Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Less/Rikki <86894501+lesshonor@users.noreply.github.com>pull/23153/merge
@ -0,0 +1,125 @@ | |||
{ | |||
"manufacturer": "DOIO", | |||
"keyboard_name": "KB3x-01", | |||
"maintainer": "DOIO2022", | |||
"bootloader": "stm32duino", | |||
"diode_direction": "COL2ROW", | |||
"dynamic_keymap": { | |||
"layer_count": 6 | |||
}, | |||
"encoder": { | |||
"rotary": [ | |||
{"pin_a": "B5", "pin_b": "B6", "resolution": 2}, | |||
{"pin_a": "A1", "pin_b": "A2", "resolution": 2}, | |||
{"pin_a": "A3", "pin_b": "A4", "resolution": 2} | |||
] | |||
}, | |||
"features": { | |||
"bootmagic": true, | |||
"encoder": true, | |||
"extrakey": true, | |||
"mousekey": true, | |||
"rgb_matrix": true | |||
}, | |||
"matrix_pins": { | |||
"cols": ["B14", "B13", "B12", "B0", "A7", "A6"], | |||
"rows": ["B3", "B4", "B9", "B8"] | |||
}, | |||
"processor": "STM32F103", | |||
"rgb_matrix": { | |||
"animations": { | |||
"alphas_mods": true, | |||
"band_pinwheel_sat": true, | |||
"band_pinwheel_val": true, | |||
"band_sat": true, | |||
"band_spiral_sat": true, | |||
"band_spiral_val": true, | |||
"band_val": true, | |||
"breathing": true, | |||
"cycle_all": true, | |||
"cycle_left_right": true, | |||
"cycle_out_in": true, | |||
"cycle_out_in_dual": true, | |||
"cycle_pinwheel": true, | |||
"cycle_spiral": true, | |||
"cycle_up_down": true, | |||
"digital_rain": true, | |||
"dual_beacon": true, | |||
"gradient_left_right": true, | |||
"gradient_up_down": true, | |||
"hue_breathing": true, | |||
"hue_pendulum": true, | |||
"hue_wave": true, | |||
"jellybean_raindrops": true, | |||
"multisplash": true, | |||
"pixel_flow": true, | |||
"pixel_fractal": true, | |||
"pixel_rain": true, | |||
"rainbow_beacon": true, | |||
"rainbow_moving_chevron": true, | |||
"rainbow_pinwheels": true, | |||
"raindrops": true, | |||
"solid_multisplash": true, | |||
"solid_reactive": true, | |||
"solid_reactive_cross": true, | |||
"solid_reactive_multicross": true, | |||
"solid_reactive_multinexus": true, | |||
"solid_reactive_multiwide": true, | |||
"solid_reactive_nexus": true, | |||
"solid_reactive_simple": true, | |||
"solid_reactive_wide": true, | |||
"solid_splash": true, | |||
"splash": true, | |||
"typing_heatmap": true | |||
}, | |||
"driver": "ws2812", | |||
"layout": [ | |||
{"matrix": [0, 0], "x": 0, "y": 0, "flags": 1}, | |||
{"matrix": [0, 1], "x": 75, "y": 0, "flags": 1}, | |||
{"matrix": [0, 2], "x": 149, "y": 0, "flags": 1}, | |||
{"matrix": [0, 3], "x": 224, "y": 0, "flags": 1}, | |||
{"x": 112, "y": 64, "flags": 1}, | |||
{"x": 112, "y": 64, "flags": 1}, | |||
{"x": 112, "y": 64, "flags": 1}, | |||
{"x": 112, "y": 64, "flags": 1} | |||
], | |||
"max_brightness": 200, | |||
"sleep": true | |||
}, | |||
"url": "", | |||
"usb": { | |||
"device_version": "0.0.1", | |||
"pid": "0x3F01", | |||
"vid": "0xD010" | |||
}, | |||
"ws2812": { | |||
"pin": "A10" | |||
}, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"matrix": [3, 0], "x": 0, "y": 0}, | |||
{"matrix": [3, 1], "x": 1, "y": 0}, | |||
{"matrix": [3, 2], "x": 2, "y": 0}, | |||
{"matrix": [3, 3], "x": 6.5, "y": 0}, | |||
{"matrix": [3, 4], "x": 7.5, "y": 0}, | |||
{"matrix": [3, 5], "x": 8.5, "y": 0}, | |||
{"matrix": [0, 0], "x": 1, "y": 1.25}, | |||
{"matrix": [1, 0], "x": 4.25, "y": 1.25}, | |||
{"matrix": [2, 0], "x": 7.5, "y": 1.25}, | |||
{"matrix": [0, 3], "x": 0, "y": 2.25}, | |||
{"matrix": [0, 4], "x": 1, "y": 2.25, "encoder": 0}, | |||
{"matrix": [0, 1], "x": 2, "y": 2.25}, | |||
{"matrix": [1, 3], "x": 3.25, "y": 2.25}, | |||
{"matrix": [1, 4], "x": 4.25, "y": 2.25, "encoder": 1}, | |||
{"matrix": [1, 1], "x": 5.25, "y": 2.25}, | |||
{"matrix": [2, 3], "x": 6.5, "y": 2.25}, | |||
{"matrix": [2, 4], "x": 7.5, "y": 2.25, "encoder": 2}, | |||
{"matrix": [2, 1], "x": 8.5, "y": 2.25}, | |||
{"matrix": [0, 2], "x": 1, "y": 3.25}, | |||
{"matrix": [1, 2], "x": 4.25, "y": 3.25}, | |||
{"matrix": [2, 2], "x": 7.5, "y": 3.25} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,51 @@ | |||
/* Copyright 2022 DOIO | |||
* Copyright 2022 DOIO2022 <https://github.com/DOIO2022> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layer_names { | |||
_LAY0, | |||
_LAY1, | |||
_LAY2 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_LAY0] = LAYOUT( | |||
TO(1), RGB_MOD, RGB_TOG, RGB_HUI, RGB_VAD, RGB_VAI, | |||
KC_MPLY, KC_UP, KC_UP, | |||
KC_MNXT, KC_TRNS, KC_MPRV, A(KC_LEFT), KC_TRNS, A(KC_RIGHT), KC_RIGHT, KC_TRNS, KC_LEFT, | |||
KC_MPLY, KC_DOWN, KC_DOWN), | |||
[_LAY1] = LAYOUT( | |||
TO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_WH_U, S(KC_RBRC), C(KC_L), | |||
C(KC_WH_D), KC_TRNS, C(KC_WH_U), KC_DOT, KC_TRNS, KC_COMM, C(KC_B), KC_TRNS, C(KC_U), | |||
KC_WH_D, S(KC_LBRC), C(KC_M)), | |||
[_LAY2] = LAYOUT( | |||
TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_B, KC_UP, S(KC_I), | |||
KC_P, KC_TRNS, KC_H, KC_RIGHT, KC_TRNS, KC_LEFT, KC_O, KC_TRNS, KC_I, | |||
KC_Y, KC_DOWN, S(KC_O)) | |||
}; | |||
#ifdef ENCODER_MAP_ENABLE | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[_LAY0] = { ENCODER_CCW_CW(C(KC_DOWN), C(KC_UP)), ENCODER_CCW_CW(C(KC_PMNS), C(KC_PPLS)), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[_LAY1] = { ENCODER_CCW_CW(C(KC_PMNS), C(KC_PPLS)), ENCODER_CCW_CW(KC_LBRC, KC_RBRC), ENCODER_CCW_CW(C(S(KC_U)), C(KC_I)) }, | |||
[_LAY2] = { ENCODER_CCW_CW(KC_C, KC_V), ENCODER_CCW_CW(KC_MINS, KC_EQL), ENCODER_CCW_CW(KC_J, KC_L) } | |||
}; | |||
#endif |
@ -0,0 +1 @@ | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,73 @@ | |||
/* Copyright 2022 DOIO | |||
* Copyright 2022 DOIO2022 <https://github.com/DOIO2022> | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum layer_names { | |||
_LAY0, | |||
_LAY1, | |||
_LAY2, | |||
_LAY3, | |||
_LAY4, | |||
_LAY5 | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_LAY0] = LAYOUT( | |||
TO(1), RGB_MOD, RGB_TOG, RGB_HUI, RGB_VAD, RGB_VAI, | |||
KC_MPLY, KC_UP, KC_UP, | |||
KC_MNXT, KC_TRNS, KC_MPRV, A(KC_LEFT), KC_TRNS, A(KC_RIGHT), KC_RIGHT, KC_TRNS, KC_LEFT, | |||
KC_MPLY, KC_DOWN, KC_DOWN), | |||
[_LAY1] = LAYOUT( | |||
TO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_WH_U, S(KC_RBRC), C(KC_L), | |||
C(KC_WH_D), KC_TRNS, C(KC_WH_U), KC_DOT, KC_TRNS, KC_COMM, C(KC_B), KC_TRNS, C(KC_U), | |||
KC_WH_D, S(KC_LBRC), C(KC_M)), | |||
[_LAY2] = LAYOUT( | |||
TO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_B, KC_UP, S(KC_I), | |||
KC_P, KC_TRNS, KC_H, KC_RIGHT, KC_TRNS, KC_LEFT, KC_O, KC_TRNS, KC_I, | |||
KC_Y, KC_DOWN, S(KC_O)), | |||
[_LAY3] = LAYOUT( | |||
TO(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS), | |||
[_LAY4] = LAYOUT( | |||
TO(5), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS), | |||
[_LAY5] = LAYOUT( | |||
TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS), | |||
}; | |||
#ifdef ENCODER_MAP_ENABLE | |||
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][NUM_DIRECTIONS] = { | |||
[_LAY0] = { ENCODER_CCW_CW(C(KC_DOWN), C(KC_UP)), ENCODER_CCW_CW(C(KC_PMNS), C(KC_PPLS)), ENCODER_CCW_CW(KC_VOLD, KC_VOLU) }, | |||
[_LAY1] = { ENCODER_CCW_CW(C(KC_PMNS), C(KC_PPLS)), ENCODER_CCW_CW(KC_LBRC, KC_RBRC), ENCODER_CCW_CW(C(S(KC_U)), C(KC_I)) }, | |||
[_LAY2] = { ENCODER_CCW_CW(KC_C, KC_V), ENCODER_CCW_CW(KC_MINS, KC_EQL), ENCODER_CCW_CW(KC_J, KC_L) }, | |||
[_LAY3] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, | |||
[_LAY4] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, | |||
[_LAY5] = { ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS), ENCODER_CCW_CW(KC_TRNS, KC_TRNS) }, | |||
}; | |||
#endif |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
ENCODER_MAP_ENABLE = yes |
@ -0,0 +1,26 @@ | |||
# doio/kb3x | |||
![kb3x-01](https://i.imgur.com/6DvIu9Mh.png) | |||
QMK for DOIO Knob keypad . | |||
* Keyboard Maintainer: DOIO2022 | |||
* Hardware Supported: DOIO Knob keypad | |||
Make example for this keyboard (after setting up your build environment): | |||
make doio/kb3x:default | |||
Flashing example for this keyboard: | |||
make doio/kb3x:default:flash | |||
See the build [environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). | |||
## Bootloader | |||
Enter the bootloader in 3 ways: | |||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard | |||
* **Physical reset button**: Briefly press the button on the back of the PCB | |||
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |
@ -0,0 +1 @@ | |||
# This file intentionally left blank |