@ -0,0 +1,54 @@ | |||
/* | |||
Copyright 2021 wuquestudio | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xB06B | |||
#define PRODUCT_ID 0x0005 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER wuque studio | |||
#define PRODUCT mammoth20x | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 6 | |||
#define MATRIX_COLS 4 | |||
#define MATRIX_ROW_PINS { D5, F0, F1, F4, F5, F6 } | |||
#define MATRIX_COL_PINS { B0, B1, E6, F7 } | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCE 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* Enable encoder */ | |||
#define ENCODERS_PAD_A { D3 } | |||
#define ENCODERS_PAD_B { D2 } | |||
#define ENCODERS 1 | |||
// Note: array is { col, row ) | |||
#define ENCODERS_CW_KEY { { 3, 2 } } | |||
#define ENCODERS_CCW_KEY { { 3, 4 } } |
@ -0,0 +1,41 @@ | |||
{ | |||
"keyboard_name": "mammoth20x", | |||
"url": "https://shop.wuquestudio.com/", | |||
"maintainer": "spbgzh", | |||
"width": 4, | |||
"height": 6, | |||
"layouts": { | |||
"LAYOUT_default": { | |||
"layout": [ | |||
{ "label": "Esc", "x": 0, "y": 0 }, | |||
{ "label": "Pause", "x": 1, "y": 0 }, | |||
{ "label": "Delete", "x": 2, "y": 0 }, | |||
{ "label": "E", "x": 3.5, "y": 0 }, | |||
{ "label": "Num", "x": 0, "y": 1 }, | |||
{ "label": "/", "x": 1, "y": 1 }, | |||
{ "label": "*", "x": 2, "y": 1 }, | |||
{ "label": "-", "x": 3, "y": 1 }, | |||
{ "label": "7", "x": 0, "y": 2 }, | |||
{ "label": "8", "x": 1, "y": 2 }, | |||
{ "label": "9", "x": 2, "y": 2 }, | |||
{ "label": "LeftEncode", "x": 3, "y": 0, "w": 0.5 }, | |||
{ "label": "4", "x": 0, "y": 3 }, | |||
{ "label": "5", "x": 1, "y": 3 }, | |||
{ "label": "6", "x": 2, "y": 3 }, | |||
{ "label": "+", "x": 3, "y": 2, "h": 2 }, | |||
{ "label": "1", "x": 0, "y": 4 }, | |||
{ "label": "2", "x": 1, "y": 4 }, | |||
{ "label": "3", "x": 2, "y": 4 }, | |||
{ "label": "RightEncode", "x": 4.5, "y": 0, "w" : 0.25 }, | |||
{ "label": "0", "x": 0, "y": 5, "w": 2 }, | |||
{ "label": ".", "x": 2, "y": 5 }, | |||
{ "label": "Enter", "x": 3, "y": 4,"h":2 } | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,36 @@ | |||
/* Copyright 2021 wuquestudio | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_default( | |||
KC_ESC, KC_PAUS, KC_DEL, KC_MUTE, | |||
KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, KC_VOLU, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_VOLD, | |||
KC_P0, KC_PDOT, KC_PENT | |||
), | |||
[1] = LAYOUT_default( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for mammoth20x |
@ -0,0 +1,52 @@ | |||
/* Copyright 2021 wuquestudio | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[0] = LAYOUT_default( | |||
KC_ESC, KC_PAUS, KC_DEL, KC_MUTE, | |||
KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, | |||
KC_P7, KC_P8, KC_P9, KC_VOLU, | |||
KC_P4, KC_P5, KC_P6, KC_PPLS, | |||
KC_P1, KC_P2, KC_P3, KC_VOLD, | |||
KC_P0, KC_PDOT, KC_PENT | |||
), | |||
[1] = LAYOUT_default( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______ | |||
), | |||
[2] = LAYOUT_default( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______ | |||
), | |||
[3] = LAYOUT_default( | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______, _______, | |||
_______, _______, _______ | |||
), | |||
}; |
@ -0,0 +1 @@ | |||
# The via keymap for mammoth20x |
@ -0,0 +1,2 @@ | |||
VIA_ENABLE = yes | |||
LTO_ENABLE = yes |
@ -0,0 +1,59 @@ | |||
/* Copyright 2021 wuquestudio | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "mammoth20x.h" | |||
static uint8_t encoder_state[ENCODERS] = {0}; | |||
static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; | |||
static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; | |||
void encoder_action_unregister(void) | |||
{ | |||
for (int index = 0; index < ENCODERS; ++index) | |||
{ | |||
if (encoder_state[index]) | |||
{ | |||
keyevent_t encoder_event = (keyevent_t){ | |||
.key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], | |||
.pressed = false, | |||
.time = (timer_read() | 1)}; | |||
encoder_state[index] = 0; | |||
action_exec(encoder_event); | |||
} | |||
} | |||
} | |||
void encoder_action_register(uint8_t index, bool clockwise) | |||
{ | |||
keyevent_t encoder_event = (keyevent_t){ | |||
.key = clockwise ? encoder_cw[index] : encoder_ccw[index], | |||
.pressed = true, | |||
.time = (timer_read() | 1)}; | |||
encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); | |||
action_exec(encoder_event); | |||
} | |||
void matrix_scan_kb(void) | |||
{ | |||
encoder_action_unregister(); | |||
matrix_scan_user(); | |||
} | |||
bool encoder_update_kb(uint8_t index, bool clockwise) | |||
{ | |||
encoder_action_register(index, clockwise); | |||
return true; | |||
}; |
@ -0,0 +1,36 @@ | |||
/* Copyright 2021 wuquestudio | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
#define LAYOUT_default( \ | |||
K00, K01, K02, K03, \ | |||
K10, K11, K12, K13, \ | |||
K20, K21, K22, K23, \ | |||
K30, K31, K32, K33, \ | |||
K40, K41, K42, K43, \ | |||
K50, K52, K53 \ | |||
) { \ | |||
{ K00, K01, K02, K03 }, \ | |||
{ K10, K11, K12, K13 }, \ | |||
{ K20, K21, K22, K23 }, \ | |||
{ K30, K31, K32, K33 }, \ | |||
{ K40, K41, K42, K43 }, \ | |||
{ K50, KC_NO, K52, K53 }, \ | |||
} | |||
@ -0,0 +1,22 @@ | |||
# mammoth20x | |||
| |||
More Info at[wuquestudio](https://shop.wuquestudio.com/). | |||
| |||
* Keyboard Maintainer: [spbgzh](https://github.com/spbgzh) | |||
* Hardware Supported: mammoth20x Standard | |||
* Hardware Availability: [mammoth20x](https://shop.wuquestudio.com/) | |||
| |||
Make example for this keyboard (after setting up your build environment): | |||
make wuque/mammoth20x:default | |||
Flashing example for this keyboard: | |||
make wuque/mammoth20x:default:flash | |||
To reset the board into bootloader mode, do one of the following: | |||
* Tap the Reset switch mounted on the PCB | |||
* Hold the Esc key while connecting the USB cable (also erases persistent settings) | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,24 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Bootloader selection | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = no # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth | |||
AUDIO_ENABLE = no # Audio output | |||
ENCODER_ENABLE = yes # Enable Encoder | |||