switch(id) { | |||
case 0: | |||
if (record->event.pressed) { | |||
register_code(KC_RSFT); | |||
} else { | |||
unregister_code(KC_RSFT); | |||
} | |||
break; | |||
} | |||
return MACRO_NONE; | |||
}; | |||
void matrix_init_user(void) { | |||
} | |||
void matrix_scan_user(void) { | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
return true; | |||
} | |||
void led_set_user(uint8_t usb_led) { | |||
} |
@ -0,0 +1,209 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#include "tmk_core/common/eeprom.h" | |||
#include "tmk_core/common/action_layer.h" | |||
#include "rgblight.h" | |||
// Variables for controlling front LED application | |||
uint8_t fled_mode; // Mode for front LEDs | |||
uint8_t fled_val; // Brightness for front leds (0 - 255) | |||
LED_TYPE fleds[2]; // Front LED rgb values for indicator mode use | |||
// Predefined colors for layers | |||
// Format: {hue, saturation} | |||
// {0, 0} to turn off the LED | |||
// Add additional rows to handle more layers | |||
__attribute__ ((weak)) | |||
const hs_set layer_colors[] = { | |||
[0] = {0, 0}, // Color for Layer 0 | |||
[1] = {86, 255}, // Color for Layer 1 | |||
[2] = {36, 255}, // Color for Layer 2 | |||
[3] = {185, 255}, // Color for Layer 3 | |||
}; | |||
__attribute__ ((weak)) | |||
const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); | |||
void matrix_init_kb(void) { | |||
// If EEPROM config exists, load it | |||
if (eeprom_is_valid()) { | |||
fled_config fled_conf; | |||
fled_conf.raw = eeprom_read_byte(EEPROM_FRONTLED_ADDR); | |||
fled_mode = fled_conf.mode; | |||
fled_val = fled_conf.val * FLED_VAL_STEP; | |||
// Else, default config | |||
} else { | |||
fled_mode = FLED_RGB; | |||
fled_val = 10 * FLED_VAL_STEP; | |||
eeprom_update_conf(); // Store default config to EEPROM | |||
} | |||
// Set default values for leds | |||
setrgb(0, 0, 0, &fleds[0]); | |||
setrgb(0, 0, 0, &fleds[1]); | |||
// Handle lighting for indicator mode | |||
if (fled_mode == FLED_INDI) { | |||
// Enable capslock led if enabled on host | |||
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) | |||
sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]); | |||
// Determine and set colour of layer LED according to current layer | |||
// if hue = sat = 0, leave LED off | |||
uint8_t layer = biton32(layer_state); | |||
if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0)) | |||
sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]); | |||
} | |||
matrix_init_user(); | |||
} | |||
void matrix_scan_kb(void) { | |||
// put your looping keyboard code here | |||
// runs every cycle (a lot) | |||
matrix_scan_user(); | |||
} | |||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { | |||
// Handle custom keycodes for front LED operation | |||
switch (keycode) { | |||
case FLED_MOD: // Change between front LED operation modes (off, indicator, RGB) | |||
if (record->event.pressed) | |||
fled_mode_cycle(); | |||
break; | |||
case FLED_VAI: // Increase the brightness of the front LEDs by FLED_VAL_STEP | |||
if (record->event.pressed) | |||
fled_val_increase(); | |||
break; | |||
case FLED_VAD: // Decrease the brightness of the front LEDs by FLED_VAL_STEP | |||
if (record->event.pressed) | |||
fled_val_decrease(); | |||
break; | |||
default: | |||
break; // Process all other keycodes normally | |||
} | |||
return process_record_user(keycode, record); | |||
} | |||
void led_set_kb(uint8_t usb_led) { | |||
// Set indicator LED appropriately, whether it is used or not | |||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) { | |||
sethsv(FLED_CAPS_H, FLED_CAPS_S, fled_val, &fleds[0]); | |||
} else { | |||
setrgb(0, 0, 0, &fleds[0]); | |||
} | |||
led_set_user(usb_led); | |||
} | |||
uint32_t layer_state_set_kb(uint32_t state) { | |||
// Determine and set colour of layer LED according to current layer | |||
// if hue = sat = 0, leave LED off | |||
uint8_t layer = biton32(state); | |||
if (layer < lc_size && !(layer_colors[layer].hue == 0 && layer_colors[layer].hue == 0)) | |||
sethsv(layer_colors[layer].hue, layer_colors[layer].sat, fled_val, &fleds[1]); | |||
else | |||
setrgb(0, 0, 0, &fleds[1]); | |||
return state; | |||
} | |||
// EEPROM Management | |||
// Test if magic value is present at expected location | |||
bool eeprom_is_valid(void) | |||
{ | |||
return (eeprom_read_word(EEPROM_MAGIC_ADDR) == EEPROM_MAGIC); | |||
} | |||
// Set magic value at expected location | |||
void eeprom_set_valid(bool valid) | |||
{ | |||
eeprom_update_word(EEPROM_MAGIC_ADDR, valid ? EEPROM_MAGIC : 0xFFFF); | |||
} | |||
// Store current front led config in EEPROM | |||
void eeprom_update_conf(void) | |||
{ | |||
// Create storage struct and set values | |||
fled_config conf; | |||
