Merge branch 'develop' into dev_board

builddefs/build_keyboard.mk

@@ -521,22 +521,14 @@ ifeq ($(strip $(KEEP_INTERMEDIATES)), yes)
     OPT_DEFS += -save-temps=obj
 endif
 
-# TODO: remove this bodge?
-PROJECT_DEFS := $(OPT_DEFS)
-PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
-PROJECT_CONFIG := $(CONFIG_H)
-
-CONFIG_H += $(POST_CONFIG_H)
-ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
-
 OUTPUTS := $(INTERMEDIATE_OUTPUT)
 $(INTERMEDIATE_OUTPUT)_SRC := $(SRC) $(PLATFORM_SRC)
-$(INTERMEDIATE_OUTPUT)_DEFS := $(OPT_DEFS) \
+$(INTERMEDIATE_OUTPUT)_DEFS := \
 	-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(INTERMEDIATE_OUTPUT)/src/default_keyboard.h\" \
 	-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
-	$(PROJECT_DEFS)
-$(INTERMEDIATE_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS) $(PROJECT_INC)
-$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(PROJECT_CONFIG)
+	$(OPT_DEFS)
+$(INTERMEDIATE_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
+$(INTERMEDIATE_OUTPUT)_CONFIG := $(CONFIG_H) $(POST_CONFIG_H)
 
 # Default target.
 all: build check-size

builddefs/common_features.mk

@@ -353,7 +353,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
     COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations
     COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations/runners
     POST_CONFIG_H += $(QUANTUM_DIR)/led_matrix/post_config.h
-    SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_led_matrix.c
     SRC += $(QUANTUM_DIR)/led_matrix/led_matrix.c
     SRC += $(QUANTUM_DIR)/led_matrix/led_matrix_drivers.c
     LIB8TION_ENABLE := yes

data/constants/keycodes/keycodes_0.0.4_lighting.hjson

@@ -0,0 +1,67 @@
+{
+    "keycodes": {
+        "0x7810": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_ON",
+            "aliases": [
+                "LM_ON"
+            ]
+        },
+        "0x7811": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_OFF",
+            "aliases": [
+                "LM_OFF"
+            ]
+        },
+        "0x7812": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_TOGGLE",
+            "aliases": [
+                "LM_TOGG"
+            ]
+        },
+        "0x7813": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_MODE_NEXT",
+            "aliases": [
+                "LM_NEXT"
+            ]
+        },
+        "0x7814": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_MODE_PREVIOUS",
+            "aliases": [
+                "LM_PREV"
+            ]
+        },
+        "0x7815": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_BRIGHTNESS_UP",
+            "aliases": [
+                "LM_BRIU"
+            ]
+        },
+        "0x7816": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_BRIGHTNESS_DOWN",
+            "aliases": [
+                "LM_BRID"
+            ]
+        },
+        "0x7817": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_SPEED_UP",
+            "aliases": [
+                "LM_SPDU"
+            ]
+        },
+        "0x7818": {
+            "group": "led_matrix",
+            "key": "QK_LED_MATRIX_SPEED_DOWN",
+            "aliases": [
+                "LM_SPDD"
+            ]
+        }
+    }
+}

docs/feature_led_matrix.md

@@ -217,16 +217,17 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
 
 ## Keycodes :id=keycodes
 
-All LED matrix keycodes are currently shared with the [Backlight feature](feature_backlight.md).
-
-| Key                     | Aliases   | Description                   |
-|-------------------------|-----------|-------------------------------|
-| `QK_BACKLIGHT_TOGGLE`   | `BL_TOGG` | Toggle LED Matrix on or off   |
-| `QK_BACKLIGHT_STEP`     | `BL_STEP` | Cycle through modes           |
-| `QK_BACKLIGHT_ON`       | `BL_ON`   | Turn on LED Matrix            |
-| `QK_BACKLIGHT_OFF`      | `BL_OFF`  | Turn off LED Matrix           |
-| `QK_BACKLIGHT_UP`       | `BL_UP`   | Increase the brightness level |
-| `QK_BACKLIGHT_DOWN`     | `BL_DOWN` | Decrease the brightness level |
+|Key                            |Aliases  |Description                        |
+|-------------------------------|---------|-----------------------------------|
+|`QK_LED_MATRIX_ON`             |`LM_ON`  |Turn on LED Matrix                 |
+|`QK_LED_MATRIX_OFF`            |`LM_OFF` |Turn off LED Matrix                |
+|`QK_LED_MATRIX_TOGGLE`         |`LM_TOGG`|Toggle LED Matrix on or off        |
+|`QK_LED_MATRIX_MODE_NEXT`      |`LM_NEXT`|Cycle through animations           |
+|`QK_LED_MATRIX_MODE_PREVIOUS`  |`LM_PREV`|Cycle through animations in reverse|
+|`QK_LED_MATRIX_BRIGHTNESS_UP`  |`LM_BRIU`|Increase the brightness level      |
+|`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level      |
+|`QK_LED_MATRIX_SPEED_UP`       |`LM_SPDU`|Increase the animation speed       |
+|`QK_LED_MATRIX_SPEED_DOWN`     |`LM_SPDD`|Decrease the animation speed       |
 
