* Added WOW layer
* Initial commit for this branch. Still a work in progress.
* Added Rorschach keyboard layout.
* Simplified keymap
Removed the media layer to help simplify things. Also corrected some
keymap mistakes in the Qwerty and Colemak layers.
* Added ErgoTravel keymap.
* reverted to previous layout.
* Added Sol keyboard layout.
* Minor changes to keymap.
* more changes
* Added sol graphic by Kagerufu and Cardiactuna
* Added colemak layer because I can.
* more changes to sol layout
* Streamlined Sol layout
* minor tweaks to sol layout
* further revisions to sol keymap.
* Removing deprecated #include statements from my keymaps
* Standardizing keymap `include` lines.
* Minor change to keymap.
Swapped ESC with GRV on all alpha layers.
* Tweaks to Atreus62 Keymap
Added a layer for FPS RPG Loot Shooters.
* Fixed readme.md for Atreus keymap.
Replaced "Keymap" with "Layer" in illustrations for continuity's sake
* More readme.md clean-up
More clarification in the Atreus readme file.
* Next verse, same as the first.
* Changes to Sol layout
Bringing my Sol layout more in line with my other Orthos.
* Fixed keymap GUI.
Replaced left-hand "RGUI" with "LGUI" on all layers as it should be.
* Added ALPS64 keymap
* Formatting corrections
* fixes to config.h and keymap.c
* Fixed errors
This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h
and removes an stupid comma at the end of each LAYOUT stanza in
keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me.
* Fixed orthodox keymap config.h file
I hope this one fixes the problem. *sigh*
* Making suggested changes for PR#6192
Thanks to noroadsleft, fauxpark, and drashna. Still have
more work to do, but at least these suggestions have been applied.
* Fixing build errors
Travis has shown me the error of my ways...
* More fixes and corrections
Those pesky semicolons...
* More Fixes.
* Removing unneeded code snippet.
* fixed omitted semicolons
* Code updates to my keymaps
Updating the code for my Iris, Atreus62, and Atreus keymaps.
* Fixed Atreus62 Keymap
I forgot to add in the aliases for LOWER, RAISE, and ADJUST.
* Added userspace
Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro
* Fixing code that disables LEDs on ProMicros
Also tidied up my ErgoTravel keymap.
* Moving userspace to new branch
Moving my userspace to a new branch for the sake of keeping things
clean on the master branch.
* Added F13-F15 to Atreus62 Layout.
* Update readme.md.
* Updated Phantom keymap to current keymap standards
* Phantom keymap updates
Further updates - tidying and removing cruft.
Thank you zvecr on Discord for the help!
* Standards Updates
Bringing my Kinesis keymap up to current code standards
* Adding a readme
* Bring GH60 code to standard
* Utilizing layouts for 60_ansi and tkl_ansi
Moving my GH60 and Phantom keymaps into layouts/community/
* Alps64 layout removal
Removing my Alps64 keymap now that I've setup my 60_ansi layout.
* Moved Clueboard layout to community/66_ansi.
* Additions to 66_ansi config.h
* Bringing keymaps up to standard.
* More updates to keymaps.
* Syntax updates
* Revert "Syntax updates"
This reverts commit a892b2d9fc
.
* Moved WIP keymaps
Moved my WIP keymaps to my wip_keymaps branch to keep my master clean
* Updates requested by noroadsleft
* more changes per noroadsleft
More fixes as requested by noroadsleft. Further tidy-up and
standardization of my keymap code.
