Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>pull/13997/head
@ -0,0 +1,100 @@ | |||
/* | |||
Copyright 2021 Logan Butler | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x6060 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER MatchstickWorks | |||
#define PRODUCT SouthPad | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 4 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
* | |||
*/ | |||
#define MATRIX_ROW_PINS { B3, B5, B6, B7, C7, C6 } | |||
#define MATRIX_COL_PINS { B0, B1, B2, B4 } | |||
#define UNUSED_PINS | |||
/* COL2ROW, ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
//#define NO_ACTION_MACRO | |||
//#define NO_ACTION_FUNCTION | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,34 @@ | |||
{ | |||
"keyboard_name": "SouthPad", | |||
"url": "", | |||
"maintainer": "MatchstickWorks", | |||
"width": 4, | |||
"height": 6, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label":"K00 (B3,B0)", "x":0, "y":0}, | |||
{"label":"K01 (B3,B1)", "x":1, "y":0}, | |||
{"label":"K02 (B3,B2)", "x":2, "y":0}, | |||
{"label":"K03 (B3,B4)", "x":3, "y":0}, | |||
{"label":"K10 (B5,B0)", "x":0, "y":1}, | |||
{"label":"K11 (B5,B1)", "x":1, "y":1}, | |||
{"label":"K12 (B5,B2)", "x":2, "y":1}, | |||
{"label":"K13 (B5,B4)", "x":3, "y":1}, | |||
{"label":"K30 (B7,B0)", "x":0, "y":2, "h":2}, | |||
{"label":"K21 (B6,B1)", "x":1, "y":2}, | |||
{"label":"K22 (B6,B2)", "x":2, "y":2}, | |||
{"label":"K23 (B6,B4)", "x":3, "y":2}, | |||
{"label":"K31 (B7,B1)", "x":1, "y":3}, | |||
{"label":"K32 (B7,B2)", "x":2, "y":3}, | |||
{"label":"K33 (B7,B4)", "x":3, "y":3}, | |||
{"label":"K50 (C6,B0)", "x":0, "y":4, "h":2}, | |||
{"label":"K41 (C7,B1)", "x":1, "y":4}, | |||
{"label":"K42 (C7,B2)", "x":2, "y":4}, | |||
{"label":"K43 (C7,B4)", "x":3, "y":4}, | |||
{"label":"K51 (C6,B1)", "x":1, "y":5}, | |||
{"label":"K53 (C6,B4)", "x":2, "y":5, "w":2} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,27 @@ | |||
/* Copyright 2021 Logan Butler | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_numpad_6x4_southpaw( /* Base */ | |||
KC_BSPC, KC_EQL, KC_LPRN, KC_RPRN, | |||
KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, | |||
KC_P9, KC_P8, KC_P7, | |||
KC_PPLS, KC_P6, KC_P5, KC_P4, | |||
KC_P3, KC_P2, KC_P1, | |||
KC_PENT, KC_PDOT, KC_P0 | |||
), | |||
}; |
@ -0,0 +1,23 @@ | |||
# SouthPad | |||
![Southpad](https://i.imgur.com/Wl71thnh.jpg) | |||
This is a left-handed (or mirrored) numberpad with USB-C connections. | |||
Default layout is such: | |||
![SouthPad Layout](https://i.imgur.com/jc7T2jl.jpg) | |||
* Keyboard Maintainer: [Logan Butler](https://github.com/MatchstickWorks) | |||
* Hardware Supported: SouthPad PCB | |||
* Hardware Availability: Either via [my Etsy Store](https://www.etsy.com/shop/MatchstickWorksShop) or by messaging directly | |||
Getting the board into bootloader mode: | |||
In order to flash the firmware to this board, simply press the Reset button on the back of the PCB. You should head a USB disconnect and reconnect sound shortly following. | |||
Make example for this keyboard (after setting up your build environment): | |||
make matchstickworks/southpad:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,22 @@ | |||
# MCU name | |||
MCU = atmega32u2 | |||
# Bootloader selection | |||
BOOTLOADER = bootloadHID | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output |
@ -0,0 +1,16 @@ | |||
/* Copyright 2021 Logan Butler | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "southpad.h" |
@ -0,0 +1,44 @@ | |||
/* Copyright 2021 Logan Butler | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT_numpad_6x4_southpaw( \ | |||
k00, k01, k02, k03, \ | |||
k10, k11, k12, k13, \ | |||
k21, k22, k23, \ | |||
k20, k31, k32, k33, \ | |||
k41, k42, k43, \ | |||
k40, k51, k53 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03 }, \ | |||
{ k10, k11, k12, k13 }, \ | |||
{ k20, k21, k22, k23 }, \ | |||
{ KC_NO, k31, k32, k33 }, \ | |||
{ k40, k41, k42, k43 }, \ | |||
{ KC_NO, k51, KC_NO, k53 } \ | |||
} | |||