conf.mode = fled_mode; | |||
// Small hack to ensure max value is stored correctly | |||
if (fled_val == 255) | |||
conf.val = 256 / FLED_VAL_STEP; | |||
else | |||
conf.val = fled_val / FLED_VAL_STEP; | |||
// Set magic value and store config | |||
eeprom_set_valid(true); | |||
eeprom_update_byte(EEPROM_FRONTLED_ADDR, conf.raw); | |||
} | |||
// Custom keycode functions | |||
void fled_mode_cycle(void) | |||
{ | |||
// FLED -> FLED_RGB -> FLED_INDI | |||
switch (fled_mode) { | |||
case FLED_OFF: | |||
fled_mode = FLED_RGB; | |||
break; | |||
case FLED_RGB: | |||
fled_mode = FLED_INDI; | |||
break; | |||
case FLED_INDI: | |||
fled_mode = FLED_OFF; | |||
break; | |||
} | |||
// Update stored config | |||
eeprom_update_conf(); | |||
} | |||
void fled_val_increase(void) | |||
{ | |||
// Increase val by FLED_VAL_STEP, handling the upper edge case | |||
if (fled_val + FLED_VAL_STEP > 255) | |||
fled_val = 255; | |||
else | |||
fled_val += FLED_VAL_STEP; | |||
// Update stored config | |||
eeprom_update_conf(); | |||
} | |||
void fled_val_decrease(void) | |||
{ | |||
// Decrease val by FLED_VAL_STEP, handling the lower edge case | |||
if (fled_val - FLED_VAL_STEP > 255) | |||
fled_val = 255; | |||
else | |||
fled_val -= FLED_VAL_STEP; | |||
// Update stored config | |||
eeprom_update_conf(); | |||
} |
@ -0,0 +1,207 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef MXSS_H | |||
#define MXSS_H | |||
#include "quantum.h" | |||
#include "mxss_frontled.h" | |||
// This a shortcut to help you visually see your layout. | |||
// The following is an example using the Planck MIT layout | |||
// The first section contains all of the arguments | |||
// The second converts the arguments into a two-dimensional array | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k10E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k10E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ANSI, normalBS, 7u | |||
#define LAYOUT_7u( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ANSI, normalBS, split space | |||
#define LAYOUT_splitspace( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ANSI, splitBS, 6.25u | |||
#define LAYOUT_splitbs( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ANSI, splitBS, 7u | |||
#define LAYOUT_splitbs_7u( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ANSI, normalBS, split space | |||
#define LAYOUT_splitbs_splitspace( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ | |||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ISO, normalBS, 6.25u | |||
#define LAYOUT_iso( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ISO, normalBS, 7u | |||
#define LAYOUT_iso_7u( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ISO, normalBS, split space | |||
#define LAYOUT_iso_splitspace( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ISO, splitBS, 6.25u | |||
#define LAYOUT_iso_splitbs( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ISO, splitBS, 7u | |||
#define LAYOUT_iso_splitbs_7u( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k46, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO, k4B, k4C, k4D, k4E }, \ | |||
} | |||
//ISO, splitBS, split space | |||
#define LAYOUT_iso_splitbs_splitspace( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ | |||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ | |||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \ | |||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ | |||
k40, k41, k42, k43, k46, k48, k4A, k4B, k4C, k4D, k4E \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ | |||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ | |||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ | |||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ | |||
{ k40, k41, k42, k43, KC_NO, KC_NO, k46, KC_NO, k48, KC_NO, k4A, k4B, k4C, k4D, k4E }, \ | |||
} | |||
#endif |
@ -0,0 +1,81 @@ | |||
/* Copyright 2018 Jumail Mundekkat / MxBlue | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
// EEPROM management code taken from Wilba6582 | |||
// https://github.com/Wilba6582/qmk_firmware/blob/zeal60/keyboards/zeal60/zeal_eeprom.h | |||
#ifndef MXSS_FRONTLED_H | |||
#define MXSS_FRONTLED_H | |||
#include "quantum_keycodes.h" | |||
// RGBLED index for front LEDs | |||
#define RGBLIGHT_FLED1 14 | |||
#define RGBLIGHT_FLED2 15 | |||
// Brightness increase step for front LEDs | |||
#define FLED_VAL_STEP 8 | |||
// QMK never uses more then 32bytes of EEPROM, so our region starts there | |||
// Magic value to verify the state of the EEPROM | |||
#define EEPROM_MAGIC 0xC3E7 | |||
#define EEPROM_MAGIC_ADDR ((void*)32) | |||
// Front LED settings | |||
#define EEPROM_FRONTLED_ADDR ((void*)34) | |||
// Modes for front LEDs | |||
#define FLED_OFF 0b00 | |||
