Add support for Dimple, a 40% custom keyboard designed and produced by LazyDesigners.pull/5972/head
@ -0,0 +1,66 @@ | |||
/* | |||
Copyright 2019 Erovia | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xFEED | |||
#define PRODUCT_ID 0x0040 | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER LazyDesigners | |||
#define PRODUCT Dimple | |||
#define DESCRIPTION A 40% keyboard | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 4 | |||
#define MATRIX_COLS 12 | |||
/* key matrix pins */ | |||
#define MATRIX_ROW_PINS { D0, D1, D2, D3 } | |||
#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7 } | |||
#define UNUSED_PINS | |||
/* COL2ROW or ROW2COL */ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* Set 0 if debouncing isn't needed */ | |||
#define DEBOUNCING_DELAY 5 | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* RBG underglow */ | |||
#define RGB_DI_PIN B7 | |||
#ifdef RGB_DI_PIN | |||
#define RGBLIGHT_ANIMATIONS | |||
#define RGBLIGHT_SLEEP | |||
#define RGBLED_NUM 50 | |||
/* #define RGBLIGHT_HUE_STEP 8 */ | |||
/* #define RGBLIGHT_SAT_STEP 8 */ | |||
/* #define RGBLIGHT_VAL_STEP 8 */ | |||
#endif | |||
/* CapsLock LED */ | |||
#define BACKLIGHT_PIN E6 | |||
#ifdef BACKLIGHT_PIN | |||
#define BACKLIGHT_LEVELS 6 | |||
#endif |
@ -0,0 +1,24 @@ | |||
/* Copyright 2019 Erovia | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include "dimple.h" | |||
void dimple_led_on() { | |||
DDRE |= (1 << 6); PORTE &= ~(1 << 6); | |||
} | |||
void dimple_led_off() { | |||
DDRE &= ~(1 << 6); PORTE &= ~(1 << 6); | |||
} |
@ -0,0 +1,46 @@ | |||
/* Copyright 2019 Erovia | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* | |||
* ,---------------------------------------------------------------. | |||
* | | | | | | | | | | | | | | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | | | | | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | | | | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | |||
* `-----------------------------------------------------' | |||
*/ | |||
#define LAYOUT( \ | |||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ | |||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ | |||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, \ | |||
K300, K302, K303, K304, K306, K307, K308, K309 \ | |||
) { \ | |||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ | |||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ | |||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, KC_NO }, \ | |||
{ K300, KC_NO, K302, K303, K304, KC_NO, K306, K307, K308, K309, KC_NO, KC_NO } \ | |||
} | |||
void dimple_led_on(void); | |||
void dimple_led_off(void); |
@ -0,0 +1,56 @@ | |||
{ | |||
"keyboard_name": "Dimple", | |||
"url": "http://lazydesigners.cn", | |||
"maintainer": "Erovia", | |||
"width": 12.5, | |||
"height": 4, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [ | |||
{"label":"Esc", "x":0, "y":0}, | |||
{"label":"Q", "x":1, "y":0}, | |||
{"label":"W", "x":2, "y":0}, | |||
{"label":"E", "x":3, "y":0}, | |||
{"label":"R", "x":4, "y":0}, | |||
{"label":"T", "x":5, "y":0}, | |||
{"label":"Y", "x":6, "y":0}, | |||
{"label":"U", "x":7, "y":0}, | |||
{"label":"I", "x":8, "y":0}, | |||
{"label":"O", "x":9, "y":0}, | |||
{"label":"P", "x":10, "y":0}, | |||
{"label":"Back<br>Space", "x":11, "y":0, "w":1.5}, | |||
{"label":"Tab", "x":0, "y":1, "w":1.25}, | |||
{"label":"A", "x":1.25, "y":1}, | |||
{"label":"S", "x":2.25, "y":1}, | |||
{"label":"D", "x":3.25, "y":1}, | |||
{"label":"F", "x":4.25, "y":1}, | |||
{"label":"G", "x":5.25, "y":1}, | |||
{"label":"H", "x":6.25, "y":1}, | |||
{"label":"J", "x":7.25, "y":1}, | |||
{"label":"K", "x":8.25, "y":1}, | |||
{"label":"L", "x":9.25, "y":1}, | |||
{"label":"'", "x":10.25, "y":1}, | |||
{"label":"Enter", "x":11.25, "y":1, "w":1.25}, | |||
{"label":"Shift", "x":0, "y":2, "w":1.75}, | |||
{"label":"Z", "x":1.75, "y":2}, | |||
{"label":"X", "x":2.75, "y":2}, | |||
{"label":"C", "x":3.75, "y":2}, | |||
{"label":"V", "x":4.75, "y":2}, | |||
{"label":"B", "x":5.75, "y":2}, | |||
{"label":"N", "x":6.75, "y":2}, | |||
{"label":"M", "x":7.75, "y":2}, | |||
{"label":",", "x":8.75, "y":2}, | |||
{"label":"Up", "x":9.75, "y":2}, | |||
{"label":".", "x":10.75, "y":2, "w":1.75}, | |||
{"label":"Ctrl", "x":0.75, "y":3}, | |||
{"label":"Gui", "x":1.75, "y":3}, | |||
{"label":"Alt", "x":2.75, "y":3}, | |||
{"label":"Space", "x":3.75, "y":3, "w":2.25}, | |||
{"label":"Space", "x":6, "y":3, "w":2.75}, | |||
{"label":"Left", "x":8.75, "y":3}, | |||
{"label":"Down", "x":9.75, "y":3}, | |||
{"label":"Right", "x":10.75, "y":3} | |||
] | |||
} | |||
} | |||
} |
@ -0,0 +1,136 @@ | |||
/* Copyright 2019 Erovia | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
enum custom_layers { | |||
_QWERTY, | |||
_LOWER, | |||
_RAISE, | |||
_ADJUST | |||
}; | |||
// Act as Shift on hold and as CapsLock on tap | |||
#define SFT_CPS LSFT_T(KC_CAPS) | |||
