Co-authored-by: jack <0x6a73@protonmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/19470/head
@ -0,0 +1,57 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } | |||
#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0 } | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
#define FORCE_NKRO |
@ -0,0 +1,115 @@ | |||
{ | |||
"keyboard_name": "Tata80_wk", | |||
"manufacturer": "wuque studio", | |||
"url": "https://shop.wuquestudio.com/products/tata80-keyboard-kit", | |||
"maintainer": "Koichi Katano", | |||
"usb": { | |||
"vid": "0x2365", | |||
"pid": "0x0168", | |||
"device_version": "0.0.1" | |||
}, | |||
"processor": "atmega32u4", | |||
"bootloader": "atmel-dfu", | |||
"indicators": { | |||
"caps_lock": "E6" | |||
}, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ "label": "Esc", "x": 0, "y": 0 }, | |||
{ "label": "F1", "x": 1.25, "y": 0 }, | |||
{ "label": "F2", "x": 2.25, "y": 0 }, | |||
{ "label": "F3", "x": 3.25, "y": 0 }, | |||
{ "label": "F4", "x": 4.25, "y": 0 }, | |||
{ "label": "F5", "x": 5.5, "y": 0 }, | |||
{ "label": "F6", "x": 6.5, "y": 0 }, | |||
{ "label": "F7", "x": 7.5, "y": 0 }, | |||
{ "label": "F8", "x": 8.5, "y": 0 }, | |||
{ "label": "F9", "x": 9.75, "y": 0 }, | |||
{ "label": "F10", "x": 10.75, "y": 0 }, | |||
{ "label": "F11", "x": 11.75, "y": 0 }, | |||
{ "label": "F12", "x": 12.75, "y": 0 }, | |||
{ "label": "F13", "x": 14, "y": 0 }, | |||
{ "label": "Print", "x": 15.25, "y": 0 }, | |||
{ "label": "Scroll", "x": 16.25, "y": 0 }, | |||
{ "label": "Pause", "x": 17.25, "y": 0 }, | |||
{ "label": "~", "x": 0, "y": 1.25 }, | |||
{ "label": "1", "x": 1, "y": 1.25 }, | |||
{ "label": "2", "x": 2, "y": 1.25 }, | |||
{ "label": "3", "x": 3, "y": 1.25 }, | |||
{ "label": "4", "x": 4, "y": 1.25 }, | |||
{ "label": "5", "x": 5, "y": 1.25 }, | |||
{ "label": "6", "x": 6, "y": 1.25 }, | |||
{ "label": "7", "x": 7, "y": 1.25 }, | |||
{ "label": "8", "x": 8, "y": 1.25 }, | |||
{ "label": "9", "x": 9, "y": 1.25 }, | |||
{ "label": "0", "x": 10, "y": 1.25 }, | |||
{ "label": "-", "x": 11, "y": 1.25 }, | |||
{ "label": "=", "x": 12, "y": 1.25 }, | |||
{ "label": "Backspace", "x": 13, "y": 1.25, "w": 2 }, | |||
{ "label": "Insert", "x": 15.25, "y": 1.25 }, | |||
{ "label": "Home", "x": 16.25, "y": 1.25 }, | |||
{ "label": "PageUp", "x": 17.25, "y": 1.25 }, | |||
{ "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, | |||
{ "label": "Q", "x": 1.5, "y": 2.25 }, | |||
{ "label": "W", "x": 2.5, "y": 2.25 }, | |||
{ "label": "E", "x": 3.5, "y": 2.25 }, | |||
{ "label": "R", "x": 4.5, "y": 2.25 }, | |||
{ "label": "T", "x": 5.5, "y": 2.25 }, | |||
{ "label": "Y", "x": 6.5, "y": 2.25 }, | |||
{ "label": "U", "x": 7.5, "y": 2.25 }, | |||
{ "label": "I", "x": 8.5, "y": 2.25 }, | |||
{ "label": "O", "x": 9.5, "y": 2.25 }, | |||
{ "label": "P", "x": 10.5, "y": 2.25 }, | |||
{ "label": "[", "x": 11.5, "y": 2.25 }, | |||
{ "label": "]", "x": 12.5, "y": 2.25 }, | |||
{ "label": "\\", "x": 13.5, "y": 2.25, "w": 1.5 }, | |||
{ "label": "Delete", "x": 15.25, "y": 2.25 }, | |||
{ "label": "End", "x": 16.25, "y": 2.25 }, | |||
{ "label": "PageDown", "x": 17.25, "y": 2.25 }, | |||
{ "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, | |||
{ "label": "A", "x": 1.75, "y": 3.25 }, | |||
{ "label": "S", "x": 2.75, "y": 3.25 }, | |||
{ "label": "D", "x": 3.75, "y": 3.25 }, | |||
{ "label": "F", "x": 4.75, "y": 3.25 }, | |||
{ "label": "G", "x": 5.75, "y": 3.25 }, | |||
{ "label": "H", "x": 6.75, "y": 3.25 }, | |||
{ "label": "J", "x": 7.75, "y": 3.25 }, | |||