#define FLED_INDI 0b01 | |||
#define FLED_RGB 0b10 | |||
#define FLED_UNDEF 0b11 | |||
// Hard-coded color for capslock indicator in FLED_INDI mode, H:0% S:100% = Red | |||
#define FLED_CAPS_H 0 | |||
#define FLED_CAPS_S 255 | |||
// Config storage format for EEPROM | |||
typedef union { | |||
uint8_t raw; | |||
struct { | |||
uint8_t mode :2; | |||
uint8_t val :6; | |||
}; | |||
} fled_config; | |||
// Structure to store hue and saturation values | |||
typedef struct _hs_set { | |||
uint16_t hue; | |||
uint8_t sat; | |||
} hs_set; | |||
// Custom keycodes for front LED control | |||
enum fled_keycodes { | |||
FLED_MOD = SAFE_RANGE, | |||
FLED_VAI, | |||
FLED_VAD, | |||
NEW_SAFE_RANGE // define a new safe range | |||
}; | |||
bool eeprom_is_valid(void); // Check if EEPROM has been set up | |||
void eeprom_set_valid(bool valid); // Change validity state of EEPROM | |||
void eeprom_update_conf(void); // Store current front LED config to EEPROM | |||
void fled_mode_cycle(void); // Cycle between the 3 modes for the front LEDs | |||
void fled_val_increase(void); // Increase the brightness of the front LEDs | |||
void fled_val_decrease(void); // Decrease the brightness of the front LEDs | |||
#endif //MXSS_FRONTLED_H |
@ -0,0 +1,54 @@ | |||
# MxSS - Polycarb 65% Kit for MX/SMK | |||
![MxSS - Polycarb 65% Kit for MX/SMK](https://i.imgur.com/WDTWcmU.jpg) | |||
### Information: | |||
- Case: Frosted Polycarbonate, CNC milled | |||
- Plate: Brass, mirror-finished and electroplated | |||
- Weight: Same as plate | |||
- PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish | |||
### Details: | |||
- 2.9 degrees angle on the case | |||
- Top mount plate | |||
- Center USB, Type-B Mini | |||
- MX and SMK (White and Orange) switch support | |||
- Holtite support | |||
- RGB underglow | |||
- 1.5kg with plate and weight | |||
Keyboard Maintainer: [MxBlue](https://github.com/mxblu) | |||
Hardware Supported: Custom PCB, ATMega32u4 | |||
Hardware Availability: https://geekhack.org/index.php?topic=94986.0 | |||
Make example for this keyboard (after setting up your build environment): | |||
make mxss:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. | |||
# Front LED Operation | |||
The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes. | |||
There are 3 modes of operation: | |||
- FLED_OFF - Front LEDs stay off | |||
- FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request) | |||
- FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer | |||
Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example). | |||
## Custom Keycodes | |||
- FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI) | |||
- FLED_VAI - Increase front LED brightness | |||
- FLED_VAD - Decrease front LED brightness | |||
# Further Notes | |||
As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example. |
@ -0,0 +1,804 @@ | |||
/* Copyright 2016-2017 Yang Liu | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include <math.h> | |||
#include <avr/eeprom.h> | |||
#include <avr/interrupt.h> | |||
#include <util/delay.h> | |||
#include "progmem.h" | |||
#include "timer.h" | |||
#include "rgblight.h" | |||
#include "debug.h" | |||
#include "led_tables.h" | |||
#include "mxss_frontled.h" | |||
#ifndef RGBLIGHT_LIMIT_VAL | |||
#define RGBLIGHT_LIMIT_VAL 255 | |||
#endif | |||
#define MIN(a,b) (((a)<(b))?(a):(b)) | |||
#define MAX(a,b) (((a)>(b))?(a):(b)) | |||
#define LED_PTRTOIND(ptr) ((uint32_t) (ptr - led)/sizeof(LED_TYPE)) | |||
void copyrgb(LED_TYPE *src, LED_TYPE *dst); | |||
__attribute__ ((weak)) | |||
const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5}; | |||
__attribute__ ((weak)) | |||
const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30}; | |||
__attribute__ ((weak)) | |||
const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20}; | |||
__attribute__ ((weak)) | |||
const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20}; | |||
__attribute__ ((weak)) | |||
const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31}; | |||
__attribute__ ((weak)) | |||
const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90}; | |||
__attribute__ ((weak)) | |||
const uint16_t RGBLED_RGBTEST_INTERVALS[] PROGMEM = {1024}; | |||
rgblight_config_t rgblight_config; | |||
LED_TYPE led[RGBLED_NUM]; | |||
bool rgblight_timer_enabled = false; | |||
extern uint8_t fled_mode; | |||
extern uint8_t fled_val; | |||
extern LED_TYPE fleds[2]; | |||
hs_set fled_hs[2]; | |||
void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { | |||
uint8_t r = 0, g = 0, b = 0, base, color; | |||
// if led is front leds, cache the hue and sat values | |||
if (led1 == &led[RGBLIGHT_FLED1]) { | |||
fled_hs[0].hue = hue; | |||
fled_hs[0].sat = sat; | |||
} else if (led1 == &led[RGBLIGHT_FLED2]) { | |||
