Includes info.json for custom layout and a minimal default keymap.pull/9130/head
@ -0,0 +1,700 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file rt/templates/chconf.h | |||
* @brief Configuration file template. | |||
* @details A copy of this file must be placed in each project directory, it | |||
* contains the application specific kernel settings. | |||
* | |||
* @addtogroup config | |||
* @details Kernel related settings and hooks. | |||
* @{ | |||
*/ | |||
#ifndef CHCONF_H | |||
# define CHCONF_H | |||
# define _CHIBIOS_RT_CONF_ | |||
# define _CHIBIOS_RT_CONF_VER_6_0_ | |||
/*===========================================================================*/ | |||
/** | |||
* @name System timers settings | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System time counter resolution. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
# if !defined(CH_CFG_ST_RESOLUTION) | |||
# define CH_CFG_ST_RESOLUTION 32 | |||
# endif | |||
/** | |||
* @brief System tick frequency. | |||
* @details Frequency of the system timer that drives the system ticks. This | |||
* setting also defines the system tick time unit. | |||
*/ | |||
# if !defined(CH_CFG_ST_FREQUENCY) | |||
# define CH_CFG_ST_FREQUENCY 1000 | |||
# endif | |||
/** | |||
* @brief Time intervals data size. | |||
* @note Allowed values are 16, 32 or 64 bits. | |||
*/ | |||
# if !defined(CH_CFG_INTERVALS_SIZE) | |||
# define CH_CFG_INTERVALS_SIZE 32 | |||
# endif | |||
/** | |||
* @brief Time types data size. | |||
* @note Allowed values are 16 or 32 bits. | |||
*/ | |||
# if !defined(CH_CFG_TIME_TYPES_SIZE) | |||
# define CH_CFG_TIME_TYPES_SIZE 32 | |||
# endif | |||
/** | |||
* @brief Time delta constant for the tick-less mode. | |||
* @note If this value is zero then the system uses the classic | |||
* periodic tick. This value represents the minimum number | |||
* of ticks that is safe to specify in a timeout directive. | |||
* The value one is not valid, timeouts are rounded up to | |||
* this value. | |||
*/ | |||
# if !defined(CH_CFG_ST_TIMEDELTA) | |||
# define CH_CFG_ST_TIMEDELTA 0 | |||
# endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel parameters and options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Round robin interval. | |||
* @details This constant is the number of system ticks allowed for the | |||
* threads before preemption occurs. Setting this value to zero | |||
* disables the preemption for threads with equal priority and the | |||
* round robin becomes cooperative. Note that higher priority | |||
* threads can still preempt, the kernel is always preemptive. | |||
* @note Disabling the round robin preemption makes the kernel more compact | |||
* and generally faster. | |||
* @note The round robin preemption is not supported in tickless mode and | |||
* must be set to zero in that case. | |||
*/ | |||
# if !defined(CH_CFG_TIME_QUANTUM) | |||
# define CH_CFG_TIME_QUANTUM 20 | |||
# endif | |||
/** | |||
* @brief Managed RAM size. | |||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||
* then the whole available RAM is used. The core memory is made | |||
* available to the heap allocator and/or can be used directly through | |||
* the simplified core memory allocator. | |||
* | |||
* @note In order to let the OS manage the whole RAM the linker script must | |||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||
*/ | |||
# if !defined(CH_CFG_MEMCORE_SIZE) | |||
# define CH_CFG_MEMCORE_SIZE 0 | |||
# endif | |||
/** | |||
* @brief Idle thread automatic spawn suppression. | |||
* @details When this option is activated the function @p chSysInit() | |||
* does not spawn the idle thread. The application @p main() | |||
* function becomes the idle thread and must implement an | |||
* infinite loop. | |||
*/ | |||
# if !defined(CH_CFG_NO_IDLE_THREAD) | |||
# define CH_CFG_NO_IDLE_THREAD FALSE | |||
# endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Performance options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief OS optimization. | |||
* @details If enabled then time efficient rather than space efficient code | |||
* is used when two possible implementations exist. | |||
* | |||
* @note This is not related to the compiler optimization options. | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_OPTIMIZE_SPEED) | |||
# define CH_CFG_OPTIMIZE_SPEED TRUE | |||
# endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Subsystem options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Time Measurement APIs. | |||
* @details If enabled then the time measurement APIs are included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_TM) | |||
# define CH_CFG_USE_TM FALSE | |||
# endif | |||
/** | |||
* @brief Threads registry APIs. | |||
* @details If enabled then the registry APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_REGISTRY) | |||
# define CH_CFG_USE_REGISTRY TRUE | |||
# endif | |||
/** | |||
* @brief Threads synchronization APIs. | |||
* @details If enabled then the @p chThdWait() function is included in | |||
* the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_WAITEXIT) | |||
# define CH_CFG_USE_WAITEXIT TRUE | |||
# endif | |||
/** | |||
* @brief Semaphores APIs. | |||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_SEMAPHORES) | |||
# define CH_CFG_USE_SEMAPHORES TRUE | |||
# endif | |||
/** | |||
* @brief Semaphores queuing mode. | |||
* @details If enabled then the threads are enqueued on semaphores by | |||
* priority rather than in FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) | |||
# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||
# endif | |||
/** | |||
* @brief Mutexes APIs. | |||