// Left space on tap, LOWER on hold | |||
#define SPC_LOW LT(_LOWER, KC_SPC) | |||
// Left space on tap, UPPER on hold | |||
#define SPC_UPR LT(_RAISE, KC_SPC) | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
/* | |||
* ,---------------------------------------------------------------. | |||
* |Esc | Q | W | E | R | T | Y | U | I | O | P | Bspc | | |||
* |---------------------------------------------------------------| | |||
* | Tab | A | S | D | F | G | H | J | K | L | ' |Enter | | |||
* |---------------------------------------------------------------| | |||
* | Shift | Z | X | C | V | B | N | M | , | Up | . | | |||
* |---------------------------------------------------------------| | |||
* |Ctrl|Gui |Alt | Spc/Lwr | Spc/Rse |Left|Down|Rght| | |||
* `-----------------------------------------------------' | |||
*/ | |||
[_QWERTY] = LAYOUT( | |||
KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, | |||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, | |||
SFT_CPS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_UP, KC_DOT, | |||
KC_LCTL, KC_LGUI, KC_LALT, SPC_LOW, SPC_UPR, KC_LEFT, KC_DOWN, KC_RGHT | |||
), | |||
/* | |||
* ,---------------------------------------------------------------. | |||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | |||
* |---------------------------------------------------------------| | |||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | |||
* |---------------------------------------------------------------| | |||
* | | F7 | F8 | F9 |F10 |F11 |F12 | | ; |PgUp| / | | |||
* |---------------------------------------------------------------| | |||
* | | | | | |Home|PgDn|End | | |||
* `-----------------------------------------------------' | |||
*/ | |||
[_LOWER] = LAYOUT( | |||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_NO, | |||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, | |||
KC_NO, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_SCLN, KC_PGUP, KC_SLSH, | |||
KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END | |||
), | |||
/* | |||
* ,---------------------------------------------------------------. | |||
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | |||
* |---------------------------------------------------------------| | |||
* | Ins | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | | |||
* |---------------------------------------------------------------| | |||
* | | F7 | F8 | F9 |F10 |F11 |F12 | | | | | | |||
* |---------------------------------------------------------------| | |||
* |VolD|Mute|VolU| | | | | | | |||
* `-----------------------------------------------------' | |||
*/ | |||
[_RAISE] = LAYOUT( | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, | |||
KC_INS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_NO, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, | |||
KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO | |||
), | |||
/* | |||
* ,---------------------------------------------------------------. | |||
* |EEPR|RST | | | | | | | | | | | | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | | | | | |||
* |---------------------------------------------------------------| | |||
* | | | | | | | | | | | | | |||
* |---------------------------------------------------------------| | |||
* |RGB-|RGB |RGB+| | | | | | | |||
* `-----------------------------------------------------' | |||
*/ | |||
[_ADJUST] = LAYOUT( | |||
EEP_RST, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, | |||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, | |||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, | |||
RGB_VAD, RGB_TOG, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO | |||
), | |||
}; | |||
void led_set_user(uint8_t usb_led) { | |||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { | |||
dimple_led_on(); | |||
} else { | |||
dimple_led_off(); | |||
} | |||
} | |||
uint32_t layer_state_set_user(uint32_t state) { | |||
state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); | |||
switch (biton32(state)) { | |||
case _LOWER: | |||
rgblight_sethsv_noeeprom(HSV_GREEN); | |||
break; | |||
case _RAISE: | |||
rgblight_sethsv_noeeprom(HSV_GOLD); | |||
break; | |||
case _ADJUST: | |||
rgblight_sethsv_noeeprom(HSV_RED); | |||
break; | |||
default: | |||
rgblight_sethsv_noeeprom(HSV_WHITE); | |||
break; | |||
} | |||
return state; | |||
} |
@ -0,0 +1,60 @@ | |||
# The default keymap for Dimple | |||
**Features** | |||
* Shift acts as CapsLock when tapped | |||
* Left space: space on tap, Lower layer on hold | |||
* Right space: space on tap, Raise layer on hold | |||
* Both space: Adjust layer on hold | |||
## QWERTY (Normal) Layer | |||
``` | |||
,---------------------------------------------------------------. | |||
|Esc | Q | W | E | R | T | Y | U | I | O | P | Bspc | | |||
|---------------------------------------------------------------| | |||
| Tab | A | S | D | F | G | H | J | K | L | ' |Enter | | |||