fled_hs[1].hue = hue; | |||
fled_hs[1].sat = sat; | |||
} | |||
if (val > RGBLIGHT_LIMIT_VAL) { | |||
val=RGBLIGHT_LIMIT_VAL; // limit the val | |||
} | |||
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind. | |||
r = val; | |||
g = val; | |||
b = val; | |||
} else { | |||
base = ((255 - sat) * val) >> 8; | |||
color = (val - base) * (hue % 60) / 60; | |||
switch (hue / 60) { | |||
case 0: | |||
r = val; | |||
g = base + color; | |||
b = base; | |||
break; | |||
case 1: | |||
r = val - color; | |||
g = val; | |||
b = base; | |||
break; | |||
case 2: | |||
r = base; | |||
g = val; | |||
b = base + color; | |||
break; | |||
case 3: | |||
r = base; | |||
g = val - color; | |||
b = val; | |||
break; | |||
case 4: | |||
r = base + color; | |||
g = base; | |||
b = val; | |||
break; | |||
case 5: | |||
r = val; | |||
g = base; | |||
b = val - color; | |||
break; | |||
} | |||
} | |||
r = pgm_read_byte(&CIE1931_CURVE[r]); | |||
g = pgm_read_byte(&CIE1931_CURVE[g]); | |||
b = pgm_read_byte(&CIE1931_CURVE[b]); | |||
setrgb(r, g, b, led1); | |||
} | |||
void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { | |||
(*led1).r = r; | |||
(*led1).g = g; | |||
(*led1).b = b; | |||
} | |||
void copyrgb(LED_TYPE *src, LED_TYPE *dst) { | |||
(*dst).r = (*src).r; | |||
(*dst).g = (*src).g; | |||
(*dst).b = (*src).b; | |||
} | |||
uint32_t eeconfig_read_rgblight(void) { | |||
return eeprom_read_dword(EECONFIG_RGBLIGHT); | |||
} | |||
void eeconfig_update_rgblight(uint32_t val) { | |||
eeprom_update_dword(EECONFIG_RGBLIGHT, val); | |||
} | |||
void eeconfig_update_rgblight_default(void) { | |||
dprintf("eeconfig_update_rgblight_default\n"); | |||
rgblight_config.enable = 1; | |||
rgblight_config.mode = 1; | |||
rgblight_config.hue = 0; | |||
rgblight_config.sat = 255; | |||
rgblight_config.val = RGBLIGHT_LIMIT_VAL; | |||
rgblight_config.speed = 0; | |||
eeconfig_update_rgblight(rgblight_config.raw); | |||
} | |||
void eeconfig_debug_rgblight(void) { | |||
dprintf("rgblight_config eprom\n"); | |||
dprintf("rgblight_config.enable = %d\n", rgblight_config.enable); | |||
dprintf("rghlight_config.mode = %d\n", rgblight_config.mode); | |||
dprintf("rgblight_config.hue = %d\n", rgblight_config.hue); | |||
dprintf("rgblight_config.sat = %d\n", rgblight_config.sat); | |||
dprintf("rgblight_config.val = %d\n", rgblight_config.val); | |||
dprintf("rgblight_config.speed = %d\n", rgblight_config.speed); | |||
} | |||
void rgblight_init(void) { | |||
debug_enable = 1; // Debug ON! | |||
dprintf("rgblight_init called.\n"); | |||
dprintf("rgblight_init start!\n"); | |||
if (!eeconfig_is_enabled()) { | |||
dprintf("rgblight_init eeconfig is not enabled.\n"); | |||
eeconfig_init(); | |||
eeconfig_update_rgblight_default(); | |||
} | |||
rgblight_config.raw = eeconfig_read_rgblight(); | |||
if (!rgblight_config.mode) { | |||
dprintf("rgblight_init rgblight_config.mode = 0. Write default values to EEPROM.\n"); | |||
eeconfig_update_rgblight_default(); | |||
rgblight_config.raw = eeconfig_read_rgblight(); | |||
} | |||
eeconfig_debug_rgblight(); // display current eeprom values | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
rgblight_timer_init(); // setup the timer | |||
#endif | |||
if (rgblight_config.enable) { | |||
rgblight_mode_noeeprom(rgblight_config.mode); | |||
} | |||
} | |||
void rgblight_update_dword(uint32_t dword) { | |||
rgblight_config.raw = dword; | |||
eeconfig_update_rgblight(rgblight_config.raw); | |||
if (rgblight_config.enable) | |||
rgblight_mode(rgblight_config.mode); | |||
else { | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
rgblight_timer_disable(); | |||
#endif | |||
rgblight_set(); | |||
} | |||
} | |||
void rgblight_increase(void) { | |||
uint8_t mode = 0; | |||
if (rgblight_config.mode < RGBLIGHT_MODES) { | |||
mode = rgblight_config.mode + 1; | |||
} | |||
rgblight_mode(mode); | |||
} | |||
void rgblight_decrease(void) { | |||
uint8_t mode = 0; | |||
// Mode will never be < 1. If it ever is, eeprom needs to be initialized. | |||
if (rgblight_config.mode > 1) { | |||
mode = rgblight_config.mode - 1; | |||
} | |||
rgblight_mode(mode); | |||
} | |||
void rgblight_step(void) { | |||
uint8_t mode = 0; | |||
mode = rgblight_config.mode + 1; | |||
if (mode > RGBLIGHT_MODES) { | |||
mode = 1; | |||
} | |||
rgblight_mode(mode); | |||
} | |||
void rgblight_step_reverse(void) { | |||
uint8_t mode = 0; | |||
mode = rgblight_config.mode - 1; | |||
if (mode < 1) { | |||
mode = RGBLIGHT_MODES; | |||
} | |||
rgblight_mode(mode); | |||
} | |||
uint32_t rgblight_get_mode(void) { | |||
if (!rgblight_config.enable) { | |||
return false; | |||
} | |||
return rgblight_config.mode; | |||
} | |||