pull/6979/head
@ -1,3 +0,0 @@ | |||
#pragma once | |||
#define TAPPING_TERM 600 // ms |
@ -1,46 +0,0 @@ | |||
#---------------------------------------------------------------------------- | |||
# On command line: | |||
# | |||
# make all = Make software. | |||
# | |||
# make clean = Clean out built project files. | |||
# | |||
# make coff = Convert ELF to AVR COFF. | |||
# | |||
# make extcoff = Convert ELF to AVR Extended COFF. | |||
# | |||
# make program = Download the hex file to the device. | |||
# Please customize your programmer settings(PROGRAM_CMD) | |||
# | |||
# make teensy = Download the hex file to the device, using teensy_loader_cli. | |||
# (must have teensy_loader_cli installed). | |||
# | |||
# make dfu = Download the hex file to the device, using dfu-programmer (must | |||
# have dfu-programmer installed). | |||
# | |||
# make flip = Download the hex file to the device, using Atmel FLIP (must | |||
# have Atmel FLIP installed). | |||
# | |||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer | |||
# (must have dfu-programmer installed). | |||
# | |||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP | |||
# (must have Atmel FLIP installed). | |||
# | |||
# make debug = Start either simulavr or avarice as specified for debugging, | |||
# with avr-gdb or avr-insight as the front end for debugging. | |||
# | |||
# make filename.s = Just compile filename.c into the assembler code only. | |||
# | |||
# make filename.i = Create a preprocessed source file for use in submitting | |||
# bug reports to the GCC project. | |||
# | |||
# To rebuild project do "make clean" then "make all". | |||
#---------------------------------------------------------------------------- | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the makefile.mk in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. | |||
@ -1,84 +0,0 @@ | |||
#include QMK_KEYBOARD_H | |||
#include "action_layer.h" | |||
#include "eeconfig.h" | |||
extern keymap_config_t keymap_config; | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
#define _BASE 0 | |||
#define _FN1 1 | |||
#define _FN2 2 | |||
enum custom_keycodes { | |||
QWERTY = SAFE_RANGE, | |||
}; | |||
#define KC_ KC_TRNS | |||
#define KC_FN1 MO(_FN1) | |||
#define KC_FN2 MO(_FN2) | |||
#define KC_ESFN1 LT(_FN1, KC_ESC) | |||
#define KC_SPFN1 LT(_FN1, KC_SPACE) | |||
#define KC_SPFN2 LT(_FN2, KC_SPACE) | |||
#define KC_BSFN1 LT(_FN1, KC_BSPC) | |||
#define KC_BSFN2 LT(_FN2, KC_BSPC) | |||
#define KC_RST RESET | |||
#define KC_DBUG DEBUG | |||
#define KC_RTOG RGB_TOG | |||
#define KC_RMOD RGB_MOD | |||
#define KC_RHUI RGB_HUI | |||
#define KC_RHUD RGB_HUD | |||
#define KC_RSAI RGB_SAI | |||
#define KC_RSAD RGB_SAD | |||
#define KC_RVAI RGB_VAI | |||
#define KC_RVAD RGB_VAD | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT_kc( | |||
//,----+----+----+----+----+----|----+----+----+----+----+----+----. | |||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,SLSH,MINS, | |||
//|----`----`----`----`----`----|----`----`----`----`----`----`----| | |||
ESC , A , O , E , U , I , D , H , T , N , S , ENTER , | |||
//|-----`----`----`----`----`----|----`----`----`----`----`--------| | |||
LSFT ,SCLN, Q , J , K , X , B , M , W , V , Z , RSFT , | |||
//|-------`----`----`----`----`----|----`----`----`----`----`------| | |||
LCTL ,LALT,LGUI ,FN2 , BSPC , SPC , FN1 ,RGUI ,RALT , RCTL | |||
//`-----+----+-----+----+--------|--------+-----+-----+-----+------' | |||
), | |||
[_FN1] = LAYOUT_kc( | |||
//,----+----+----+----+----+----|----+----+----+----+----+----+----. | |||
GRV , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , | |||
//|----`----`----`----`----`----|----`----`----`----`----`----`----| | |||
CAPS ,RHUI,RSAI,RVAI,VOLU,LBRC,RBRC, , , ,SCLN, , | |||
//|-----`----`----`----`----`----|----`----`----`----`----`--------| | |||
RMOD ,RHUD,RSAD,RVAD,VOLD,LCBR,RCBR, , , , UP , , | |||
//|-------`----`----`----`----`----|----`----`----`----`----`------| | |||
RTOG , , , , DEL , INS , ,LEFT ,DOWN , RGHT | |||
//`-----+----+-----+----+--------|--------+-----+-----+-----+------' | |||
), | |||
[_FN2] = LAYOUT_kc( | |||
//,----+----+----+----+----+----|----+----+----+----+----+----+----. | |||
TILD,EXLM, AT ,HASH,DLR ,PERC,CIRC,AMPR,ASTR,LPRN,RPRN,UNDS,PLUS, | |||
//|----`----`----`----`----`----|----`----`----`----`----`----`----| | |||
CAPS , , ,INS ,PGUP,HOME, F1 , F2 , F3 , F4 , F5 , F6 , | |||