* @details If enabled then the mutexes APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_MUTEXES) | |||
# define CH_CFG_USE_MUTEXES TRUE | |||
# endif | |||
/** | |||
* @brief Enables recursive behavior on mutexes. | |||
* @note Recursive mutexes are heavier and have an increased | |||
* memory footprint. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) | |||
# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||
# endif | |||
/** | |||
* @brief Conditional Variables APIs. | |||
* @details If enabled then the conditional variables APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||
*/ | |||
# if !defined(CH_CFG_USE_CONDVARS) | |||
# define CH_CFG_USE_CONDVARS TRUE | |||
# endif | |||
/** | |||
* @brief Conditional Variables APIs with timeout. | |||
* @details If enabled then the conditional variables APIs with timeout | |||
* specification are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||
*/ | |||
# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) | |||
# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE | |||
# endif | |||
/** | |||
* @brief Events Flags APIs. | |||
* @details If enabled then the event flags APIs are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_EVENTS) | |||
# define CH_CFG_USE_EVENTS TRUE | |||
# endif | |||
/** | |||
* @brief Events Flags APIs with timeout. | |||
* @details If enabled then the events APIs with timeout specification | |||
* are included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_EVENTS. | |||
*/ | |||
# if !defined(CH_CFG_USE_EVENTS_TIMEOUT) | |||
# define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||
# endif | |||
/** | |||
* @brief Synchronous Messages APIs. | |||
* @details If enabled then the synchronous messages APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_MESSAGES) | |||
# define CH_CFG_USE_MESSAGES TRUE | |||
# endif | |||
/** | |||
* @brief Synchronous Messages queuing mode. | |||
* @details If enabled then messages are served by priority rather than in | |||
* FIFO order. | |||
* | |||
* @note The default is @p FALSE. Enable this if you have special | |||
* requirements. | |||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||
*/ | |||
# if !defined(CH_CFG_USE_MESSAGES_PRIORITY) | |||
# define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||
# endif | |||
/** | |||
* @brief Mailboxes APIs. | |||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||
* included in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||
*/ | |||
# if !defined(CH_CFG_USE_MAILBOXES) | |||
# define CH_CFG_USE_MAILBOXES TRUE | |||
# endif | |||
/** | |||
* @brief Core Memory Manager APIs. | |||
* @details If enabled then the core memory manager APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_MEMCORE) | |||
# define CH_CFG_USE_MEMCORE TRUE | |||
# endif | |||
/** | |||
* @brief Heap Allocator APIs. | |||
* @details If enabled then the memory heap allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||
* @p CH_CFG_USE_SEMAPHORES. | |||
* @note Mutexes are recommended. | |||
*/ | |||
# if !defined(CH_CFG_USE_HEAP) | |||
# define CH_CFG_USE_HEAP TRUE | |||
# endif | |||
/** | |||
* @brief Memory Pools Allocator APIs. | |||
* @details If enabled then the memory pools allocator APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_MEMPOOLS) | |||
# define CH_CFG_USE_MEMPOOLS TRUE | |||
# endif | |||
/** | |||
* @brief Objects FIFOs APIs. | |||
* @details If enabled then the objects FIFOs APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_OBJ_FIFOS) | |||
# define CH_CFG_USE_OBJ_FIFOS TRUE | |||
# endif | |||
/** | |||
* @brief Pipes APIs. | |||
* @details If enabled then the pipes APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
*/ | |||
# if !defined(CH_CFG_USE_PIPES) | |||
# define CH_CFG_USE_PIPES TRUE | |||
# endif | |||
/** | |||
* @brief Dynamic Threads APIs. | |||
* @details If enabled then the dynamic threads creation APIs are included | |||
* in the kernel. | |||
* | |||
* @note The default is @p TRUE. | |||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||
*/ | |||
# if !defined(CH_CFG_USE_DYNAMIC) | |||
# define CH_CFG_USE_DYNAMIC TRUE | |||
# endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Objects factory options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Objects Factory APIs. | |||
* @details If enabled then the objects factory APIs are included in the | |||
* kernel. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
# if !defined(CH_CFG_USE_FACTORY) | |||
# define CH_CFG_USE_FACTORY TRUE | |||
# endif | |||
/** | |||
* @brief Maximum length for object names. | |||
* @details If the specified length is zero then the name is stored by | |||
* pointer but this could have unintended side effects. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) | |||
# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 | |||
# endif | |||
/** | |||
* @brief Enables the registry of generic objects. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) | |||
# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE | |||
# endif | |||
/** | |||
* @brief Enables factory for generic buffers. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) | |||
# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE | |||
# endif | |||
/** | |||
* @brief Enables factory for semaphores. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_SEMAPHORES) | |||
# define CH_CFG_FACTORY_SEMAPHORES TRUE | |||
# endif | |||
/** | |||
* @brief Enables factory for mailboxes. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_MAILBOXES) | |||
# define CH_CFG_FACTORY_MAILBOXES TRUE | |||
# endif | |||
/** | |||
* @brief Enables factory for objects FIFOs. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_OBJ_FIFOS) | |||