 ## LED Matrix Effects :id=led-matrix-effects
 

docs/feature_sequencer.md

@@ -44,7 +44,7 @@ While the tempo defines the absolute speed at which the sequencer goes through t
 |-------------------------------|---------|---------------------------------------------------|
 |`QK_SEQUENCER_ON`              |`SQ_ON`  |Start the step sequencer                           |
 |`QK_SEQUENCER_OFF`             |`SQ_OFF` |Stop the step sequencer                            |
-|`QK_SEQUENCER_TOGGLE`          |`SQ_TOG` |Toggle the step sequencer playback                 |
+|`QK_SEQUENCER_TOGGLE`          |`SQ_TOGG`|Toggle the step sequencer playback                 |
 |`QK_SEQUENCER_STEPS_ALL`       |`SQ_SALL`|Enable all the steps                               |
 |`QK_SEQUENCER_STEPS_CLEAR`     |`SQ_SCLR`|Disable all the steps                              |
 |`QK_SEQUENCER_TEMPO_DOWN`      |`SQ_TMPD`|Decrease the tempo                                 |

docs/feature_split_keyboard.md

@@ -266,7 +266,7 @@ This enables syncing of the Host LED status (caps lock, num lock, etc) between b
 #define SPLIT_MODS_ENABLE
 ```
 
-This enables transmitting modifier state (normal, weak and oneshot) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
+This enables transmitting modifier state (normal, weak, oneshot and oneshot locked) to the non primary side of the split keyboard. The purpose of this feature is to support cosmetic use of modifer state (e.g. displaying status on an OLED screen).
 
 ```c
 #define SPLIT_WPM_ENABLE

docs/hand_wire.md

@@ -175,7 +175,7 @@ As you move along, be sure that the controller is staying in place - recutting a
 
 From here, you should have a working keyboard once you program a firmware.
 
-Simple firmware can be created easily using the [Keyboard Firmware Builder](https://kbfirmware.com/) website.  Recreate your layout using [Keyboard Layout Editor](https://www.keyboard-layout-editor.com), import it and recreate the matrix (if not already done as part of [planning the matrix](#planning-the-matrix).
+Simple firmware can be created easily using the [Keyboard Firmware Builder](https://kbfirmware.com/) website.  Recreate your layout using [Keyboard Layout Editor](https://www.keyboard-layout-editor.com), import it and recreate the matrix (if not already done as part of [planning the matrix](#planning-the-matrix)).
 
 Go through the rest of the tabs, assigning keys until you get to the last one where you can compile and download your firmware.  The .hex file can be flashed straight onto your keyboard, or for advanced functionality, compiled locally after [Setting up Your Environment](newbs_getting_started.md).
 

docs/keycodes.md

@@ -398,6 +398,22 @@ See also: [Leader Key](feature_leader_key.md)
 |---------|------------------------|
 |`QK_LEAD`|Begins a leader sequence|
 
+## LED Matrix :id=led-matrix
+
+See also: [LED Matrix](feature_led_matrix.md)
+
+|Key                            |Aliases  |Description                        |
+|-------------------------------|---------|-----------------------------------|
+|`QK_LED_MATRIX_ON`             |`LM_ON`  |Turn on LED Matrix                 |
+|`QK_LED_MATRIX_OFF`            |`LM_OFF` |Turn off LED Matrix                |
+|`QK_LED_MATRIX_TOGGLE`         |`LM_TOGG`|Toggle LED Matrix on or off        |
+|`QK_LED_MATRIX_MODE_NEXT`      |`LM_NEXT`|Cycle through animations           |
+|`QK_LED_MATRIX_MODE_PREVIOUS`  |`LM_PREV`|Cycle through animations in reverse|
+|`QK_LED_MATRIX_BRIGHTNESS_UP`  |`LM_BRIU`|Increase the brightness level      |
+|`QK_LED_MATRIX_BRIGHTNESS_DOWN`|`LM_BRID`|Decrease the brightness level      |
+|`QK_LED_MATRIX_SPEED_UP`       |`LM_SPDU`|Increase the animation speed       |
+|`QK_LED_MATRIX_SPEED_DOWN`     |`LM_SPDD`|Decrease the animation speed       |
+
 ## Magic Keycodes :id=magic-keycodes
 
 See also: [Magic Keycodes](keycodes_magic.md)

keyboards/0xcb/splaytoraid/32u4/keyboard.json

@@ -0,0 +1,27 @@
+{
+    "development_board": "promicro",
+    "bootloader": "qmk-dfu",
+    "matrix_pins": {
+        "cols": ["F5", "F6", "F7", "F4", "B3", "B1", "B2"],
+        "rows": ["D3", "D2", "D1", "D4", "D7", "E6", "B4", "C6"]
+    },
+    "diode_direction": "COL2ROW",
+    "rgb_matrix": {
+        "animations": {
+            "band_sat": true,
+            "band_spiral_val": true,
+            "breathing": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
+            "raindrops": true
+        }
+    },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "B5", "pin_b": "B6"}
+        ]
+    },
+    "ws2812": {
+        "pin": "D0"
+    }
+}

keyboards/0xcb/splaytoraid/info.json

@@ -3,13 +3,6 @@
     "keyboard_name": "splaytoraid",
     "maintainer": "freya-irl",
     "url": "https://github.com/freya-irl/splaytoraid40",
-    "development_board": "promicro",
-    "bootloader": "qmk-dfu",
-    "diode_direction": "COL2ROW",
-    "matrix_pins": {
-        "cols": ["F5", "F6", "F7", "F4", "B3", "B1", "B2"],
-        "rows": ["D3", "D2", "D1", "D4", "D7", "E6", "B4", "C6"]
-    },
     "usb": {
         "device_version": "1.0.0",
         "pid": "0xCB00",
@@ -21,7 +14,8 @@
         "bootmagic": true,
         "console": true,
         "mousekey": true,
-        "nkro": true
+        "nkro": true,
+        "encoder": true
     },
     "bootmagic": {
         "matrix": [1, 0]
@@ -29,21 +23,7 @@
     "build": {
         "lto": true
     },
-    "encoder": {
-        "enabled": true,
-        "rotary": [
-            {"pin_a": "B5", "pin_b": "B6", "resolution": 4}
-        ]
-    },
     "rgb_matrix": {
-        "animations": {
-            "breathing": true,
-            "band_sat": true,
-            "band_spiral_val": true,
-            "cycle_all": true,
-            "raindrops": true,
-            "cycle_left_right": true
-        },
         "default": {
             "animation": "breathing",
             "hue": 152,
@@ -73,9 +53,6 @@
         ],
         "max_brightness": 200
     },
-    "ws2812": {
-        "pin": "D0"
-    },
     "layouts": {
         "LAYOUT_36": {
             "layout": [

keyboards/0xcb/splaytoraid/rp2040_ce/info.json → keyboards/0xcb/splaytoraid/rp2040_ce/keyboard.json

@@ -1,26 +1,44 @@
 {
+    "development_board": "promicro_rp2040",
+    "matrix_pins": {
+        "cols": ["GP28", "GP27", "GP26", "GP29", "GP20", "GP22", "GP23"],
+        "rows": ["GP0", "GP1", "GP2", "GP4", "GP6", "GP7", "GP8", "GP5"]
+    },
+    "diode_direction": "COL2ROW",
     "rgb_matrix": {
         "animations": {
-            "cycle_up_down": true,
-            "jellybean_raindrops": true,
+            "band_sat": true,
+            "band_spiral_val": true,
+            "breathing": true,
+            "cycle_all": true,
+            "cycle_left_right": true,
             "cycle_out_in": true,
             "cycle_out_in_dual": true,
-            "pixel_fractal": true,
-            "rainbow_moving_chevron": true,
             "cycle_pinwheel": true,
-            "pixel_rain": true,
+            "cycle_up_down": true,
+            "digital_rain": true,
             "dual_beacon": true,
             "hue_breathing": true,
-            "typing_heatmap": true,
-            "digital_rain": true,
-            "solid_reactive_simple": true,
+            "jellybean_raindrops": true,
+            "multisplash": true,
+            "pixel_fractal": true,
+            "pixel_rain": true,
+            "rainbow_moving_chevron": true,
+            "raindrops": true,
             "solid_reactive": true,
+            "solid_reactive_simple": true,
+            "solid_splash": true,
             "splash": true,
-            "multisplash": true,
-            "solid_splash": true
+            "typing_heatmap": true
         }
     },
+    "encoder": {
+        "rotary": [
+            {"pin_a": "GP9", "pin_b": "GP21"}
+        ]
+    },
     "ws2812": {
+        "pin": "GP3",
         "driver": "vendor"
     }
 }

keyboards/0xcb/splaytoraid/rp2040_ce/rules.mk

@@ -1 +0,0 @@
-CONVERT_TO = rp2040_ce

keyboards/25keys/cassette42/common/oled_helper.c

@@ -1,5 +1,7 @@
 #include "oled_helper.h"
-#include "quantum.h"
+#include "progmem.h"
+#include "rgblight.h"
+#include "oled_driver.h"
 #include <stdio.h>
 #include <string.h>
 

keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.c

@@ -14,8 +14,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include QMK_KEYBOARD_H
 #include "pimoroni_trackball.h"
 #include "i2c_master.h"
+#include "action.h"
+#include "timer.h"
+#include "print.h"
 
 static uint8_t scrolling      = 0;
 static int16_t x_offset       = 0;

keyboards/3w6/rev2/keymaps/default_pimoroni/pimoroni_trackball.h

@@ -16,8 +16,10 @@
 
 #pragma once
 
-#include "quantum.h"
+#include <stdint.h>
+#include <stdbool.h>
 #include "pointing_device.h"
+#include "report.h"
 
 #ifndef TRACKBALL_ADDRESS
 #    define TRACKBALL_ADDRESS (0x0A << 1)

keyboards/40percentclub/gherkin/info.json

@@ -8,16 +8,13 @@
     "pid": "0x6060",
     "device_version": "0.0.1"
   },
-  "matrix_pins": {
-    "cols": ["B4", "E6", "D7", "C6", "D4", "D0"],
-    "rows": ["F7", "B1", "B3", "B2", "B6"]
+  "features": {
+    "bootmagic": true,
+    "mousekey": true,
+    "extrakey": true,
+    "nkro": true,
+    "backlight": true
   },
-  "diode_direction": "COL2ROW",
-  "backlight": {
-    "pin": "B5"
-  },
-  "processor": "atmega32u4",
-  "bootloader": "caterina",
   "community_layouts": ["ortho_3x10"],
   "layouts": {
     "LAYOUT_ortho_3x10": {

keyboards/40percentclub/gherkin/kb2040/keyboard.json

@@ -0,0 +1,12 @@
+{
+    "development_board": "kb2040",
+    "matrix_pins": {
+        "cols": ["GP8", "GP7", "GP6", "GP5", "GP4", "GP3"],
+        "rows": ["GP26", "GP18", "GP20", "GP19", "GP10"]
+    },
+    "diode_direction": "COL2ROW",
+    "backlight": {
+        "pin": "GP9",
+        "driver": "software"
+    }
+}

keyboards/40percentclub/gherkin/kb2040/rules.mk

@@ -1 +0,0 @@
-CONVERT_TO = kb2040

keyboards/40percentclub/gherkin/keymaps/default/keymap.c

@@ -50,26 +50,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 
 };
-
-void keyboard_pre_init_user(void) {
-  // Call the keyboard pre init code.
-
-  // Set our LED pins as output
-  setPinOutput(D5);
-  setPinOutput(B0);
-}
-
-bool led_update_user(led_t led_state) {
-  if (led_state.num_lock) {
-    writePinLow(D5);
-  } else {
-    writePinHigh(D5);
-  }
-
-  if (led_state.caps_lock) {
-    writePinLow(B0);
-  } else {
-    writePinHigh(B0);
-  }
-  return false;
-}

keyboards/40percentclub/gherkin/pro_micro/keyboard.json

@@ -0,0 +1,16 @@
+{
+    "development_board": "promicro",
+    "matrix_pins": {
+        "cols": ["B4", "E6", "D7", "C6", "D4", "D0"],
+        "rows": ["F7", "B1", "B3", "B2", "B6"]
+    },
+    "diode_direction": "COL2ROW",
+    "indicators": {
+        "num_lock": "D5",
+        "caps_lock": "B0",
+        "on_state": 0
+    },
+    "backlight": {
+        "pin": "B5"
+    }
+}

keyboards/40percentclub/gherkin/rules.mk

@@ -1,16 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes	  # Mouse keys
-EXTRAKEY_ENABLE = yes	  # Audio control and System control
-CONSOLE_ENABLE = no	    # Console for debug
-COMMAND_ENABLE = no     # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
-
-# Disable unsupported hardware
-RGBLIGHT_SUPPORTED = no
-AUDIO_SUPPORTED = no

keyboards/abacus/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2020 nickolaij
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/abacus/keyboard.json

@@ -22,6 +22,12 @@
         "nkro": false,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F4", "F5", "F6", "F7", "B1", "D7", "B3", "E6", "B2", "B4", "B6", "B5"],
         "rows": ["D3", "D2", "D4", "C6"]

keyboards/abstract/ellipse/rev1/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2019 AbstractKB
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/abstract/ellipse/rev1/keyboard.json

@@ -18,6 +18,12 @@
         "nkro": false,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F0", "B6", "B5"],
         "rows": ["D3", "C7"]

keyboards/acekeyboard/titan60/config.h

@@ -1,23 +0,0 @@
-/*
-Copyright 2020 MechMerlin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/acekeyboard/titan60/keyboard.json