{ "label": "K", "x": 8.75, "y": 3.25 }, | |||
{ "label": "L", "x": 9.75, "y": 3.25 }, | |||
{ "label": ";", "x": 10.75, "y": 3.25 }, | |||
{ "label": "'", "x": 11.75, "y": 3.25 }, | |||
{ "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, | |||
{ "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 }, | |||
{ "label": "Z", "x": 2.25, "y": 4.25 }, | |||
{ "label": "X", "x": 3.25, "y": 4.25 }, | |||
{ "label": "C", "x": 4.25, "y": 4.25 }, | |||
{ "label": "V", "x": 5.25, "y": 4.25 }, | |||
{ "label": "B", "x": 6.25, "y": 4.25 }, | |||
{ "label": "N", "x": 7.25, "y": 4.25 }, | |||
{ "label": "M", "x": 8.25, "y": 4.25 }, | |||
{ "label": ",", "x": 9.25, "y": 4.25 }, | |||
{ "label": ".", "x": 10.25, "y": 4.25 }, | |||
{ "label": "/", "x": 11.25, "y": 4.25 }, | |||
{ "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 }, | |||
{ "label": "\u2191", "x": 16.25, "y": 4.25 }, | |||
{ "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Space", "x": 3.75, "y": 5.25, "w": 6.25 }, | |||
{ "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Fn", "x": 11.25, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Win", "x": 12.5, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25 }, | |||
{ "label": "\u2190", "x": 15.25, "y": 5.25 }, | |||
{ "label": "\u2193", "x": 16.25, "y": 5.25 }, | |||
{ "label": "\u2192", "x": 17.25, "y": 5.25 } | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,36 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SCRL, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,51 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SCRL, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[2] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[3] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
LTO_ENABLE = yes |
@ -0,0 +1,19 @@ | |||
# Tata80 | |||
Support Atmega32u4 keyboard, with a specific configuration | |||
* Keyboard Maintainer: [zoumeiguang2000](https://github.com/zoumeiguang2000) | |||
* Hardware Supported: Atmega32u4 | |||
## Bootloader | |||
* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware | |||
Make example for this keyboard (after setting up your build environment): | |||
make wuque/tata80/wk:default | |||
Flashing example for this keyboard: | |||
make wuque/tata80/wk:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,13 @@ | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
@ -0,0 +1,16 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "wk.h" |
@ -0,0 +1,44 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, k016, \ | |||
k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, \ | |||
k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, \ | |||
k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k313, \ | |||
k400, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k413, k415, \ | |||
k500, k501, k502, k506, k509, k510, k511, k513, k514, k515, k516 \ | |||
) \ | |||
{ \ | |||
{ k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, k016 }, \ | |||
{ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116 }, \ | |||
{ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216 }, \ | |||
{ k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, KC_NO, k313, KC_NO, KC_NO, KC_NO }, \ | |||
{ k400, KC_NO, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, KC_NO, k413, KC_NO, k415, KC_NO }, \ | |||
{ k500, k501, k502, KC_NO, KC_NO, KC_NO, k506, KC_NO, KC_NO, k509, k510, k511, KC_NO, k513, k514, k515, k516 } \ | |||
} |
@ -0,0 +1,57 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 } | |||