# define CH_CFG_FACTORY_OBJ_FIFOS TRUE | |||
# endif | |||
/** | |||
* @brief Enables factory for Pipes. | |||
*/ | |||
# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) | |||
# define CH_CFG_FACTORY_PIPES TRUE | |||
# endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Debug options | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Debug option, kernel statistics. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
# if !defined(CH_DBG_STATISTICS) | |||
# define CH_DBG_STATISTICS FALSE | |||
# endif | |||
/** | |||
* @brief Debug option, system state check. | |||
* @details If enabled the correct call protocol for system APIs is checked | |||
* at runtime. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
# if !defined(CH_DBG_SYSTEM_STATE_CHECK) | |||
# define CH_DBG_SYSTEM_STATE_CHECK TRUE | |||
# endif | |||
/** | |||
* @brief Debug option, parameters checks. | |||
* @details If enabled then the checks on the API functions input | |||
* parameters are activated. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
# if !defined(CH_DBG_ENABLE_CHECKS) | |||
# define CH_DBG_ENABLE_CHECKS TRUE | |||
# endif | |||
/** | |||
* @brief Debug option, consistency checks. | |||
* @details If enabled then all the assertions in the kernel code are | |||
* activated. This includes consistency checks inside the kernel, | |||
* runtime anomalies and port-defined checks. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
# if !defined(CH_DBG_ENABLE_ASSERTS) | |||
# define CH_DBG_ENABLE_ASSERTS TRUE | |||
# endif | |||
/** | |||
* @brief Debug option, trace buffer. | |||
* @details If enabled then the trace buffer is activated. | |||
* | |||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
# if !defined(CH_DBG_TRACE_MASK) | |||
# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||
# endif | |||
/** | |||
* @brief Trace buffer entries. | |||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||
*/ | |||
# if !defined(CH_DBG_TRACE_BUFFER_SIZE) | |||
# define CH_DBG_TRACE_BUFFER_SIZE 128 | |||
# endif | |||
/** | |||
* @brief Debug option, stack checks. | |||
* @details If enabled then a runtime stack check is performed. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note The stack check is performed in a architecture/port dependent way. | |||
* It may not be implemented or some ports. | |||
* @note The default failure mode is to halt the system with the global | |||
* @p panic_msg variable set to @p NULL. | |||
*/ | |||
# if !defined(CH_DBG_ENABLE_STACK_CHECK) | |||
# define CH_DBG_ENABLE_STACK_CHECK TRUE | |||
# endif | |||
/** | |||
* @brief Debug option, stacks initialization. | |||
* @details If enabled then the threads working area is filled with a byte | |||
* value when a thread is created. This can be useful for the | |||
* runtime measurement of the used stack. | |||
* | |||
* @note The default is @p FALSE. | |||
*/ | |||
# if !defined(CH_DBG_FILL_THREADS) | |||
# define CH_DBG_FILL_THREADS TRUE | |||
# endif | |||
/** | |||
* @brief Debug option, threads profiling. | |||
* @details If enabled then a field is added to the @p thread_t structure that | |||
* counts the system ticks occurred while executing the thread. | |||
* | |||
* @note The default is @p FALSE. | |||
* @note This debug option is not currently compatible with the | |||
* tickless mode. | |||
*/ | |||
# if !defined(CH_DBG_THREADS_PROFILING) | |||
# define CH_DBG_THREADS_PROFILING FALSE | |||
# endif | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/** | |||
* @name Kernel hooks | |||
* @{ | |||
*/ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief System structure extension. | |||
* @details User fields added to the end of the @p ch_system_t structure. | |||
*/ | |||
# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ | |||
/** | |||
* @brief System initialization hook. | |||
* @details User initialization code added to the @p chSysInit() function | |||
* just before interrupts are enabled globally. | |||
*/ | |||
# define CH_CFG_SYSTEM_INIT_HOOK() \ | |||
{ /* Add threads initialization code here.*/ } | |||
/** | |||
* @brief Threads descriptor structure extension. | |||
* @details User fields added to the end of the @p thread_t structure. | |||
*/ | |||
# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ | |||
/** | |||
* @brief Threads initialization hook. | |||
* @details User initialization code added to the @p _thread_init() function. | |||
* | |||
* @note It is invoked from within @p _thread_init() and implicitly from all | |||
* the threads creation APIs. | |||
*/ | |||
# define CH_CFG_THREAD_INIT_HOOK(tp) \ | |||
{ /* Add threads initialization code here.*/ } | |||
/** | |||
* @brief Threads finalization hook. | |||
* @details User finalization code added to the @p chThdExit() API. | |||
*/ | |||
# define CH_CFG_THREAD_EXIT_HOOK(tp) \ | |||
{ /* Add threads finalization code here.*/ } | |||
/** | |||
* @brief Context switch hook. | |||
* @details This hook is invoked just before switching between threads. | |||
*/ | |||
# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ | |||
{ /* Context switch code here.*/ } | |||
/** | |||
* @brief ISR enter hook. | |||
*/ | |||
# define CH_CFG_IRQ_PROLOGUE_HOOK() \ | |||
{ /* IRQ prologue code here.*/ } | |||
/** | |||
* @brief ISR exit hook. | |||
*/ | |||
# define CH_CFG_IRQ_EPILOGUE_HOOK() \ | |||
{ /* IRQ epilogue code here.*/ } | |||
/** | |||
* @brief Idle thread enter hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to activate a power saving mode. | |||
*/ | |||
# define CH_CFG_IDLE_ENTER_HOOK() \ | |||
{ /* Idle-enter code here.*/ } | |||
/** | |||
* @brief Idle thread leave hook. | |||
