* Add the OK60 keyboard * Fix ok60 incorrect ANSI keymap signature Add support for default ansi and iso 60 keymapspull/2505/head
@ -0,0 +1,84 @@ | |||
/* | |||
Copyright 2018 Edward Browncross | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#ifndef CONFIG_H | |||
#define CONFIG_H | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER OK60 | |||
#define PRODUCT OK60 | |||
#define DESCRIPTION qmk keyboard firmware for OK60 | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 5 | |||
#define MATRIX_COLS 15 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 } | |||
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 } | |||
#define UNUSED_PINS | |||
#define BACKLIGHT_PIN B7 | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* number of backlight levels */ | |||
#define BACKLIGHT_LEVELS 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* key combination for command */ | |||
#define IS_COMMAND() ( \ | |||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ | |||
) | |||
/* prevent stuck modifiers */ | |||
#define PREVENT_STUCK_MODIFIERS | |||
#define RGB_DI_PIN F6 | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLED_NUM 10 | |||
#define RGBLIGHT_HUE_STEP 8 | |||
#define RGBLIGHT_SAT_STEP 8 | |||
#define RGBLIGHT_VAL_STEP 8 | |||
#endif |
@ -0,0 +1,18 @@ | |||
#include "ok60.h" | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
KEYMAP_ANSI( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_MENU, KC_LCTL), | |||
KEYMAP_ANSI( | |||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||
KC_TRNS, RGB_TOG, KC_UP, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, | |||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), | |||
}; |
@ -0,0 +1,29 @@ | |||
#include "ok60.h" | |||
// An ISO UK keymap | |||
#define _______ KC_TRNS | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
KEYMAP_ISO( | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, | |||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, | |||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LGUI, KC_MENU, KC_LCTL), | |||
KEYMAP_ISO( | |||
KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, | |||
_______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, | |||
_______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, _______, KC_DEL, KC_END, KC_PGDN, KC_PSCR, | |||
_______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, | |||
_______, _______, _______, _______, _______, MO(2), _______, _______), | |||
KEYMAP_ISO( | |||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_F9, KC_F10, KC_F11, KC_F12, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, | |||
_______, _______, _______, _______, _______, _______, _______, _______), | |||
}; |
@ -0,0 +1 @@ | |||
#include "ok60.h" |
@ -0,0 +1,37 @@ | |||
#ifndef OK60_H | |||
#define OK60_H | |||
#include "quantum.h" | |||
#define KEYMAP_ANSI( \ | |||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \ | |||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ | |||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \ | |||
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ | |||
K400, K401, K402, K406, K410, K411, K412, K413 \ | |||
) { \ | |||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \ | |||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, KC_NO }, \ | |||
{ K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO }, \ | |||
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, KC_NO } \ | |||
} | |||
#define KEYMAP_ISO( \ | |||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \ | |||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, \ | |||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ | |||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ | |||
K400, K401, K402, K406, K410, K411, K412, K413 \ | |||
) { \ | |||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, KC_NO }, \ | |||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ | |||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO }, \ | |||
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, KC_NO } \ | |||
} | |||
#define LAYOUT_60_ansi KEYMAP_ANSI | |||
#define LAYOUT_60_iso KEYMAP_ISO | |||
#endif |
@ -0,0 +1,12 @@ | |||
/* Column pin configuration | |||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 | |||
* pin: D0 D1 D2 D3 D5 B6 C6 C7 F1 F0 E6 B3 B2 B1 B0 | |||
*/ | |||
/* Row pin configuration | |||
* row: 0 1 2 3 4 | |||
* pin: B5 B4 D7 D6 D4 | |||
*/ | |||
B7 LED backlight | |||
F6 WS2812 Strip |
@ -0,0 +1,16 @@ | |||
# OK60 | |||
![OK60](https://i.imgur.com/X1rISXS.png) | |||
A 60% keyboard PCB sold on AliExpress by Shenzhen YMD Tech Co.,Ltd. | |||
It supports the same layouts and cases as the GH60 but comes with WS2812 RGB underglow. | |||
Keyboard Maintainer: [Edward Browncross](https://github.com/edwardbrowncross) | |||
Hardware Supported: OK60 PCB, OK60XRGB, Diamond 60 Keyboard | |||
Hardware Availability: [AliExpress](https://www.aliexpress.com/store/product/Free-shipping-Pre-soldered-Diode-Resistance-Satan-GH60-PCB-Board-Programmable-DIY-Mechanical-Keyboard-Poker-2/429151_32809893696.html) | |||
Make example for this keyboard (after setting up your build environment): | |||
make ok60:default | |||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
@ -0,0 +1,66 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Boot Section Size in *bytes* | |||
# Teensy halfKay 512 | |||
# Teensy++ halfKay 1024 | |||
# Atmel DFU loader 4096 | |||
# LUFA bootloader 4096 | |||
# USBaspLoader 2048 | |||
OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |||
# Build Options | |||
# comment out to disable the options. | |||
# | |||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
# CONSOLE_ENABLE = yes # Console for debug(+400) | |||
# COMMAND_ENABLE = yes # Commands for debug and configuration | |||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key | |||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = yes # Enable the RGB backlight | |||
# MIDI_ENABLE = YES # MIDI controls | |||
# UNICODE_ENABLE = YES # Unicode | |||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID | |||
LAYOUTS = 60_ansi 60_iso |