@@ -18,6 +18,12 @@
         "nkro": false,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
       "cols": ["F4", "F7", "F5", "F6", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D5", "D3"],
       "rows": ["B1", "B2", "B3", "F0", "F1"]

keyboards/acheron/apollo/87h/delta/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 #define WS2812_PWM_COMPLEMENTARY_OUTPUT

keyboards/acheron/apollo/87h/delta/keyboard.json

@@ -68,6 +68,12 @@
         "nkro": false,
         "rgb_matrix": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
         "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]

keyboards/acheron/apollo/87h/gamma/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 // RGB Matrix defines

keyboards/acheron/apollo/87h/gamma/info.json → keyboards/acheron/apollo/87h/gamma/keyboard.json

@@ -2,7 +2,10 @@
     "keyboard_name": "Apollo87H rev. Gamma",
     "usb": {
         "pid": "0x8774",
-        "device_version": "0.0.3"
+        "device_version": "0.0.3",
+        "shared_endpoint": {
+            "keyboard": true
+        }
     },
     "rgb_matrix": {
         "animations": {
@@ -57,6 +60,18 @@
         "driver": "is31fl3741",
         "sleep": true
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "rgb_matrix": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B3", "A15", "A10", "A8", "B14", "B12", "B10", "B1", "B0", "A7", "A4", "A5", "A6", "C15", "A0", "A1"],
         "rows": ["C14", "C13", "B9", "B4", "A3", "A2"]

keyboards/acheron/apollo/87h/gamma/rules.mk

@@ -1,15 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-RGB_MATRIX_ENABLE = yes
-KEYBOARD_SHARED_EP = yes
-

keyboards/acheron/apollo/87htsc/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 #define WS2812_PWM_COMPLEMENTARY_OUTPUT

keyboards/acheron/apollo/87htsc/keyboard.json

@@ -72,6 +72,12 @@
         "nkro": false,
         "rgb_matrix": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
         "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]

keyboards/acheron/apollo/88htsc/config.h

@@ -17,11 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 #define WS2812_PWM_COMPLEMENTARY_OUTPUT

keyboards/acheron/apollo/88htsc/keyboard.json

@@ -72,6 +72,12 @@
         "nkro": false,
         "rgb_matrix": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["C8", "C9", "A8", "A10", "C7", "C6", "B14", "B12", "B10", "B1", "C5", "C4", "A7", "B0", "C11", "A3", "B4"],
         "rows": ["B3", "D2", "C12", "A6", "A5", "A4"]

keyboards/acheron/arctic/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2015 Álvaro "Gondolindrim" Volpato  <gondolindrim@acheronproject.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/acheron/arctic/keyboard.json

@@ -16,6 +16,12 @@
         "mousekey": true,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B0", "A5", "A4", "A3", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8"],
         "rows": ["B7", "B6", "A6", "A7", "B1"]

keyboards/acheron/athena/alpha/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 

keyboards/acheron/athena/alpha/keyboard.json

@@ -17,6 +17,12 @@
         "nkro": true,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["A8", "B14", "B12", "B10", "B1", "B0", "A5", "A4", "A3", "A2", "A1", "A0", "C15", "A7", "B4", "B3", "A15"],
         "rows": ["B9", "C13", "B8", "B5", "A14", "C14"]

keyboards/acheron/athena/beta/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 
 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5

keyboards/acheron/athena/beta/keyboard.json

@@ -17,6 +17,12 @@
         "nkro": true,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["C7", "C6", "B14", "B12", "B10", "B1", "C4", "A7", "A6", "A5", "A4", "A3", "A2", "C5", "A10", "A8", "C9"],
         "rows": ["C11", "C12", "C10", "A15", "C0", "A1"]

keyboards/acheron/austin/config.h

@@ -21,11 +21,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PWM_CHANNEL   1
 #define BACKLIGHT_PAL_MODE      1
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/acheron/austin/keyboard.json

@@ -17,6 +17,12 @@
         "mousekey": true,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B10", "B11", "B12", "B13", "B14", "B15", "A8", "A9", "A10", "A5", "A15", "B3", "B4", "B5", "B8", "A3", "C15", "C14", "F1"],
         "rows": ["C13", "A4", "A7", "B0", "B1", "B2"]

keyboards/acheron/elongate/beta/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2020 Gondolindrim
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/acheron/elongate/beta/keyboard.json

@@ -41,6 +41,12 @@
         "nkro": false,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F5", "F6", "F4", "F1", "F0", "B2", "B1", "C6", "B0", "B3", "E6", "D4", "B4"],
         "rows": ["D3", "B7", "D5", "B5", "D6"]

keyboards/acheron/elongate/delta/config.h

@@ -23,11 +23,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 5)
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 // Elongate has six indicator LEDs. These def's are the indicator pin defs. The LEDs are distributed in two clusters: one next to the numpad and another between spacebars; LEDs are numbered top-to-bottom.
 