//|-----`----`----`----`----`----|----`----`----`----`----`--------| | |||
, , ,DEL ,PGDN,END , F7 , F8 , F9 ,F10 ,F11 , F12 , | |||
//|-------`----`----`----`----`----|----`----`----`----`----`------| | |||
, , , , DEL , INS , , , , | |||
//`-----+----+-----+----+--------|--------+-----+-----+-----+------' | |||
) | |||
}; | |||
void matrix_init_user(void) { | |||
// This will disable the red LEDs on the ProMicros | |||
DDRD &= ~(1<<5); | |||
PORTD &= ~(1<<5); | |||
DDRB &= ~(1<<0); | |||
PORTB &= ~(1<<0); | |||
}; | |||
@ -0,0 +1,330 @@ | |||
#include QMK_KEYBOARD_H | |||
#ifdef PROTOCOL_LUFA | |||
#include "lufa.h" | |||
#include "split_util.h" | |||
#endif | |||
#ifdef SSD1306OLED | |||
#include "common/ssd1306.h" | |||
#endif | |||
extern keymap_config_t keymap_config; | |||
#ifdef RGBLIGHT_ENABLE | |||
//Following line allows macro to read current RGB settings | |||
extern rgblight_config_t rgblight_config; | |||
#endif | |||
extern uint8_t is_master; | |||
// Each layer gets a name for readability, which is then used in the keymap matrix below. | |||
// The underscores don't mean anything - you can have a layer called STUFF or any other name. | |||
// Layer names don't all need to be of the same length, obviously, and you can also skip them | |||
// entirely and just use numbers. | |||
enum layer_number { | |||
_DVORAK = 0, | |||
_DESTINY, | |||
_QWERTY, | |||
_COLEMAK, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST | |||
}; | |||
enum custom_keycodes { | |||
DVORAK = SAFE_RANGE, | |||
DESTINY, | |||
QWERTY, | |||
COLEMAK, | |||
LOWER, | |||
RAISE, | |||
ADJUST, | |||
BACKLIT, | |||
RGBRST | |||
}; | |||
enum macro_keycodes { | |||
KC_SAMPLEMACRO, | |||
}; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_DVORAK] = LAYOUT( \ | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ | |||
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_END, KC_PGDN, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \ | |||
KC_RCTL, KC_A, KC_O, KC_E, KC_U, KC_I, XXXXXXX, XXXXXXX, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \ | |||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, XXXXXXX, XXXXXXX, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ | |||
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \ | |||
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \ | |||
), | |||
[_DESTINY] = LAYOUT( \ | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ | |||
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_END, KC_PGDN, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, \ | |||
KC_RCTL, KC_A, KC_O, KC_E, KC_U, KC_I, XXXXXXX, XXXXXXX, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, \ | |||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, XXXXXXX, XXXXXXX, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, \ | |||
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \ | |||
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \ | |||
), | |||
[_QWERTY] = LAYOUT( \ | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_END, KC_PGDN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_SLSH, \ | |||
KC_RCTL, KC_A, KC_S, KC_D, KC_F, KC_G, XXXXXXX, XXXXXXX, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, XXXXXXX, XXXXXXX, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ | |||
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \ | |||
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \ | |||
), | |||
[_COLEMAK] = LAYOUT( \ | |||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_HOME, KC_PGUP, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, \ | |||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_END, KC_PGDN, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_SLSH, \ | |||
KC_RCTL, KC_A, KC_R, KC_S, KC_T, KC_G, XXXXXXX, XXXXXXX, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, XXXXXXX, XXXXXXX, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ | |||
KC_GRV, KC_LGUI, KC_LEFT, KC_RGHT, LOWER, KC_LCTL, KC_LALT, KC_RALT, KC_RCTL, RAISE, KC_UP, KC_DOWN, KC_RGUI, KC_RCTL, \ | |||
KC_BSPC, KC_RGUI, KC_ENT, KC_SPC \ | |||
), | |||
[_LOWER] = LAYOUT( \ | |||
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, XXXXXXX, XXXXXXX, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ | |||
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
KC_DEL, _______, _______, KC_INS \ | |||
), | |||
[_RAISE] = LAYOUT( \ | |||
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