void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { | |||
if (!rgblight_config.enable) { | |||
return; | |||
} | |||
if (mode < 1) { | |||
rgblight_config.mode = 1; | |||
} else if (mode > RGBLIGHT_MODES) { | |||
rgblight_config.mode = RGBLIGHT_MODES; | |||
} else { | |||
rgblight_config.mode = mode; | |||
} | |||
if (write_to_eeprom) { | |||
eeconfig_update_rgblight(rgblight_config.raw); | |||
xprintf("rgblight mode [EEPROM]: %u\n", rgblight_config.mode); | |||
} else { | |||
xprintf("rgblight mode [NOEEPROM]: %u\n", rgblight_config.mode); | |||
} | |||
if (rgblight_config.mode == 1) { | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
rgblight_timer_disable(); | |||
#endif | |||
} else if ((rgblight_config.mode >= 2 && rgblight_config.mode <= 24) || | |||
rgblight_config.mode == 35 ) { | |||
// MODE 2-5, breathing | |||
// MODE 6-8, rainbow mood | |||
// MODE 9-14, rainbow swirl | |||
// MODE 15-20, snake | |||
// MODE 21-23, knight | |||
// MODE 24, xmas | |||
// MODE 35 RGB test | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
rgblight_timer_enable(); | |||
#endif | |||
} else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) { | |||
// MODE 25-34, static gradient | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
rgblight_timer_disable(); | |||
#endif | |||
} | |||
rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val); | |||
} | |||
void rgblight_mode(uint8_t mode) { | |||
rgblight_mode_eeprom_helper(mode, true); | |||
} | |||
void rgblight_mode_noeeprom(uint8_t mode) { | |||
rgblight_mode_eeprom_helper(mode, false); | |||
} | |||
void rgblight_toggle(void) { | |||
xprintf("rgblight toggle [EEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable); | |||
if (rgblight_config.enable) { | |||
rgblight_disable(); | |||
} | |||
else { | |||
rgblight_enable(); | |||
} | |||
} | |||
void rgblight_toggle_noeeprom(void) { | |||
xprintf("rgblight toggle [NOEEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable); | |||
if (rgblight_config.enable) { | |||
rgblight_disable_noeeprom(); | |||
} | |||
else { | |||
rgblight_enable_noeeprom(); | |||
} | |||
} | |||
void rgblight_enable(void) { | |||
rgblight_config.enable = 1; | |||
// No need to update EEPROM here. rgblight_mode() will do that, actually | |||
//eeconfig_update_rgblight(rgblight_config.raw); | |||
xprintf("rgblight enable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); | |||
rgblight_mode(rgblight_config.mode); | |||
} | |||
void rgblight_enable_noeeprom(void) { | |||
rgblight_config.enable = 1; | |||
xprintf("rgblight enable [NOEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); | |||
rgblight_mode_noeeprom(rgblight_config.mode); | |||
} | |||
void rgblight_disable(void) { | |||
rgblight_config.enable = 0; | |||
eeconfig_update_rgblight(rgblight_config.raw); | |||
xprintf("rgblight disable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
//rgblight_timer_disable(); | |||
#endif | |||
_delay_ms(50); | |||
rgblight_set(); | |||
} | |||
void rgblight_disable_noeeprom(void) { | |||
rgblight_config.enable = 0; | |||
xprintf("rgblight disable [noEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable); | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
rgblight_timer_disable(); | |||
#endif | |||
_delay_ms(50); | |||
rgblight_set(); | |||
} | |||
// Deals with the messy details of incrementing an integer | |||
uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) { | |||
int16_t new_value = value; | |||
new_value += step; | |||
return MIN( MAX( new_value, min ), max ); | |||
} | |||
uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) { | |||
int16_t new_value = value; | |||
new_value -= step; | |||
return MIN( MAX( new_value, min ), max ); | |||
} | |||
void rgblight_increase_hue(void) { | |||
uint16_t hue; | |||
hue = (rgblight_config.hue+RGBLIGHT_HUE_STEP) % 360; | |||
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val); | |||
} | |||
void rgblight_decrease_hue(void) { | |||
uint16_t hue; | |||
if (rgblight_config.hue-RGBLIGHT_HUE_STEP < 0) { | |||
hue = (rgblight_config.hue + 360 - RGBLIGHT_HUE_STEP) % 360; | |||
} else { | |||
hue = (rgblight_config.hue - RGBLIGHT_HUE_STEP) % 360; | |||
} | |||
rgblight_sethsv(hue, rgblight_config.sat, rgblight_config.val); | |||
} | |||
void rgblight_increase_sat(void) { | |||
uint8_t sat; | |||
if (rgblight_config.sat + RGBLIGHT_SAT_STEP > 255) { | |||
sat = 255; | |||
} else { | |||
sat = rgblight_config.sat + RGBLIGHT_SAT_STEP; | |||
} | |||
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val); | |||
} | |||
void rgblight_decrease_sat(void) { | |||
uint8_t sat; | |||
if (rgblight_config.sat - RGBLIGHT_SAT_STEP < 0) { | |||
sat = 0; | |||
} else { | |||
sat = rgblight_config.sat - RGBLIGHT_SAT_STEP; | |||
} | |||
rgblight_sethsv(rgblight_config.hue, sat, rgblight_config.val); | |||
} | |||
void rgblight_increase_val(void) { | |||
uint8_t val; | |||
if (rgblight_config.val + RGBLIGHT_VAL_STEP > RGBLIGHT_LIMIT_VAL) { | |||
val = RGBLIGHT_LIMIT_VAL; | |||
} else { | |||
val = rgblight_config.val + RGBLIGHT_VAL_STEP; | |||
} | |||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val); | |||
} | |||
void rgblight_decrease_val(void) { | |||
uint8_t val; | |||
if (rgblight_config.val - RGBLIGHT_VAL_STEP < 0) { | |||
val = 0; | |||
} else { | |||
val = rgblight_config.val - RGBLIGHT_VAL_STEP; | |||
} | |||
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val); | |||
} | |||
void rgblight_increase_speed(void) { | |||
rgblight_config.speed = increment( rgblight_config.speed, 1, 0, 3 ); | |||
eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this | |||
} | |||
void rgblight_decrease_speed(void) { | |||
rgblight_config.speed = decrement( rgblight_config.speed, 1, 0, 3 ); | |||
eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this | |||
} | |||
void rgblight_sethsv_noeeprom_old(uint16_t hue, uint8_t sat, uint8_t val) { | |||
if (rgblight_config.enable) { | |||
LED_TYPE tmp_led; | |||
sethsv(hue, sat, val, &tmp_led); | |||
// dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val); | |||
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b); | |||
} | |||
} | |||
void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) { | |||
if (rgblight_config.enable) { | |||
if (rgblight_config.mode == 1) { | |||
// same static color | |||
LED_TYPE tmp_led; | |||
sethsv(hue, sat, val, &tmp_led); | |||
rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b); | |||
} else { | |||
// all LEDs in same color | |||
if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { | |||
// breathing mode, ignore the change of val, use in memory value instead | |||
val = rgblight_config.val; | |||
} else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) { | |||
// rainbow mood and rainbow swirl, ignore the change of hue | |||
hue = rgblight_config.hue; | |||
} else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) { | |||
// static gradient | |||
uint16_t _hue; | |||
int8_t direction = ((rgblight_config.mode - 25) % 2) ? -1 : 1; | |||
uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[(rgblight_config.mode - 25) / 2]); | |||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||
_hue = (range / RGBLED_NUM * i * direction + hue + 360) % 360; | |||
dprintf("rgblight rainbow set hsv: %u,%u,%d,%u\n", i, _hue, direction, range); | |||
sethsv(_hue, sat, val, (LED_TYPE *)&led[i]); | |||
} | |||
rgblight_set(); | |||
} | |||
} | |||
rgblight_config.hue = hue; | |||
rgblight_config.sat = sat; | |||
rgblight_config.val = val; | |||
if (write_to_eeprom) { | |||
eeconfig_update_rgblight(rgblight_config.raw); | |||
xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val); | |||
} else { | |||
xprintf("rgblight set hsv [NOEEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val); | |||
} | |||
} | |||
} | |||
void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) { | |||
rgblight_sethsv_eeprom_helper(hue, sat, val, true); | |||
} | |||
void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { | |||
rgblight_sethsv_eeprom_helper(hue, sat, val, false); | |||
} | |||
uint16_t rgblight_get_hue(void) { | |||
return rgblight_config.hue; | |||
} | |||
uint8_t rgblight_get_sat(void) { | |||
return rgblight_config.sat; | |||
} | |||
uint8_t rgblight_get_val(void) { | |||
return rgblight_config.val; | |||
} | |||
void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { | |||
if (!rgblight_config.enable) { return; } | |||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||
led[i].r = r; | |||
led[i].g = g; | |||
led[i].b = b; | |||
} | |||
rgblight_set(); | |||
} | |||
void rgblight_setrgb_at(uint8_t r, uint8_t g, uint8_t b, uint8_t index) { | |||
if (!rgblight_config.enable || index >= RGBLED_NUM) { return; } | |||
led[index].r = r; | |||
led[index].g = g; | |||
led[index].b = b; | |||
rgblight_set(); | |||
} | |||
void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index) { | |||
if (!rgblight_config.enable) { return; } | |||
LED_TYPE tmp_led; | |||
sethsv(hue, sat, val, &tmp_led); | |||
rgblight_setrgb_at(tmp_led.r, tmp_led.g, tmp_led.b, index); | |||
} | |||
void rgblight_set(void) { | |||
if (!rgblight_config.enable) { | |||
for (uint8_t i = 0; i < RGBLED_NUM; i++) { | |||
if (i == RGBLIGHT_FLED1 && i == RGBLIGHT_FLED2) | |||
continue; | |||
led[i].r = 0; | |||
led[i].g = 0; | |||
led[i].b = 0; | |||
} | |||
} | |||
switch (fled_mode) { | |||
case FLED_OFF: | |||
setrgb(0, 0, 0, &led[RGBLIGHT_FLED1]); | |||
setrgb(0, 0, 0, &led[RGBLIGHT_FLED2]); | |||