 #define LED1_PIN A2

keyboards/acheron/elongate/delta/keyboard.json

@@ -18,6 +18,12 @@
         "nkro": true,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["A10", "A9", "A8", "B14", "B12", "B11", "B10", "B2", "B1", "A7", "A5", "B9", "B8", "B7", "B6"],
         "rows": ["B3", "A15", "B0", "B4", "B5"]

keyboards/acheron/keebspcb/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/acheron/keebspcb/keyboard.json

@@ -16,6 +16,12 @@
         "mousekey": true,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B12", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "B9", "B8", "B7", "B6", "B5"],
         "rows": ["B4", "B3", "A2", "A3", "A4"]

keyboards/acheron/lasgweloth/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2015 Álvaro "Gondolindrim" Volpato  <gondolindrim@acheronproject.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/acheron/lasgweloth/keyboard.json

@@ -16,6 +16,12 @@
         "mousekey": true,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B12", "A2", "A1", "A0", "F1", "F0", "C15", "C14", "C13", "A7", "A6", "A5", "A4", "B7"],
         "rows": ["B9", "B8", "A3", "B0", "B1"]

keyboards/acheron/shark/alpha/config.h

@@ -19,11 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PWM_DRIVER PWMD3
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/acheron/shark/alpha/info.json

@@ -6,6 +6,20 @@
     "pid": "0x5368",
     "device_version": "0.0.1"
   },
+  "features": {
+    "bootmagic": true,
+    "mousekey": true,
+    "extrakey": true,
+    "console": true,
+    "command": true,
+    "encoder": true
+  },
+  "qmk": {
+    "locking": {
+      "enabled": true,
+      "resync": true
+    }
+  },
   "matrix_pins": {
     "cols": ["B1", "B12", "A1", "A7", "A5", "A4", "A3", "A2", "A0", "C15", "C14", "C13"],
     "rows": ["B4", "A15", "B10", "B2"]

keyboards/acheron/shark/alpha/rules.mk

@@ -1,17 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-ENCODER_ENABLE = yes
-
 # Disable unsupported hardware
 RGBLIGHT_SUPPORTED = no
 AUDIO_SUPPORTED = no

keyboards/acheron/shark/beta/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   1
 

keyboards/acheron/shark/beta/keyboard.json

@@ -15,6 +15,12 @@
         "nkro": true,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["A5", "A10", "C13", "B9", "B8", "B5", "B4", "B3", "A15", "A0", "A1", "A2"],
         "rows": ["A8", "B14", "A4", "A3"]

keyboards/acheron/themis/87h/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define WS2812_PWM_COMPLEMENTARY_OUTPUT
 #define WS2812_PWM_DRIVER PWMD1
 #define WS2812_PWM_CHANNEL 3

keyboards/acheron/themis/87h/keyboard.json

@@ -19,6 +19,12 @@
         "rgblight":  true,
         "nkro":      true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "diode_direction": "COL2ROW",
     "eeprom": {
         "wear_leveling": {

keyboards/acheron/themis/87htsc/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define WS2812_PWM_COMPLEMENTARY_OUTPUT
 #define WS2812_PWM_DRIVER PWMD1
 #define WS2812_PWM_CHANNEL 3

keyboards/acheron/themis/87htsc/keyboard.json

@@ -19,6 +19,12 @@
         "rgblight":  true,
         "nkro":      true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "diode_direction": "COL2ROW",
     "eeprom": {
         "wear_leveling": {

keyboards/acheron/themis/88htsc/config.h

@@ -17,9 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define LOCKING_SUPPORT_ENABLE
-#define LOCKING_RESYNC_ENABLE
-
 #define WS2812_PWM_COMPLEMENTARY_OUTPUT
 #define WS2812_PWM_DRIVER PWMD1
 #define WS2812_PWM_CHANNEL 3

keyboards/acheron/themis/88htsc/keyboard.json

@@ -19,6 +19,12 @@
         "rgblight":  true,
         "nkro":      true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "diode_direction": "COL2ROW",
     "eeprom": {
         "wear_leveling": {

keyboards/ada/infinity81/config.h

@@ -1,25 +0,0 @@
-// Copyright 2022 peepeetee (@peepeetee)
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/ada/infinity81/keyboard.json