#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0, B7, B3, B2, B1, B0 } | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
#define FORCE_NKRO |
@ -0,0 +1,114 @@ | |||
{ | |||
"keyboard_name": "Tata80_wkl", | |||
"manufacturer": "wuque studio", | |||
"url": "https://shop.wuquestudio.com/products/tata80-keyboard-kit", | |||
"maintainer": "Koichi Katano", | |||
"usb": { | |||
"vid": "0x2365", | |||
"pid": "0x0169", | |||
"device_version": "0.0.1" | |||
}, | |||
"processor": "atmega32u4", | |||
"bootloader": "atmel-dfu", | |||
"indicators": { | |||
"caps_lock": "E6" | |||
}, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{ "label": "Esc", "x": 0, "y": 0 }, | |||
{ "label": "F1", "x": 1.25, "y": 0 }, | |||
{ "label": "F2", "x": 2.25, "y": 0 }, | |||
{ "label": "F3", "x": 3.25, "y": 0 }, | |||
{ "label": "F4", "x": 4.25, "y": 0 }, | |||
{ "label": "F5", "x": 5.5, "y": 0 }, | |||
{ "label": "F6", "x": 6.5, "y": 0 }, | |||
{ "label": "F7", "x": 7.5, "y": 0 }, | |||
{ "label": "F8", "x": 8.5, "y": 0 }, | |||
{ "label": "F9", "x": 9.75, "y": 0 }, | |||
{ "label": "F10", "x": 10.75, "y": 0 }, | |||
{ "label": "F11", "x": 11.75, "y": 0 }, | |||
{ "label": "F12", "x": 12.75, "y": 0 }, | |||
{ "label": "Print", "x": 15.25, "y": 0 }, | |||
{ "label": "Scroll", "x": 16.25, "y": 0 }, | |||
{ "label": "Pause", "x": 17.25, "y": 0 }, | |||
{ "label": "~", "x": 0, "y": 1.25 }, | |||
{ "label": "1", "x": 1, "y": 1.25 }, | |||
{ "label": "2", "x": 2, "y": 1.25 }, | |||
{ "label": "3", "x": 3, "y": 1.25 }, | |||
{ "label": "4", "x": 4, "y": 1.25 }, | |||
{ "label": "5", "x": 5, "y": 1.25 }, | |||
{ "label": "6", "x": 6, "y": 1.25 }, | |||
{ "label": "7", "x": 7, "y": 1.25 }, | |||
{ "label": "8", "x": 8, "y": 1.25 }, | |||
{ "label": "9", "x": 9, "y": 1.25 }, | |||
{ "label": "0", "x": 10, "y": 1.25 }, | |||
{ "label": "-", "x": 11, "y": 1.25 }, | |||
{ "label": "=", "x": 12, "y": 1.25 }, | |||
{ "label": "Backspace", "x": 13, "y": 1.25, "w": 2 }, | |||
{ "label": "Insert", "x": 15.25, "y": 1.25 }, | |||
{ "label": "Home", "x": 16.25, "y": 1.25 }, | |||
{ "label": "PageUp", "x": 17.25, "y": 1.25 }, | |||
{ "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, | |||
{ "label": "Q", "x": 1.5, "y": 2.25 }, | |||
{ "label": "W", "x": 2.5, "y": 2.25 }, | |||
{ "label": "E", "x": 3.5, "y": 2.25 }, | |||
{ "label": "R", "x": 4.5, "y": 2.25 }, | |||
{ "label": "T", "x": 5.5, "y": 2.25 }, | |||
{ "label": "Y", "x": 6.5, "y": 2.25 }, | |||
{ "label": "U", "x": 7.5, "y": 2.25 }, | |||
{ "label": "I", "x": 8.5, "y": 2.25 }, | |||
{ "label": "O", "x": 9.5, "y": 2.25 }, | |||
{ "label": "P", "x": 10.5, "y": 2.25 }, | |||
{ "label": "[", "x": 11.5, "y": 2.25 }, | |||
{ "label": "]", "x": 12.5, "y": 2.25 }, | |||
{ "label": "\\", "x": 13.5, "y": 2.25, "w": 1.5 }, | |||
{ "label": "Delete", "x": 15.25, "y": 2.25 }, | |||
{ "label": "End", "x": 16.25, "y": 2.25 }, | |||
{ "label": "PageDown", "x": 17.25, "y": 2.25 }, | |||
{ "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, | |||
{ "label": "A", "x": 1.75, "y": 3.25 }, | |||
{ "label": "S", "x": 2.75, "y": 3.25 }, | |||
{ "label": "D", "x": 3.75, "y": 3.25 }, | |||
{ "label": "F", "x": 4.75, "y": 3.25 }, | |||
{ "label": "G", "x": 5.75, "y": 3.25 }, | |||
{ "label": "H", "x": 6.75, "y": 3.25 }, | |||
{ "label": "J", "x": 7.75, "y": 3.25 }, | |||
{ "label": "K", "x": 8.75, "y": 3.25 }, | |||
{ "label": "L", "x": 9.75, "y": 3.25 }, | |||
{ "label": ";", "x": 10.75, "y": 3.25 }, | |||
{ "label": "'", "x": 11.75, "y": 3.25 }, | |||
{ "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, | |||