* @note This hook is invoked within a critical zone, no OS functions | |||
* should be invoked from here. | |||
* @note This macro can be used to deactivate a power saving mode. | |||
*/ | |||
# define CH_CFG_IDLE_LEAVE_HOOK() \ | |||
{ /* Idle-leave code here.*/ } | |||
/** | |||
* @brief Idle Loop hook. | |||
* @details This hook is continuously invoked by the idle thread loop. | |||
*/ | |||
# define CH_CFG_IDLE_LOOP_HOOK() \ | |||
{ /* Idle loop code here.*/ } | |||
/** | |||
* @brief System tick event hook. | |||
* @details This hook is invoked in the system tick handler immediately | |||
* after processing the virtual timers queue. | |||
*/ | |||
# define CH_CFG_SYSTEM_TICK_HOOK() \ | |||
{ /* System tick event code here.*/ } | |||
/** | |||
* @brief System halt hook. | |||
* @details This hook is invoked in case to a system halting error before | |||
* the system is halted. | |||
*/ | |||
# define CH_CFG_SYSTEM_HALT_HOOK(reason) \ | |||
{ /* System halt code here.*/ } | |||
/** | |||
* @brief Trace hook. | |||
* @details This hook is invoked each time a new record is written in the | |||
* trace buffer. | |||
*/ | |||
# define CH_CFG_TRACE_HOOK(tep) \ | |||
{ /* Trace code here.*/ } | |||
/** @} */ | |||
/*===========================================================================*/ | |||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||
/*===========================================================================*/ | |||
#endif /* CHCONF_H */ | |||
/** @} */ |
@ -0,0 +1,253 @@ | |||
/* | |||
Copyright 2020 Tracy Wadleigh | |||
This program is free software: you can redistribute it and/or modify | |||
it under the terms of the GNU General Public License as published by | |||
the Free Software Foundation, either version 2 of the License, or | |||
(at your option) any later version. | |||
This program is distributed in the hope that it will be useful, | |||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
GNU General Public License for more details. | |||
You should have received a copy of the GNU General Public License | |||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
//#include "config_common.h" | |||
/* USB Device descriptor parameter */ | |||
#define VENDOR_ID 0xBEEF | |||
#define PRODUCT_ID 0xCACA | |||
#define DEVICE_VER 0x0001 | |||
#define MANUFACTURER Tracy Wadleigh | |||
#define PRODUCT tp69 | |||
#define DESCRIPTION A custom 69-key 65% keyboard with a trackpoint under keycap | |||
/* key matrix size */ | |||
#define MATRIX_ROWS 10 | |||
#define MATRIX_COLS 8 | |||
/* | |||
* Keyboard Matrix Assignments | |||
* | |||
* Change this to how you wired your keyboard | |||
* COLS: AVR pins used for columns, left to right | |||
* ROWS: AVR pins used for rows, top to bottom | |||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||
*/ | |||
/* 19 17 16 15 14 2 8 6 7 9 */ | |||
#define MATRIX_ROW_PINS { B2, B1, B0, C0, D1, D0, D3, D4, D2, C3 } | |||
/* 20 21 18 0 1 3 4 5 */ | |||
#define MATRIX_COL_PINS { D5, D6, A4, B16, B17, A1, A2, D7 } | |||
#define UNUSED_PINS | |||
/* for trackpoint: C1 (22) C2 (23) */ | |||
/* COL2ROW, ROW2COL*/ | |||
#define DIODE_DIRECTION COL2ROW | |||
/* | |||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||
*/ | |||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||
// #define BACKLIGHT_PIN B7 | |||
// #define BACKLIGHT_BREATHING | |||
// #define BACKLIGHT_LEVELS 3 | |||
// #define RGB_DI_PIN E2 | |||
// #ifdef RGB_DI_PIN | |||
// #define RGBLED_NUM 16 | |||
// #define RGBLIGHT_HUE_STEP 8 | |||
// #define RGBLIGHT_SAT_STEP 8 | |||
// #define RGBLIGHT_VAL_STEP 8 | |||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||
// /*== all animations enable ==*/ | |||
// #define RGBLIGHT_ANIMATIONS | |||
// /*== or choose animations ==*/ | |||
// #define RGBLIGHT_EFFECT_BREATHING | |||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||
// #define RGBLIGHT_EFFECT_SNAKE | |||
// #define RGBLIGHT_EFFECT_KNIGHT | |||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||
// /*== customize breathing effect ==*/ | |||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||
// /*==== use exp() and sin() ====*/ | |||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||
// #endif | |||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||
#define DEBOUNCE 5 | |||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||
//#define MATRIX_HAS_GHOST | |||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||
#define LOCKING_SUPPORT_ENABLE | |||
/* Locking resynchronize hack */ | |||
#define LOCKING_RESYNC_ENABLE | |||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||
*/ | |||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||
/* | |||
* Force NKRO | |||
* | |||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||
* makefile for this to work.) | |||
* | |||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||
* until the next keyboard reset. | |||
* | |||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||
* fully operational during normal computer usage. | |||
* | |||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||
* power-up. | |||
* | |||
*/ | |||
//#define FORCE_NKRO | |||
/* | |||
* Magic Key Options | |||
* | |||
* Magic keys are hotkey commands that allow control over firmware functions of | |||
* the keyboard. They are best used in combination with the HID Listen program, | |||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||
* | |||
* The options below allow the magic key functionality to be changed. This is | |||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||
* | |||
*/ | |||
/* key combination for magic key command */ | |||
/* defined by default; to change, uncomment and set to the combination you want */ | |||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) | |||
/* control how magic key switches layers */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||
/* override magic key keymap */ | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||
//#define MAGIC_KEY_HELP H | |||
//#define MAGIC_KEY_HELP_ALT SLASH | |||
//#define MAGIC_KEY_DEBUG D | |||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||
//#define MAGIC_KEY_DEBUG_KBD K | |||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||
//#define MAGIC_KEY_VERSION V | |||
//#define MAGIC_KEY_STATUS S | |||
//#define MAGIC_KEY_CONSOLE C | |||
//#define MAGIC_KEY_LAYER0 0 | |||
//#define MAGIC_KEY_LAYER0_ALT GRAVE | |||
//#define MAGIC_KEY_LAYER1 1 | |||
//#define MAGIC_KEY_LAYER2 2 | |||
//#define MAGIC_KEY_LAYER3 3 | |||
//#define MAGIC_KEY_LAYER4 4 | |||
//#define MAGIC_KEY_LAYER5 5 | |||
//#define MAGIC_KEY_LAYER6 6 | |||
//#define MAGIC_KEY_LAYER7 7 | |||
//#define MAGIC_KEY_LAYER8 8 | |||
//#define MAGIC_KEY_LAYER9 9 | |||
//#define MAGIC_KEY_BOOTLOADER B | |||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC | |||
//#define MAGIC_KEY_LOCK CAPS | |||
//#define MAGIC_KEY_EEPROM E | |||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE | |||
//#define MAGIC_KEY_NKRO N | |||
//#define MAGIC_KEY_SLEEP_LED Z | |||
/* | |||
* Feature disable options | |||
* These options are also useful to firmware size reduction. | |||
*/ | |||
/* disable debug print */ | |||
//#define NO_DEBUG | |||
/* disable print */ | |||
//#define NO_PRINT | |||
/* disable action features */ | |||
//#define NO_ACTION_LAYER | |||
//#define NO_ACTION_TAPPING | |||
//#define NO_ACTION_ONESHOT | |||
/* disable these deprecated features by default */ | |||
#define NO_ACTION_MACRO | |||
#define NO_ACTION_FUNCTION | |||
/* | |||
* MIDI options | |||
*/ | |||
/* Prevent use of disabled MIDI features in the keymap */ | |||
//#define MIDI_ENABLE_STRICT 1 | |||
/* enable basic MIDI features: | |||
- MIDI notes can be sent when in Music mode is on | |||
*/ | |||
//#define MIDI_BASIC | |||
/* enable advanced MIDI features: | |||
- MIDI notes can be added to the keymap | |||
- Octave shift and transpose | |||
- Virtual sustain, portamento, and modulation wheel | |||
- etc. | |||
*/ | |||
//#define MIDI_ADVANCED | |||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||
/* | |||
* HD44780 LCD Display Configuration | |||
*/ | |||
/* | |||
#define LCD_LINES 2 //< number of visible lines of the display | |||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||
#if LCD_IO_MODE | |||
#define LCD_PORT PORTB //< port for the LCD lines | |||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||
#define LCD_RS_PIN 3 //< pin for RS line | |||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||
#define LCD_RW_PIN 2 //< pin for RW line | |||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||
#define LCD_E_PIN 1 //< pin for Enable line | |||
#endif | |||
*/ | |||
/* Bootmagic Lite key configuration */ | |||
// #define BOOTMAGIC_LITE_ROW 0 | |||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,524 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
/** | |||
* @file templates/halconf.h | |||
* @brief HAL configuration header. | |||
* @details HAL configuration file, this file allows to enable or disable the | |||
* various device drivers from your application. You may also use | |||
* this file in order to override the device drivers default settings. | |||
* | |||
* @addtogroup HAL_CONF | |||
* @{ | |||
*/ | |||
#ifndef HALCONF_H | |||
# define HALCONF_H | |||
# define _CHIBIOS_HAL_CONF_ | |||
# define _CHIBIOS_HAL_CONF_VER_7_0_ | |||
# include "mcuconf.h" | |||
/** | |||
* @brief Enables the PAL subsystem. | |||
*/ | |||
# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||
# define HAL_USE_PAL TRUE | |||
# endif | |||
/** | |||
* @brief Enables the ADC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||
# define HAL_USE_ADC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the CAN subsystem. | |||
*/ | |||
# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||
# define HAL_USE_CAN FALSE | |||
# endif | |||
/** | |||
* @brief Enables the cryptographic subsystem. | |||
*/ | |||
# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) | |||
# define HAL_USE_CRY FALSE | |||
# endif | |||
/** | |||
* @brief Enables the DAC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||
# define HAL_USE_DAC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the GPT subsystem. | |||
*/ | |||
# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||
# define HAL_USE_GPT FALSE | |||
# endif | |||
/** | |||
* @brief Enables the I2C subsystem. | |||
*/ | |||
# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||
# define HAL_USE_I2C FALSE | |||
# endif | |||
/** | |||
* @brief Enables the I2S subsystem. | |||
*/ | |||
# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||
# define HAL_USE_I2S FALSE | |||
# endif | |||
/** | |||
* @brief Enables the ICU subsystem. | |||
*/ | |||
# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||
# define HAL_USE_ICU FALSE | |||
# endif | |||
/** | |||
* @brief Enables the MAC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||
# define HAL_USE_MAC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the MMC_SPI subsystem. | |||
*/ | |||
# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||
# define HAL_USE_MMC_SPI FALSE | |||
# endif | |||
/** | |||
* @brief Enables the PWM subsystem. | |||
*/ | |||
# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||
# define HAL_USE_PWM FALSE | |||
# endif | |||
/** | |||
* @brief Enables the RTC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||