@@ -38,6 +38,12 @@
         "nkro": false,
         "rgblight": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["D1", "D2", "D3", "D5", "D4", "D6", "D7", "B4", "B5", "B6", "C6", "C7", "F5", "F1", "F4"],
         "rows": ["B3", "B2", "B1", "B0", "F6", "B7"]

keyboards/adafruit/macropad/info.json

@@ -8,6 +8,16 @@
         "pid": "0x0108",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "nkro": true,
+        "audio": true,
+        "encoder": true,
+        "rgb_matrix": true,
+        "oled": true
+    },
     "audio": {
         "power_control": {
             "pin": "GP14"

keyboards/adafruit/macropad/rules.mk

@@ -1,17 +1,2 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = yes          # Audio output
 AUDIO_DRIVER = pwm_hardware
-ENCODER_ENABLE = yes
-RGB_MATRIX_ENABLE = yes
-OLED_ENABLE = yes
 OLED_TRANSPORT = spi

keyboards/adelheid/config.h

@@ -1,39 +0,0 @@
-/*
-Copyright 2020 floookay
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/adelheid/keyboard.json

@@ -17,6 +17,12 @@
         "mousekey": false,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["F0", "F1", "E6", "C7", "F6", "B6", "D4", "B1", "B0", "B7", "B5", "B4", "D7", "D6", "B3"],
         "rows": ["D0", "F4", "D1", "D2", "D3", "D5", "F7"]

keyboards/adkb96/rev1/config.h

@@ -1,40 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT

keyboards/adkb96/info.json → keyboards/adkb96/rev1/keyboard.json

@@ -8,12 +8,26 @@
         "pid": "0xAD96",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": false,
+        "mousekey": false,
+        "extrakey": true,
+        "command": true,
+        "nkro": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B6", "B2", "B3", "B1", "F7", "F6", "F5", "F4"],
         "rows": ["D4", "C6", "D7", "E6", "B4", "B5"]
     },
     "diode_direction": "COL2ROW",
     "split": {
+        "enabled": true,
         "soft_serial_pin": "D0"
     },
     "tapping": {

keyboards/adkb96/rules.mk

@@ -1,16 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
-
-SPLIT_KEYBOARD = yes
-
 DEFAULT_FOLDER = adkb96/rev1

keyboards/aeboards/aegis/keyboard.json

@@ -16,6 +16,12 @@
         "mousekey": false,
         "nkro": true
     },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["C7", "C6", "B7", "D2", "D3", "B3", "B2", "B1", "B0"],
         "rows": ["F5", "F6", "E6", "F7", "D1", "D0", "D6", "D4", "B4", "D7", "B6", "B5"]

keyboards/aeboards/constellation/rev1/config.h

@@ -1,24 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- * Copyright 2021 Harrison Chan (Xelus)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/aeboards/constellation/rev1/info.json → keyboards/aeboards/constellation/rev1/keyboard.json

@@ -8,6 +8,23 @@
         "pid": "0x065C",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": true,
+        "command": true,
+        "nkro": true
+    },
+    "build": {
+        "lto": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["E6", "D5", "B2", "B3", "D3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
         "rows": ["B0", "B1", "F0", "F1", "F4"]

keyboards/aeboards/constellation/rev1/rules.mk

@@ -1,12 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = yes

keyboards/aeboards/constellation/rev2/config.h

@@ -16,12 +16,6 @@
 
 #pragma once
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
 // I2C setup
 #define I2C1_SCL_PIN        B8
 #define I2C1_SDA_PIN        B9

keyboards/aeboards/constellation/rev2/info.json → keyboards/aeboards/constellation/rev2/keyboard.json

@@ -8,6 +8,19 @@
         "pid": "0x065C",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": true,
+        "nkro": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["B12", "A1", "H0", "C15", "C14", "B11", "B10", "B2", "B1", "B0", "A7", "A6", "A5", "A4", "A3"],
         "rows": ["B15", "A14", "A2", "B13", "B14"]

keyboards/aeboards/constellation/rev2/rules.mk

@@ -1,11 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output

keyboards/aeboards/constellation/rev3/config.h

@@ -1,24 +0,0 @@
-/* Copyright 2018 Jason Williams (Wilba)
- * Copyright 2021 Harrison Chan (Xelus)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/aeboards/constellation/rev3/info.json → keyboards/aeboards/constellation/rev3/keyboard.json

@@ -8,6 +8,23 @@
         "pid": "0x065D",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": true,
+        "command": true,
+        "nkro": true
+    },
+    "build": {
+        "lto": true
+    },
+    "qmk": {
+        "locking": {
+            "enabled": true,
+            "resync": true
+        }
+    },
     "matrix_pins": {
         "cols": ["E6", "D5", "B2", "B3", "D3", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"],
         "rows": ["B0", "B1", "F0", "F1", "F4"]

keyboards/aeboards/constellation/rev3/rules.mk

@@ -1,12 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = yes

keyboards/aeboards/ext65/rev1/info.json → keyboards/aeboards/ext65/rev1/keyboard.json