KC_CAPS, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, XXXXXXX, XXXXXXX, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ | |||
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
KC_DEL, _______, _______, KC_INS \ | |||
), | |||
/* ADJUST | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | F11 | F1 | F2 | F3 | F4 | F5 | RESET| | | F6 | F7 | F8 | F9 | F10 | F12 | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | |QWERTY|COLEMK|DVORAK|DESTNY| | | | | PrSc | ScLk | NmLk | | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | | Mute | Vol- | Vol+ | | | | |RGBTOG|RGBMOD| HUI | SAI | VAI | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | Prev | Play | Next | | | | | |RGBRMD| HUD | SAD | VAD | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | Home | End | | | | | | PgUp | PgDn | | | | | |||
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' | |||
* | Del | | | | Ins | | |||
* `-------------' `-------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( \ | |||
_______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_NLCK, _______, _______, \ | |||
KC_CAPS, _______, QWERTY, COLEMAK, DVORAK, DESTINY, XXXXXXX, XXXXXXX, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, \ | |||
_______, _______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, _______, \ | |||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ | |||
KC_DEL, _______, _______, KC_INS \ | |||
) | |||
}; | |||
// define variables for reactive RGB | |||
bool TOG_STATUS = false; | |||
int RGB_current_mode; | |||
// Setting ADJ layer RGB back to default | |||
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { | |||
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { | |||
#ifdef RGBLIGHT_ENABLE | |||
//rgblight_mode(RGB_current_mode); | |||
#endif | |||
layer_on(layer3); | |||
} else { | |||
layer_off(layer3); | |||
} | |||
} | |||
layer_state_t layer_state_set_user(layer_state_t state) { | |||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); | |||
} | |||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { | |||
switch (keycode) { | |||
case DVORAK: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_DVORAK); | |||
} | |||
return false; | |||
case COLEMAK: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_COLEMAK); | |||
} | |||
return false; | |||
case QWERTY: | |||
if (record->event.pressed) { | |||
set_single_persistent_default_layer(_QWERTY); | |||
} | |||
return false; | |||
/* | |||
Commenting this out since I removed the layer, but I want this in here for reference. | |||
case FN: | |||
if (record->event.pressed) { | |||
//not sure how to have keyboard check mode and set it to a variable, so my work around | |||
//uses another variable that would be set to true after the first time a reactive key is pressed. | |||
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false | |||
} else { | |||
TOG_STATUS = !TOG_STATUS; | |||
#ifdef RGBLIGHT_ENABLE | |||
//rgblight_mode(15); | |||
#endif | |||
} | |||
layer_on(_FN); | |||
} else { | |||
#ifdef RGBLIGHT_ENABLE | |||
//rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change | |||
#endif | |||
layer_off(_FN); | |||
TOG_STATUS = false; | |||
} | |||
return false; | |||
break; | |||
*/ | |||
case ADJUST: | |||
if (record->event.pressed) { | |||
layer_on(_ADJUST); | |||
} else { | |||
layer_off(_ADJUST); | |||
} | |||
return false; | |||
break; | |||
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released | |||
case RGBRST: | |||
#ifdef RGBLIGHT_ENABLE | |||
if (record->event.pressed) { | |||
eeconfig_update_rgblight_default(); | |||
rgblight_enable(); | |||
RGB_current_mode = rgblight_config.mode; | |||
} | |||
#endif | |||
break; | |||
} | |||
return true; | |||
} | |||
void matrix_init_user(void) { | |||
#ifdef RGBLIGHT_ENABLE | |||
RGB_current_mode = rgblight_config.mode; | |||
#endif | |||
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h | |||
#ifdef SSD1306OLED | |||
iota_gfx_init(!has_usb()); // turns on the display | |||
#endif | |||
} | |||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h | |||
#ifdef SSD1306OLED | |||
// hook point for 'led_test' keymap | |||
// 'default' keymap's led_test_init() is empty function, do nothing | |||
// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35); | |||
__attribute__ ((weak)) | |||
void led_test_init(void) {} | |||
void matrix_scan_user(void) { | |||
led_test_init(); | |||
iota_gfx_task(); // this is what updates the display continuously | |||