# define HAL_USE_RTC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SDC subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||
# define HAL_USE_SDC FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SERIAL subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||
# define HAL_USE_SERIAL FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SERIAL over USB subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||
# define HAL_USE_SERIAL_USB FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SIO subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) | |||
# define HAL_USE_SIO FALSE | |||
# endif | |||
/** | |||
* @brief Enables the SPI subsystem. | |||
*/ | |||
# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||
# define HAL_USE_SPI FALSE | |||
# endif | |||
/** | |||
* @brief Enables the TRNG subsystem. | |||
*/ | |||
# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) | |||
# define HAL_USE_TRNG FALSE | |||
# endif | |||
/** | |||
* @brief Enables the UART subsystem. | |||
*/ | |||
# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||
# define HAL_USE_UART FALSE | |||
# endif | |||
/** | |||
* @brief Enables the USB subsystem. | |||
*/ | |||
# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||
# define HAL_USE_USB TRUE | |||
# endif | |||
/** | |||
* @brief Enables the WDG subsystem. | |||
*/ | |||
# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||
# define HAL_USE_WDG FALSE | |||
# endif | |||
/** | |||
* @brief Enables the WSPI subsystem. | |||
*/ | |||
# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) | |||
# define HAL_USE_WSPI FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* PAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
# define PAL_USE_CALLBACKS FALSE | |||
# endif | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) | |||
# define PAL_USE_WAIT FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* ADC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||
# define ADC_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define ADC_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* CAN driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Sleep mode related APIs inclusion switch. | |||
*/ | |||
# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||
# define CAN_USE_SLEEP_MODE TRUE | |||
# endif | |||
/** | |||
* @brief Enforces the driver to use direct callbacks rather than OSAL events. | |||
*/ | |||
# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) | |||
# define CAN_ENFORCE_USE_CALLBACKS FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* CRY driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the SW fall-back of the cryptographic driver. | |||
* @details When enabled, this option, activates a fall-back software | |||
* implementation for algorithms not supported by the underlying | |||
* hardware. | |||
* @note Fall-back implementations may not be present for all algorithms. | |||
*/ | |||
# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) | |||
# define HAL_CRY_USE_FALLBACK FALSE | |||
# endif | |||
/** | |||
* @brief Makes the driver forcibly use the fall-back implementations. | |||
*/ | |||
# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) | |||
# define HAL_CRY_ENFORCE_FALLBACK FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* DAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) | |||
# define DAC_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define DAC_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* I2C driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||
*/ | |||
# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define I2C_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* MAC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables the zero-copy API. | |||
*/ | |||
# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||
# define MAC_USE_ZERO_COPY FALSE | |||
# endif | |||
/** | |||
* @brief Enables an event sources for incoming packets. | |||
*/ | |||
# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||
# define MAC_USE_EVENTS TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* MMC_SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
* This option is recommended also if the SPI driver does not | |||
* use a DMA channel and heavily loads the CPU. | |||
*/ | |||
# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||
# define MMC_NICE_WAITING TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* SDC driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Number of initialization attempts before rejecting the card. | |||
* @note Attempts are performed at 10mS intervals. | |||
*/ | |||
# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||
# define SDC_INIT_RETRY 100 | |||
# endif | |||
/** | |||
* @brief Include support for MMC cards. | |||
* @note MMC support is not yet implemented so this option must be kept | |||
* at @p FALSE. | |||
*/ | |||
# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||
# define SDC_MMC_SUPPORT FALSE | |||
# endif | |||
/** | |||
* @brief Delays insertions. | |||
* @details If enabled this options inserts delays into the MMC waiting | |||
* routines releasing some extra CPU time for the threads with | |||
* lower priority, this may slow down the driver a bit however. | |||
*/ | |||
# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||
# define SDC_NICE_WAITING TRUE | |||
# endif | |||
/** | |||
* @brief OCR initialization constant for V20 cards. | |||
*/ | |||
# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) | |||
# define SDC_INIT_OCR_V20 0x50FF8000U | |||
# endif | |||
/** | |||
* @brief OCR initialization constant for non-V20 cards. | |||
*/ | |||
# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) | |||