@@ -7,6 +7,12 @@
         "pid": "0xAE65",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": true,
+        "nkro": true
+    },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
     "diode_direction": "COL2ROW",

keyboards/aeboards/ext65/rev1/rules.mk

@@ -1,11 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output

keyboards/aeboards/ext65/rev2/info.json → keyboards/aeboards/ext65/rev2/keyboard.json

@@ -7,6 +7,16 @@
         "pid": "0xA652",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": true,
+        "nkro": true,
+        "backlight": true,
+        "rgblight": true,
+        "sleep_led": true
+    },
     "backlight": {
         "pin": "B5",
         "levels": 6,

keyboards/aeboards/ext65/rev2/rules.mk

@@ -1,14 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-SLEEP_LED_ENABLE = yes
-

keyboards/aeboards/ext65/rev3/info.json

@@ -7,6 +7,15 @@
         "pid": "0xA653",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "nkro": true
+    },
+    "build": {
+        "lto": true
+    },
     "indicators": {
         "caps_lock": "F4",
         "num_lock": "F5",

keyboards/aeboards/ext65/rev3/rules.mk

@@ -1,13 +1 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
 OPT = 3
-LTO_ENABLE = yes

keyboards/aeboards/satellite/rev1/info.json

@@ -8,6 +8,16 @@
         "pid": "0x6553",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "nkro": true,
+        "rgb_matrix": true
+    },
+    "build": {
+        "lto": true
+    },
     "rgb_matrix": {
         "animations": {
             "alphas_mods": true,

keyboards/aeboards/satellite/rev1/rules.mk

@@ -1,18 +1,3 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = yes
-
-RGB_MATRIX_ENABLE = yes     # Enable RGB matrix effects.
-
 COMMON_VPATH += $(DRIVER_PATH)/issi
 
 # project specific files

keyboards/afternoonlabs/breeze/rev0/info.json → keyboards/afternoonlabs/breeze/rev0/keyboard.json

@@ -8,12 +8,19 @@
         "pid": "0x0001",
         "device_version": "0.0.0"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": false,
+        "console": true
+    },
     "matrix_pins": {
         "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
         "rows": ["F4", "F5", "F6", "F7", "B1"]
     },
     "diode_direction": "COL2ROW",
     "split": {
+        "enabled": true,
         "soft_serial_pin": "D2"
     },
     "bootmagic": {

keyboards/afternoonlabs/breeze/rev0/rules.mk

@@ -1,13 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = no        # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-SPLIT_KEYBOARD = yes

keyboards/afternoonlabs/breeze/rev1/info.json → keyboards/afternoonlabs/breeze/rev1/keyboard.json

@@ -8,12 +8,19 @@
         "pid": "0x0001",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": true
+    },
     "matrix_pins": {
         "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
         "rows": ["F4", "F5", "F6", "F7", "B1"]
     },
     "diode_direction": "COL2ROW",
     "split": {
+        "enabled": true,
         "soft_serial_pin": "D2"
     },
     "bootmagic": {

keyboards/afternoonlabs/breeze/rev1/rules.mk

@@ -1,13 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-SPLIT_KEYBOARD = yes
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output

keyboards/afternoonlabs/oceanbreeze/rev1/info.json → keyboards/afternoonlabs/oceanbreeze/rev1/keyboard.json

@@ -8,12 +8,19 @@
         "pid": "0x0003",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": true
+    },
     "matrix_pins": {
         "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
         "rows": ["F4", "F5", "F6", "F7", "B1", "B6"]
     },
     "diode_direction": "COL2ROW",
     "split": {
+        "enabled": true,
         "soft_serial_pin": "D2"
     },
     "bootmagic": {

keyboards/afternoonlabs/oceanbreeze/rev1/rules.mk

@@ -1,13 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-SPLIT_KEYBOARD = yes

keyboards/afternoonlabs/southern_breeze/rev1/info.json → keyboards/afternoonlabs/southern_breeze/rev1/keyboard.json

@@ -8,12 +8,19 @@
         "pid": "0x0005",
         "device_version": "0.0.1"
     },
+    "features": {
+        "bootmagic": true,
+        "mousekey": false,
+        "extrakey": false,
+        "console": true
+    },
     "matrix_pins": {
         "cols": ["B2", "D1", "D0", "D4", "C6", "D7", "E6", "B4", "B5"],
         "rows": ["F4", "F5", "F6", "F7", "B1"]
     },
     "diode_direction": "COL2ROW",
     "split": {
+        "enabled": true,
         "soft_serial_pin": "D2"
     },
     "bootmagic": {

keyboards/afternoonlabs/southern_breeze/rev1/rules.mk

@@ -1,13 +0,0 @@
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = no        # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-SPLIT_KEYBOARD = yes