{ "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 }, | |||
{ "label": "Z", "x": 2.25, "y": 4.25 }, | |||
{ "label": "X", "x": 3.25, "y": 4.25 }, | |||
{ "label": "C", "x": 4.25, "y": 4.25 }, | |||
{ "label": "V", "x": 5.25, "y": 4.25 }, | |||
{ "label": "B", "x": 6.25, "y": 4.25 }, | |||
{ "label": "N", "x": 7.25, "y": 4.25 }, | |||
{ "label": "M", "x": 8.25, "y": 4.25 }, | |||
{ "label": ",", "x": 9.25, "y": 4.25 }, | |||
{ "label": ".", "x": 10.25, "y": 4.25 }, | |||
{ "label": "/", "x": 11.25, "y": 4.25 }, | |||
{ "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 }, | |||
{ "label": "\u2191", "x": 16.25, "y": 4.25 }, | |||
{ "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Space", "x": 3.75, "y": 5.25, "w": 6.25 }, | |||
{ "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Fn", "x": 11.25, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Win", "x": 12.5, "y": 5.25, "w": 1.25 }, | |||
{ "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25 }, | |||
{ "label": "\u2190", "x": 15.25, "y": 5.25 }, | |||
{ "label": "\u2193", "x": 16.25, "y": 5.25 }, | |||
{ "label": "\u2192", "x": 17.25, "y": 5.25 } | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,36 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,51 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT( | |||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
[1] = LAYOUT( | |||
_______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[2] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
), | |||
[3] = LAYOUT( | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ | |||
) | |||
}; |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
LTO_ENABLE = yes |
@ -0,0 +1,19 @@ | |||
# Tata80 | |||
Support Atmega32u4 keyboard, with a specific configuration | |||
* Keyboard Maintainer: [zoumeiguang2000](https://github.com/zoumeiguang2000) | |||
* Hardware Supported: Atmega32u4 | |||
## Bootloader | |||
* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware | |||
Make example for this keyboard (after setting up your build environment): | |||
make wuque/tata80/wkl:default | |||
Flashing example for this keyboard: | |||
make wuque/tata80/wkl:default:flash | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,13 @@ | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = no # Enable N-Key Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
AUDIO_ENABLE = no # Audio output | |||
@ -0,0 +1,17 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "wkl.h" | |||
@ -0,0 +1,44 @@ | |||
/* Copyright 2022 wuque | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, k016, \ | |||
k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116, \ | |||
k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216, \ | |||
k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k313, \ | |||
k400, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k413, k415, \ | |||
k500, k501, k502, k506, k509, k510, k511, k513, k514, k515, k516 \ | |||
) \ | |||
{ \ | |||
{ k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, k016 }, \ | |||
{ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115, k116 }, \ | |||
{ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215, k216 }, \ | |||
{ k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, KC_NO, k313, KC_NO, KC_NO, KC_NO }, \ | |||
{ k400, KC_NO, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, KC_NO, k413, KC_NO, k415, KC_NO }, \ | |||
{ k500, k501, k502, KC_NO, KC_NO, KC_NO, k506, KC_NO, KC_NO, k509, k510, k511, KC_NO, k513, k514, k515, k516 } \ | |||
} |