# define SDC_INIT_OCR 0x80100000U | |||
# endif | |||
/*===========================================================================*/ | |||
/* SERIAL driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Default bit rate. | |||
* @details Configuration parameter, this is the baud rate selected for the | |||
* default configuration. | |||
*/ | |||
# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||
# define SERIAL_DEFAULT_BITRATE 38400 | |||
# endif | |||
/** | |||
* @brief Serial buffers size. | |||
* @details Configuration parameter, you can change the depth of the queue | |||
* buffers depending on the requirements of your application. | |||
* @note The default is 16 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
# define SERIAL_BUFFERS_SIZE 16 | |||
# endif | |||
/*===========================================================================*/ | |||
/* SERIAL_USB driver related setting. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Serial over USB buffers size. | |||
* @details Configuration parameter, the buffer size must be a multiple of | |||
* the USB data endpoint maximum packet size. | |||
* @note The default is 256 bytes for both the transmission and receive | |||
* buffers. | |||
*/ | |||
# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||
# define SERIAL_USB_BUFFERS_SIZE 1 | |||
# endif | |||
/** | |||
* @brief Serial over USB number of buffers. | |||
* @note The default is 2 buffers. | |||
*/ | |||
# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||
# define SERIAL_USB_BUFFERS_NUMBER 2 | |||
# endif | |||
/*===========================================================================*/ | |||
/* SPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||
# define SPI_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables circular transfers APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) | |||
# define SPI_USE_CIRCULAR FALSE | |||
# endif | |||
/** | |||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define SPI_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
/** | |||
* @brief Handling method for SPI CS line. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) | |||
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||
# endif | |||
/*===========================================================================*/ | |||
/* UART driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||
# define UART_USE_WAIT FALSE | |||
# endif | |||
/** | |||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define UART_USE_MUTUAL_EXCLUSION FALSE | |||
# endif | |||
/*===========================================================================*/ | |||
/* USB driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||
# define USB_USE_WAIT TRUE | |||
# endif | |||
/*===========================================================================*/ | |||
/* WSPI driver related settings. */ | |||
/*===========================================================================*/ | |||
/** | |||
* @brief Enables synchronous APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) | |||
# define WSPI_USE_WAIT TRUE | |||
# endif | |||
/** | |||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. | |||
* @note Disabling this option saves both code and data space. | |||
*/ | |||
# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||
# define WSPI_USE_MUTUAL_EXCLUSION TRUE | |||
# endif | |||
#endif /* HALCONF_H */ | |||
/** @} */ |
@ -0,0 +1,12 @@ | |||
{ | |||
"keyboard_name": "Twadlee TP69", | |||
"url": "https://github.com/twadleigh/qmk_firmware", | |||
"maintainer": "qmk", | |||
"width": 16, | |||
"height": 5, | |||
"layouts": { | |||
"LAYOUT": { | |||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3}, {"x":13.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2}, {"x":5.75, "y":4}, {"x":6.75, "y":4}, {"x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}] | |||
} | |||
} | |||
} |
@ -0,0 +1,28 @@ | |||
/* Copyright 2020 Tracy Wadleigh | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#include QMK_KEYBOARD_H | |||
// Defines names for use in layer keycodes and the keymap | |||
enum layer_names { _BASE }; | |||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||
[_BASE] = LAYOUT( | |||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LGUI, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, | |||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LALT, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||
KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL | |||
) | |||
}; |
@ -0,0 +1 @@ | |||
# The default keymap for tp69 |
@ -0,0 +1,45 @@ | |||
/* | |||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||
Licensed under the Apache License, Version 2.0 (the "License"); | |||
you may not use this file except in compliance with the License. | |||
You may obtain a copy of the License at | |||
http://www.apache.org/licenses/LICENSE-2.0 | |||
Unless required by applicable law or agreed to in writing, software | |||
distributed under the License is distributed on an "AS IS" BASIS, | |||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||
See the License for the specific language governing permissions and | |||
limitations under the License. | |||
*/ | |||
#ifndef _MCUCONF_H_ | |||
#define _MCUCONF_H_ | |||
#define KL2x_MCUCONF | |||
/* | |||
* HAL driver system settings. | |||
*/ | |||
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ | |||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE | |||
#define KINETIS_PLLCLK_FREQUENCY 96000000UL | |||
#define KINETIS_SYSCLK_FREQUENCY 48000000UL | |||
/* | |||
* SERIAL driver system settings. | |||
*/ | |||
#define KINETIS_SERIAL_USE_UART0 TRUE | |||
/* | |||
* USB driver settings | |||
*/ | |||
#define KINETIS_USB_USE_USB0 TRUE | |||
/* Need to redefine this, since the default (configured for K20x) might not apply | |||
* 2 for Teensy LC | |||
* 5 for Teensy 3.x */ | |||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 | |||
#endif /* _MCUCONF_H_ */ |
@ -0,0 +1,18 @@ | |||
# Twadlee TP69 | |||
![tp69](https://i.imgur.com/sC1qmJS.png) | |||
A 69-key keyboard having a Trackpoint unit under an additional 70th keycap. | |||
The layout is similar to a conventional 60% keyboard, but with additional 1u keys down a central split. The spacebar is also split, with the intervening space occupied by three mouse buttons and the left half replaced by a relocated `BACKSPACE` key. The right half of the spacebar is 2.25u. The space vacated by the `BACKSPACE` key is split into two additional 1u keys. The additional keycap on the home row does not cover a switch but a Trackpoint pointing device. All told, the 61 keycaps of the conventional 60% layout are augmented by an additional 9 1u keycaps, and a 2.25u keycap to replace the conventional 6.25u spacebar. | |||
Given the unconventional layout, only non-sculpted keycap profiles are practical. I use DSAs. | |||
* Keyboard Maintainer: [Tracy Wadleigh](https://github.com/twadleigh) | |||
* Hardware Supported: Teensy LC controller | |||
Make example for this keyboard (after setting up your build environment): | |||
make handwired/twadlee/tp69:default | |||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,28 @@ | |||
# MCU name | |||
MCU = MKL26Z64 | |||
# Build Options | |||
# change yes to no to disable | |||
# | |||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||
MOUSEKEY_ENABLE = yes # Mouse keys | |||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||
CONSOLE_ENABLE = yes # Console for debug | |||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||
NKRO_ENABLE = no # USB Nkey Rollover | |||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||
MIDI_ENABLE = no # MIDI support | |||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||
AUDIO_ENABLE = no # Audio output on port C6 | |||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs | |||
PS2_MOUSE_ENABLE = no | |||
USE_CHIBIOS_CONTRIB = yes | |||
# Enter lower-power sleep mode when on the ChibiOS idle thread | |||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |
@ -0,0 +1,18 @@ | |||
/* Copyright 2020 Tracy Wadleigh | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
* | |||
*/ | |||
#include "tp69.h" |
@ -0,0 +1,48 @@ | |||
/* Copyright 2020 Tracy Wadleigh | |||
* | |||
* This program is free software: you can redistribute it and/or modify | |||
* it under the terms of the GNU General Public License as published by | |||
* the Free Software Foundation, either version 2 of the License, or | |||
* (at your option) any later version. | |||
* | |||
* This program is distributed in the hope that it will be useful, | |||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||
* GNU General Public License for more details. | |||
* | |||
* You should have received a copy of the GNU General Public License | |||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||
*/ | |||
#pragma once | |||
#include "quantum.h" | |||
/* This is a shortcut to help you visually see your layout. | |||
* | |||
* The first section contains all of the arguments representing the physical | |||
* layout of the board and position of the keys. | |||
* | |||
* The second converts the arguments into a two-dimensional array which | |||
* represents the switch matrix. | |||
*/ | |||
#define LAYOUT( \ | |||
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ | |||
k10, k11, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, \ | |||
k20, k21, k23, k24, k25, k27, /**/ k70, k71, k72, k73, k74, k75, k77, \ | |||
k30, k32, k33, k34, k35, k36, k37, k81, k82, k83, k84, k85, k86, \ | |||
k40, k41, k43, k44, k46, k47, k91, k92, k94, k95, k96, k97 \ | |||
) \ | |||
{ \ | |||
{ k00, k01, k02, k03, k04, k05, k06, k07}, \ | |||
{ k10, k11, KC_NO, k13, k14, k15, k16, k17}, \ | |||
{ k20, k21, KC_NO, k23, k24, k25, KC_NO, k27}, \ | |||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37}, \ | |||
{ k40, k41, KC_NO, k43, k44, KC_NO, k46, k47}, \ | |||
{ k50, k51, k52, k53, k54, k55, k56, k57}, \ | |||
{ k60, k61, k62, k63, k64, k65, k66, k67}, \ | |||
{ k70, k71, k72, k73, k74, k75, KC_NO, k77}, \ | |||
{KC_NO, k81, k82, k83, k84, k85, k86, KC_NO}, \ | |||
{KC_NO, k91, k92, KC_NO, k94, k95, k96, k97} \ | |||
} |
@ -0,0 +1,139 @@ | |||
[ | |||
{ | |||
"backcolor": "", | |||
"name": "65% keyboard with pointing device under keycap", | |||
"author": "Tracy Wadleigh", | |||
"plate": false | |||
}, | |||
[ | |||
{ | |||
"a": 7, | |||
"f": 5 | |||
}, | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"" | |||
], | |||
[ | |||
{ | |||
"w": 1.5 | |||
}, | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
{ | |||
"w": 1.5 | |||
}, | |||
"" | |||
], | |||
[ | |||
{ | |||
"w": 1.75 | |||
}, | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
{ | |||
"x": 1 | |||
}, | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
{ | |||
"w": 2.25 | |||
}, | |||
"" | |||
], | |||
[ | |||
{ | |||
"w": 2.25 | |||
}, | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
"", | |||
{ | |||
"w": 2.75 | |||
}, | |||
"" | |||
], | |||
[ | |||
{ | |||
"w": 1.25 | |||
}, | |||
"", | |||
{ | |||
"w": 1.25 | |||
}, | |||
"", | |||
{ | |||
"w": 1.25 | |||
}, | |||
"", | |||
{ | |||
"w": 2 | |||
}, | |||
"", | |||
"", | |||
"", | |||
"", | |||
{ | |||
"w": 2.25 | |||
}, | |||
"", | |||
{ | |||
"w": 1.25 | |||
}, | |||
"", | |||
{ | |||
"w": 1.25 | |||
}, | |||
"", | |||
{ | |||
"w": 1.25 | |||
}, | |||
"", | |||
{ | |||
"w": 1.25 | |||
}, | |||
"" | |||
] | |||
] |