break; | |||
case FLED_INDI: | |||
copyrgb(&fleds[0], &led[RGBLIGHT_FLED1]); | |||
copyrgb(&fleds[1], &led[RGBLIGHT_FLED2]); | |||
break; | |||
case FLED_RGB: | |||
sethsv(fled_hs[0].hue, fled_hs[0].sat, fled_val, &led[RGBLIGHT_FLED1]); | |||
sethsv(fled_hs[1].hue, fled_hs[1].sat, fled_val, &led[RGBLIGHT_FLED2]); | |||
break; | |||
default: | |||
break; | |||
} | |||
ws2812_setleds(led, RGBLED_NUM); | |||
} | |||
#ifdef RGBLIGHT_ANIMATIONS | |||
// Animation timer -- AVR Timer3 | |||
void rgblight_timer_init(void) { | |||
// static uint8_t rgblight_timer_is_init = 0; | |||
// if (rgblight_timer_is_init) { | |||
// return; | |||
// } | |||
// rgblight_timer_is_init = 1; | |||
// /* Timer 3 setup */ | |||
// TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP | |||
// | _BV(CS30); // Clock selelct: clk/1 | |||
// /* Set TOP value */ | |||
// uint8_t sreg = SREG; | |||
// cli(); | |||
// OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; | |||
// OCR3AL = RGBLED_TIMER_TOP & 0xff; | |||
// SREG = sreg; | |||
rgblight_timer_enabled = true; | |||
} | |||
void rgblight_timer_enable(void) { | |||
rgblight_timer_enabled = true; | |||
dprintf("TIMER3 enabled.\n"); | |||
} | |||
void rgblight_timer_disable(void) { | |||
rgblight_timer_enabled = false; | |||
dprintf("TIMER3 disabled.\n"); | |||
} | |||
void rgblight_timer_toggle(void) { | |||
rgblight_timer_enabled ^= rgblight_timer_enabled; | |||
dprintf("TIMER3 toggled.\n"); | |||
} | |||
void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { | |||
rgblight_enable(); | |||
rgblight_mode(1); | |||
rgblight_setrgb(r, g, b); | |||
} | |||
void rgblight_task(void) { | |||
if (rgblight_timer_enabled) { | |||
// mode = 1, static light, do nothing here | |||
if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { | |||
// mode = 2 to 5, breathing mode | |||
rgblight_effect_breathing(rgblight_config.mode - 2); | |||
} else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { | |||
// mode = 6 to 8, rainbow mood mod | |||
rgblight_effect_rainbow_mood(rgblight_config.mode - 6); | |||
} else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { | |||
// mode = 9 to 14, rainbow swirl mode | |||
rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); | |||
} else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { | |||
// mode = 15 to 20, snake mode | |||
rgblight_effect_snake(rgblight_config.mode - 15); | |||
} else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { | |||
// mode = 21 to 23, knight mode | |||
rgblight_effect_knight(rgblight_config.mode - 21); | |||
} else if (rgblight_config.mode == 24) { | |||
// mode = 24, christmas mode | |||
rgblight_effect_christmas(); | |||
} else if (rgblight_config.mode == 35) { | |||
// mode = 35, RGB test | |||
rgblight_effect_rgbtest(); | |||
} | |||
} | |||
} | |||
// Effects | |||
void rgblight_effect_breathing(uint8_t interval) { | |||
static uint8_t pos = 0; | |||
static uint16_t last_timer = 0; | |||
float val; | |||
if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) { | |||
return; | |||
} | |||
last_timer = timer_read(); | |||
// http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/ | |||
val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E)); | |||
rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val); | |||
pos = (pos + 1) % 256; | |||
} | |||
void rgblight_effect_rainbow_mood(uint8_t interval) { | |||
static uint16_t current_hue = 0; | |||
static uint16_t last_timer = 0; | |||
if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_RAINBOW_MOOD_INTERVALS[interval])) { | |||
return; | |||
} | |||
last_timer = timer_read(); | |||
rgblight_sethsv_noeeprom_old(current_hue, rgblight_config.sat, rgblight_config.val); | |||
current_hue = (current_hue + 1) % 360; | |||
} | |||
void rgblight_effect_rainbow_swirl(uint8_t interval) { | |||
static uint16_t current_hue = 0; | |||
static uint16_t last_timer = 0; | |||
uint16_t hue; | |||
uint8_t i; | |||
if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_RAINBOW_SWIRL_INTERVALS[interval / 2])) { | |||
return; | |||
} | |||
last_timer = timer_read(); | |||
for (i = 0; i < RGBLED_NUM; i++) { | |||
hue = (360 / RGBLED_NUM * i + current_hue) % 360; | |||
sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); | |||
} | |||
rgblight_set(); | |||
if (interval % 2) { | |||
current_hue = (current_hue + 1) % 360; | |||
} else { | |||
if (current_hue - 1 < 0) { | |||
current_hue = 359; | |||
} else { | |||
current_hue = current_hue - 1; | |||
} | |||
} | |||
} | |||
void rgblight_effect_snake(uint8_t interval) { | |||
static uint8_t pos = 0; | |||
static uint16_t last_timer = 0; | |||
uint8_t i, j; | |||
int8_t k; | |||
int8_t increment = 1; | |||
if (interval % 2) { | |||
increment = -1; | |||
} | |||
if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_SNAKE_INTERVALS[interval / 2])) { | |||
return; | |||
} | |||
last_timer = timer_read(); | |||
for (i = 0; i < RGBLED_NUM; i++) { | |||
led[i].r = 0; | |||
led[i].g = 0; | |||
led[i].b = 0; | |||
for (j = 0; j < RGBLIGHT_EFFECT_SNAKE_LENGTH; j++) { | |||
k = pos + j * increment; | |||
if (k < 0) { | |||
k = k + RGBLED_NUM; | |||
} | |||
if (i == k) { | |||
sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); | |||
} | |||
} | |||
} | |||
rgblight_set(); | |||
if (increment == 1) { | |||
if (pos - 1 < 0) { | |||
pos = RGBLED_NUM - 1; | |||
} else { | |||
pos -= 1; | |||
} | |||
} else { | |||
pos = (pos + 1) % RGBLED_NUM; | |||
} | |||
} | |||
void rgblight_effect_knight(uint8_t interval) { | |||
static uint16_t last_timer = 0; | |||
if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) { | |||
return; | |||
} | |||
last_timer = timer_read(); | |||
static int8_t low_bound = 0; | |||
static int8_t high_bound = RGBLIGHT_EFFECT_KNIGHT_LENGTH - 1; | |||
static int8_t increment = 1; | |||
uint8_t i, cur; | |||
// Set all the LEDs to 0 | |||
for (i = 0; i < RGBLED_NUM; i++) { | |||
led[i].r = 0; | |||
led[i].g = 0; | |||
led[i].b = 0; | |||
} | |||
// Determine which LEDs should be lit up | |||
for (i = 0; i < RGBLIGHT_EFFECT_KNIGHT_LED_NUM; i++) { | |||
cur = (i + RGBLIGHT_EFFECT_KNIGHT_OFFSET) % RGBLED_NUM; | |||
if (i >= low_bound && i <= high_bound) { | |||
sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[cur]); | |||
} else { | |||
led[cur].r = 0; | |||
led[cur].g = 0; | |||
led[cur].b = 0; | |||
} | |||
} | |||
rgblight_set(); | |||
// Move from low_bound to high_bound changing the direction we increment each | |||
// time a boundary is hit. | |||
low_bound += increment; | |||
high_bound += increment; | |||
if (high_bound <= 0 || low_bound >= RGBLIGHT_EFFECT_KNIGHT_LED_NUM - 1) { | |||
increment = -increment; | |||
} | |||
} | |||
void rgblight_effect_christmas(void) { | |||
static uint16_t current_offset = 0; | |||
static uint16_t last_timer = 0; | |||
uint16_t hue; | |||
uint8_t i; | |||
if (timer_elapsed(last_timer) < RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL) { | |||
return; | |||
} | |||
last_timer = timer_read(); | |||
current_offset = (current_offset + 1) % 2; | |||
for (i = 0; i < RGBLED_NUM; i++) { | |||
hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + current_offset) % 2) * 120; | |||
sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); | |||
} | |||
rgblight_set(); | |||
} | |||
void rgblight_effect_rgbtest(void) { | |||
static uint8_t pos = 0; | |||
static uint16_t last_timer = 0; | |||
static uint8_t maxval = 0; | |||
uint8_t g; uint8_t r; uint8_t b; | |||
if (timer_elapsed(last_timer) < pgm_read_word(&RGBLED_RGBTEST_INTERVALS[0])) { | |||
return; | |||
} | |||
if( maxval == 0 ) { | |||
LED_TYPE tmp_led; | |||
sethsv(0, 255, RGBLIGHT_LIMIT_VAL, &tmp_led); | |||
maxval = tmp_led.r; | |||
} | |||
last_timer = timer_read(); | |||
g = r = b = 0; | |||
switch( pos ) { | |||
case 0: r = maxval; break; | |||
case 1: g = maxval; break; | |||
case 2: b = maxval; break; | |||
} | |||
rgblight_setrgb(r, g, b); | |||
pos = (pos + 1) % 3; | |||
} | |||
#endif /* RGBLIGHT_ANIMATIONS */ |
@ -0,0 +1,75 @@ | |||
# MCU name | |||
#MCU = at90usb1286 | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
CONSOLE_ENABLE = no # Console for debug(+400) | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default | |||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) | |||
UNICODE_ENABLE = no # Unicode | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
# Remove the common RGB light code and use my iteration instead | |||
OPT_DEFS += -DRGBLIGHT_ENABLE | |||
SRC += rgblight.c | |||
SRC += ws2812.c | |||
CIE1931_CURVE = yes | |||
LED_BREATHING_TABLE = yes |
@ -0,0 +1,42 @@ | |||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
#include "mxss_frontled.h" | |||
// Helpful defines | |||
#define _______ KC_TRNS | |||
// Predefined colors for layers | |||
// Format: {hue, saturation} | |||
// {0, 0} to turn off the LED | |||
// Add additional rows to handle more layers | |||
hs_set layer_colors[] = { | |||
[0] = {0, 0}, // Color for Layer 0 | |||
[1] = {86, 255}, // Color for Layer 1 | |||
[2] = {36, 255}, // Color for Layer 2 | |||
[3] = {185, 255}, // Color for Layer 3 | |||
}; | |||
const size_t lc_size = sizeof(layer_colors) / sizeof(uint16_t); | |||
// Use NEW_SAFE_RANGE to define new custom keycodes in order to not overwrite the ones used for front LED control | |||
enum custom_keycodes { | |||
MY_KEYCODE = NEW_SAFE_RANGE, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
__KEYMAP_GOES_HERE__ | |||
}; |