} | |||
void matrix_update(struct CharacterMatrix *dest, | |||
const struct CharacterMatrix *source) { | |||
if (memcmp(dest->display, source->display, sizeof(dest->display))) { | |||
memcpy(dest->display, source->display, sizeof(dest->display)); | |||
dest->dirty = true; | |||
} | |||
} | |||
//assign the right code to your layers for OLED display | |||
#define L_BASE 0 | |||
#define L_FN (1<<_FN) | |||
#define L_ADJ (1<<_ADJ) | |||
static void render_logo(struct CharacterMatrix *matrix) { | |||
static char logo[]={ | |||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, | |||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, | |||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, | |||
0}; | |||
matrix_write(matrix, logo); | |||
//matrix_write_P(&matrix, PSTR(" Split keyboard kit")); | |||
} | |||
void render_status(struct CharacterMatrix *matrix) { | |||
// Render to mode icon | |||
static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; | |||
if(keymap_config.swap_lalt_lgui==false){ | |||
matrix_write(matrix, logo[0][0]); | |||
matrix_write_P(matrix, PSTR("\n")); | |||
matrix_write(matrix, logo[0][1]); | |||
}else{ | |||
matrix_write(matrix, logo[1][0]); | |||
matrix_write_P(matrix, PSTR("\n")); | |||
matrix_write(matrix, logo[1][1]); | |||
} | |||
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below | |||
char buf[40]; | |||
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); | |||
matrix_write_P(matrix, PSTR("\nLayer: ")); | |||
switch (layer_state) { | |||
case L_BASE: | |||
matrix_write_P(matrix, PSTR("Default")); | |||
break; | |||
/* case L_FN: | |||
matrix_write_P(matrix, PSTR("FN")); | |||
break; */ | |||
case L_ADJ: | |||
/* case L_ADJ_TRI: */ | |||
matrix_write_P(matrix, PSTR("ADJ")); | |||
break; | |||
default: | |||
matrix_write(matrix, buf); | |||
} | |||
// Host Keyboard LED Status | |||
char led[40]; | |||
snprintf(led, sizeof(led), "\n%s %s %s", | |||
(IS_HOST_LED_ON(USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ", | |||
(IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) ? "CAPS" : " ", | |||
(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK)) ? "SCLK" : " "); | |||
matrix_write(matrix, led); | |||
} | |||
void iota_gfx_task_user(void) { | |||
struct CharacterMatrix matrix; | |||
#if DEBUG_TO_SCREEN | |||
if (debug_enable) { | |||
return; | |||
} | |||
#endif | |||
matrix_clear(&matrix); | |||
if(is_master){ | |||
render_status(&matrix); | |||
}else{ | |||
render_logo(&matrix); | |||
} | |||
matrix_update(&display, &matrix); | |||
} | |||
#endif |
@ -0,0 +1,132 @@ | |||
# Xyverz's Sol Layout | |||
## Layout | |||
### Base modifier layout | |||
``` | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | ESC | | | | | | - | | = | | | | | | \ | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | Tab | | | | | | [ | | ] | | | | | | / | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | Del | | | | | | | | | | | | | | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* |Shift | | | | | | | | | | | | | |Shift | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | Adj | Alt | ` | Left | Rght | Ctrl | Alt | | Alt | Ctrl | Up | Down | / | = | Adj | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' | |||
* | BkSp | Win | | Enter| Space| | |||
* `-------------' `-------------' | |||
``` | |||
### Qwerty alphas | |||
``` | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | Q | W | E | R | T | | | | Y | U | I | O | P | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | A | S | D | F | G | | | | H | J | K | L | ; | ' | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | Z | X | C | V | B | | | | N | M | , | . | / | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | |||
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' | |||
* | | | | | | | |||
* `-------------' `-------------' | |||
``` | |||
### Dvorak alphas | |||
``` | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | " | , | . | P | Y | | | | F | G | C | R | L | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | A | O | E | U | I | | | | D | H | T | N | S | - | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | ; | Q | J | K | X | | | | B | M | W | V | Z | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | |||
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' | |||
* | | | | | | | |||
* `-------------' `--------=----' | |||
``` | |||
### Colemak alphas | |||
``` | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | | | | | | | | | | | | | | | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | Q | W | F | P | B | | | | J | L | U | Y | ; | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | A | R | S | T | G | | | | K | N | E | I | O | ' | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | Z | X | C | D | V | | | | M | H | , | . | / | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | | | | | | | | | | | | | | |||
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' | |||
* | | | | | | | |||
* `-------------' `-------------' | |||
``` | |||
### Adjust (ADJ) | |||
``` | |||
* ,------------------------------------------------. ,------------------------------------------------. | |||
* | F11 | F1 | F2 | F3 | F4 | F5 | RESET| | | F6 | F7 | F8 | F9 | F10 | F12 | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | |QWERTY|DVORAK|COLEMK| | | | | | PrSc | ScLk | NmLk | | | | |||
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| | |||
* | | | Mute | Vol- | Vol+ | | | | |RGBTOG|RGBMOD| HUI | SAI | VAI | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | Prev | Play | Next | | | | | |RGBRMD| HUD | SAD | VAD | | | |||
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| | |||
* | | | | Home | End | | | | | | PgUp | PgDn | | | | | |||
* `------+------+------+------+------+------+------| |------+------+------+------+------+------+------' | |||
* | Del | | | | Ins | | |||
* `-------------' `-------------' | |||
``` | |||
## Customize | |||
see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` | |||
``` | |||
# Variables you can set for SOL | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = ne # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix | |||
LED_ANIMATIONS = yes # LED animations | |||
LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) | |||
RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight | |||
RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy | |||
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port | |||
UNICODE_ENABLE = no # Unicode | |||
SWAP_HANDS_ENABLE = no # Enable one-hand typing | |||
ENCODER_ENABLE_CUSTOM = yes # Enable rotary encoder | |||
OLED_ENABLE = yes # OLED_ENABLE | |||
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) | |||
``` | |||
## Compile | |||
go to qmk top directory. | |||
``` | |||
$ cd qmk_firmware | |||
``` | |||
build | |||
``` | |||
$ make sol:xyverz | |||
``` | |||
After the initial flash with AVRdudess, you should be able to flash using this: | |||
``` | |||
$ make sol:xyverz:flash | |||
``` |
@ -0,0 +1,51 @@ | |||
# Build Options | |||
# change to "no" to disable the options, or define them in the Makefile in | |||
# the appropriate keymap folder that will get included automatically | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = no # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = no # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix | |||
RGBLIGHT_ANIMATIONS = yes # LED animations | |||
LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) | |||
RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight | |||
RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy | |||
RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port | |||
UNICODE_ENABLE = no # Unicode | |||
SWAP_HANDS_ENABLE = no # Enable one-hand typing | |||
ENCODER_ENABLE_CUSTOM = no # Enable rotary encoder | |||
AUDIO_ENABLE = no | |||
OLED_ENABLE = yes # OLED_ENABLE | |||
IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) | |||
# Do not edit past here | |||
ifeq ($(strip $(OLED_ENABLE)), yes) | |||
OPT_DEFS += -DOLED_ENABLE | |||
endif | |||
ifeq ($(strip $(ENCODER_ENABLE_CUSTOM)), yes) | |||
OPT_DEFS += -DENCODER_ENABLE_CUSTOM | |||
SRC += common/knob_v2.c | |||
endif | |||
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) | |||
OPT_DEFS += -DIOS_DEVICE_ENABLE | |||
else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) | |||
OPT_DEFS += -DRGBLIGHT_FULL_POWER | |||
endif | |||
ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) | |||
OPT_DEFS += -DRGB_MATRIX_KEYPRESSES | |||
endif | |||
ifeq ($(strip $(LED_MIRRORED)), yes) | |||
OPT_DEFS += -DLED_MIRRORED | |||
endif |
@ -0,0 +1,5 @@ | |||
#pragma once | |||
#define TAPPING_TERM 600 // ms | |||
#undef RGBLIGHT_HUE_STEP | |||
#define RGBLIGHT_HUE_STEP 8 |
@ -0,0 +1 @@ | |||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. |
@ -0,0 +1 @@ | |||
2019-10-16 Updated to bring keymap up to current. |