|---------------------------------------------------------------| | |||
| Shift | Z | X | C | V | B | N | M | , | Up | . | | |||
|---------------------------------------------------------------| | |||
|Ctrl|Gui |Alt | Spc/Lwr | Spc/Rse |Left|Down|Rght| | |||
`-----------------------------------------------------' | |||
``` | |||
## Lower Layer | |||
``` | |||
,---------------------------------------------------------------. | |||
| ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | |||
|---------------------------------------------------------------| | |||
| Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | |||
|---------------------------------------------------------------| | |||
| | F7 | F8 | F9 |F10 |F11 |F12 | | ; |PgUp| / | | |||
|---------------------------------------------------------------| | |||
| | | | | |Home|PgDn|End | | |||
`-----------------------------------------------------' | |||
``` | |||
## Raise Layer | |||
``` | |||
,---------------------------------------------------------------. | |||
| ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | | |||
|---------------------------------------------------------------| | |||
| Ins | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | | |||
|---------------------------------------------------------------| | |||
| | F7 | F8 | F9 |F10 |F11 |F12 | | | | | | |||
|---------------------------------------------------------------| | |||
|VolD|Mute|VolU| | | | | | | |||
`-----------------------------------------------------' | |||
``` | |||
## Adjust Layer | |||
``` | |||
,---------------------------------------------------------------. | |||
|EEPR|RST | | | | | | | | | | | | |||
|---------------------------------------------------------------| | |||
| | | | | | | | | | | | | | |||
|---------------------------------------------------------------| | |||
| | | | | | | | | | | | | |||
|---------------------------------------------------------------| | |||
|RGB-|RGB |RGB+| | | | | | | |||
`-----------------------------------------------------' | |||
``` |
@ -0,0 +1,17 @@ | |||
# Dimple | |||
![dimple](https://i.loli.net/2019/03/29/5c9daf903cad9.jpg) | |||
A 40% custom keyboard designed and produced by [LazyDesigners](http://lazydesigners.cn). | |||
Keyboard Maintainer: [Erovia](https://github.com/Erovia) | |||
Hardware Supported: Dimple | |||
Hardware Availability: Check for GBs on [Geekhack](https://geekhack.org) and on [LazyDesigner's homepage.](http://lazydesigners.cn) | |||
Make example for this keyboard (after setting up your build environment): | |||
make lazydesigners/dimple:default:dfu | |||
To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer. | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,58 @@ | |||
# MCU name | |||
MCU = atmega32u4 | |||
# Processor frequency. | |||
# This will define a symbol, F_CPU, in all source code files equal to the | |||
# processor frequency in Hz. You can then use this symbol in your source code to | |||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done | |||
# automatically to create a 32-bit value in your source code. | |||
# | |||
# This will be an integer division of F_USB below, as it is sourced by | |||
# F_USB after it has run through any CPU prescalers. Note that this value | |||
# does not *change* the processor frequency - it should merely be updated to | |||
# reflect the processor speed set externally so that the code can use accurate | |||
# software delays. | |||
F_CPU = 16000000 | |||
# | |||
# LUFA specific | |||
# | |||
# Target architecture (see library "Board Types" documentation). | |||
ARCH = AVR8 | |||
# Input clock frequency. | |||
# This will define a symbol, F_USB, in all source code files equal to the | |||
# input clock frequency (before any prescaling is performed) in Hz. This value may | |||
# differ from F_CPU if prescaling is used on the latter, and is required as the | |||
# raw input clock is fed directly to the PLL sections of the AVR for high speed | |||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |||
# at the end, this will be done automatically to create a 32-bit value in your | |||
# source code. | |||
# | |||
# If no clock division is performed on the input clock inside the AVR (via the | |||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |||
F_USB = $(F_CPU) | |||
# Interrupt driven control endpoint task(+60) | |||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |||
# Bootloader selection | |||
# Teensy halfkay | |||
# Pro Micro caterina | |||
# Atmel DFU atmel-dfu | |||
# LUFA DFU lufa-dfu | |||
# QMK DFU qmk-dfu | |||
# atmega32a bootloadHID | |||
BOOTLOADER = atmel-dfu | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) | |||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |||
NKRO_ENABLE = yes # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default | |||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow |