Added new keyboard boardsource/3x4 (#9247)

* added bordsource 3x4 macro pad

* added bordsource 3x4 macro pad

* Update keyboards/boardsource/3x4/3x4.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/boardsource/3x4/3x4.c

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/boardsource/3x4/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/boardsource/3x4/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/boardsource/3x4/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update keyboards/boardsource/3x4/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* added link to readme

* Update keyboards/boardsource/3x4/keymaps/default/keymap.c

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>

keyboards/boardsource/3x4/3x4.c

@@ -0,0 +1 @@
+#include "3x4.h"

keyboards/boardsource/3x4/3x4.h

@@ -0,0 +1,12 @@
+#pragma once
+
+#include "quantum.h"
+#define LAYOUT( \
+    K00, K01, K02, K03,  \
+    K10, K11, K12, K13,  \
+    K20, K21, K22, K23 \
+    ) { \
+        {K00, K01, K02, K03}, \
+        {K10, K11, K12, K13}, \
+        {K20, K21, K22, K23} \
+    }

keyboards/boardsource/3x4/config.h

@@ -0,0 +1,144 @@
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xF7E0
+#define PRODUCT_ID      0x0412
+#define DEVICE_VER      0x0000
+#define MANUFACTURER    Boardsource
+#define PRODUCT         3x4
+#define DESCRIPTION     Little macro pad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 4
+
+#define MATRIX_ROW_PINS { F7, F6, F5,}
+#define MATRIX_COL_PINS {B6, B2, B3, B1}
+
+#define DIODE_DIRECTION COL2ROW
+
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/boardsource/3x4/info.json

@@ -0,0 +1,28 @@
+{
+    "keyboard_name": "boardsource 4x3",
+    "url": "https://boardsource.xyz",
+    "maintainer": "boardsource",
+    "width": 4,
+    "height": 3,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "K01", "x": 0, "y": 0 },
+                { "label": "K02", "x": 1, "y": 0 },
+                { "label": "K03", "x": 2, "y": 0 },
+
+                { "label": "K04", "x": 0, "y": 1 },
+                { "label": "K05", "x": 1, "y": 1 },
+                { "label": "K06", "x": 2, "y": 1 },
+
+                { "label": "K07", "x": 0, "y": 2 },
+                { "label": "K08", "x": 1, "y": 2 },
+                { "label": "K09", "x": 2, "y": 2 },
+
+                { "label": "K10", "x": 0, "y": 3 },
+                { "label": "K11", "x": 1, "y": 3 },
+                { "label": "K12", "x": 2, "y": 3 }
+            ]
+        }
+    }
+}

keyboards/boardsource/3x4/keymaps/default/keymap.c

@@ -0,0 +1,25 @@
+
+#include QMK_KEYBOARD_H
+
+#define _MAIN 0
+#define _RAISE 1
+#define _LOWER 2
+
+// Readability keycodes
+#define LOWER   MO(_LOWER)
+#define RAISE   MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MAIN] = LAYOUT(
+  KC_0,  KC_1,    KC_4,    KC_7, 
+  KC_ENT,  KC_2,    KC_5,    KC_8, 
+  RAISE,  KC_3,    KC_6,    KC_9
+  ),
+  [_RAISE] = LAYOUT(
+    _______, _______, _______, _______,
+    _______, _______, _______, _______,
+    _______, _______, _______, RESET
+  )
+
+};

keyboards/boardsource/3x4/readme.md

@@ -0,0 +1,14 @@
+# 3x4
+![Boardsource 3x4 macro](https://i.imgur.com/EiPF1hh.jpg)
+
+this macro pad / small 12 key was inspired by the plaid look
+
+* Keyboard Maintainer: [Boardsource](https://github.com/daysgobye)
+* Hardware Supported: 3x4 v1
+* Hardware Availability: [Boardsource store](https://boardsource.xyz/store/5ecc2008eee64242946c98c1)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make boardsource/3x4:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/boardsource/3x4/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches