Includes info.json for custom layout and a minimal default keymap.pull/9130/head
@ -0,0 +1,700 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/** | |||||
* @file rt/templates/chconf.h | |||||
* @brief Configuration file template. | |||||
* @details A copy of this file must be placed in each project directory, it | |||||
* contains the application specific kernel settings. | |||||
* | |||||
* @addtogroup config | |||||
* @details Kernel related settings and hooks. | |||||
* @{ | |||||
*/ | |||||
#ifndef CHCONF_H | |||||
# define CHCONF_H | |||||
# define _CHIBIOS_RT_CONF_ | |||||
# define _CHIBIOS_RT_CONF_VER_6_0_ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name System timers settings | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief System time counter resolution. | |||||
* @note Allowed values are 16 or 32 bits. | |||||
*/ | |||||
# if !defined(CH_CFG_ST_RESOLUTION) | |||||
# define CH_CFG_ST_RESOLUTION 32 | |||||
# endif | |||||
/** | |||||
* @brief System tick frequency. | |||||
* @details Frequency of the system timer that drives the system ticks. This | |||||
* setting also defines the system tick time unit. | |||||
*/ | |||||
# if !defined(CH_CFG_ST_FREQUENCY) | |||||
# define CH_CFG_ST_FREQUENCY 1000 | |||||
# endif | |||||
/** | |||||
* @brief Time intervals data size. | |||||
* @note Allowed values are 16, 32 or 64 bits. | |||||
*/ | |||||
# if !defined(CH_CFG_INTERVALS_SIZE) | |||||
# define CH_CFG_INTERVALS_SIZE 32 | |||||
# endif | |||||
/** | |||||
* @brief Time types data size. | |||||
* @note Allowed values are 16 or 32 bits. | |||||
*/ | |||||
# if !defined(CH_CFG_TIME_TYPES_SIZE) | |||||
# define CH_CFG_TIME_TYPES_SIZE 32 | |||||
# endif | |||||
/** | |||||
* @brief Time delta constant for the tick-less mode. | |||||
* @note If this value is zero then the system uses the classic | |||||
* periodic tick. This value represents the minimum number | |||||
* of ticks that is safe to specify in a timeout directive. | |||||
* The value one is not valid, timeouts are rounded up to | |||||
* this value. | |||||
*/ | |||||
# if !defined(CH_CFG_ST_TIMEDELTA) | |||||
# define CH_CFG_ST_TIMEDELTA 0 | |||||
# endif | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Kernel parameters and options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Round robin interval. | |||||
* @details This constant is the number of system ticks allowed for the | |||||
* threads before preemption occurs. Setting this value to zero | |||||
* disables the preemption for threads with equal priority and the | |||||
* round robin becomes cooperative. Note that higher priority | |||||
* threads can still preempt, the kernel is always preemptive. | |||||
* @note Disabling the round robin preemption makes the kernel more compact | |||||
* and generally faster. | |||||
* @note The round robin preemption is not supported in tickless mode and | |||||
* must be set to zero in that case. | |||||
*/ | |||||
# if !defined(CH_CFG_TIME_QUANTUM) | |||||
# define CH_CFG_TIME_QUANTUM 20 | |||||
# endif | |||||
/** | |||||
* @brief Managed RAM size. | |||||
* @details Size of the RAM area to be managed by the OS. If set to zero | |||||
* then the whole available RAM is used. The core memory is made | |||||
* available to the heap allocator and/or can be used directly through | |||||
* the simplified core memory allocator. | |||||
* | |||||
* @note In order to let the OS manage the whole RAM the linker script must | |||||
* provide the @p __heap_base__ and @p __heap_end__ symbols. | |||||
* @note Requires @p CH_CFG_USE_MEMCORE. | |||||
*/ | |||||
# if !defined(CH_CFG_MEMCORE_SIZE) | |||||
# define CH_CFG_MEMCORE_SIZE 0 | |||||
# endif | |||||
/** | |||||
* @brief Idle thread automatic spawn suppression. | |||||
* @details When this option is activated the function @p chSysInit() | |||||
* does not spawn the idle thread. The application @p main() | |||||
* function becomes the idle thread and must implement an | |||||
* infinite loop. | |||||
*/ | |||||
# if !defined(CH_CFG_NO_IDLE_THREAD) | |||||
# define CH_CFG_NO_IDLE_THREAD FALSE | |||||
# endif | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Performance options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief OS optimization. | |||||
* @details If enabled then time efficient rather than space efficient code | |||||
* is used when two possible implementations exist. | |||||
* | |||||
* @note This is not related to the compiler optimization options. | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_OPTIMIZE_SPEED) | |||||
# define CH_CFG_OPTIMIZE_SPEED TRUE | |||||
# endif | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Subsystem options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Time Measurement APIs. | |||||
* @details If enabled then the time measurement APIs are included in | |||||
* the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_TM) | |||||
# define CH_CFG_USE_TM FALSE | |||||
# endif | |||||
/** | |||||
* @brief Threads registry APIs. | |||||
* @details If enabled then the registry APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_REGISTRY) | |||||
# define CH_CFG_USE_REGISTRY TRUE | |||||
# endif | |||||
/** | |||||
* @brief Threads synchronization APIs. | |||||
* @details If enabled then the @p chThdWait() function is included in | |||||
* the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_WAITEXIT) | |||||
# define CH_CFG_USE_WAITEXIT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Semaphores APIs. | |||||
* @details If enabled then the Semaphores APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_SEMAPHORES) | |||||
# define CH_CFG_USE_SEMAPHORES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Semaphores queuing mode. | |||||
* @details If enabled then the threads are enqueued on semaphores by | |||||
* priority rather than in FIFO order. | |||||
* | |||||
* @note The default is @p FALSE. Enable this if you have special | |||||
* requirements. | |||||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) | |||||
# define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE | |||||
# endif | |||||
/** | |||||
* @brief Mutexes APIs. | |||||
* @details If enabled then the mutexes APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MUTEXES) | |||||
# define CH_CFG_USE_MUTEXES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables recursive behavior on mutexes. | |||||
* @note Recursive mutexes are heavier and have an increased | |||||
* memory footprint. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) | |||||
# define CH_CFG_USE_MUTEXES_RECURSIVE FALSE | |||||
# endif | |||||
/** | |||||
* @brief Conditional Variables APIs. | |||||
* @details If enabled then the conditional variables APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_MUTEXES. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_CONDVARS) | |||||
# define CH_CFG_USE_CONDVARS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Conditional Variables APIs with timeout. | |||||
* @details If enabled then the conditional variables APIs with timeout | |||||
* specification are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_CONDVARS. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) | |||||
# define CH_CFG_USE_CONDVARS_TIMEOUT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Events Flags APIs. | |||||
* @details If enabled then the event flags APIs are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_EVENTS) | |||||
# define CH_CFG_USE_EVENTS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Events Flags APIs with timeout. | |||||
* @details If enabled then the events APIs with timeout specification | |||||
* are included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_EVENTS. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_EVENTS_TIMEOUT) | |||||
# define CH_CFG_USE_EVENTS_TIMEOUT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Synchronous Messages APIs. | |||||
* @details If enabled then the synchronous messages APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MESSAGES) | |||||
# define CH_CFG_USE_MESSAGES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Synchronous Messages queuing mode. | |||||
* @details If enabled then messages are served by priority rather than in | |||||
* FIFO order. | |||||
* | |||||
* @note The default is @p FALSE. Enable this if you have special | |||||
* requirements. | |||||
* @note Requires @p CH_CFG_USE_MESSAGES. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MESSAGES_PRIORITY) | |||||
# define CH_CFG_USE_MESSAGES_PRIORITY FALSE | |||||
# endif | |||||
/** | |||||
* @brief Mailboxes APIs. | |||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are | |||||
* included in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_SEMAPHORES. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MAILBOXES) | |||||
# define CH_CFG_USE_MAILBOXES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Core Memory Manager APIs. | |||||
* @details If enabled then the core memory manager APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MEMCORE) | |||||
# define CH_CFG_USE_MEMCORE TRUE | |||||
# endif | |||||
/** | |||||
* @brief Heap Allocator APIs. | |||||
* @details If enabled then the memory heap allocator APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or | |||||
* @p CH_CFG_USE_SEMAPHORES. | |||||
* @note Mutexes are recommended. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_HEAP) | |||||
# define CH_CFG_USE_HEAP TRUE | |||||
# endif | |||||
/** | |||||
* @brief Memory Pools Allocator APIs. | |||||
* @details If enabled then the memory pools allocator APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_MEMPOOLS) | |||||
# define CH_CFG_USE_MEMPOOLS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Objects FIFOs APIs. | |||||
* @details If enabled then the objects FIFOs APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_OBJ_FIFOS) | |||||
# define CH_CFG_USE_OBJ_FIFOS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Pipes APIs. | |||||
* @details If enabled then the pipes APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_PIPES) | |||||
# define CH_CFG_USE_PIPES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Dynamic Threads APIs. | |||||
* @details If enabled then the dynamic threads creation APIs are included | |||||
* in the kernel. | |||||
* | |||||
* @note The default is @p TRUE. | |||||
* @note Requires @p CH_CFG_USE_WAITEXIT. | |||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_DYNAMIC) | |||||
# define CH_CFG_USE_DYNAMIC TRUE | |||||
# endif | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Objects factory options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Objects Factory APIs. | |||||
* @details If enabled then the objects factory APIs are included in the | |||||
* kernel. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
# if !defined(CH_CFG_USE_FACTORY) | |||||
# define CH_CFG_USE_FACTORY TRUE | |||||
# endif | |||||
/** | |||||
* @brief Maximum length for object names. | |||||
* @details If the specified length is zero then the name is stored by | |||||
* pointer but this could have unintended side effects. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) | |||||
# define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 | |||||
# endif | |||||
/** | |||||
* @brief Enables the registry of generic objects. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) | |||||
# define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables factory for generic buffers. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) | |||||
# define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables factory for semaphores. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_SEMAPHORES) | |||||
# define CH_CFG_FACTORY_SEMAPHORES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables factory for mailboxes. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_MAILBOXES) | |||||
# define CH_CFG_FACTORY_MAILBOXES TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables factory for objects FIFOs. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_OBJ_FIFOS) | |||||
# define CH_CFG_FACTORY_OBJ_FIFOS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables factory for Pipes. | |||||
*/ | |||||
# if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) | |||||
# define CH_CFG_FACTORY_PIPES TRUE | |||||
# endif | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Debug options | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Debug option, kernel statistics. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
# if !defined(CH_DBG_STATISTICS) | |||||
# define CH_DBG_STATISTICS FALSE | |||||
# endif | |||||
/** | |||||
* @brief Debug option, system state check. | |||||
* @details If enabled the correct call protocol for system APIs is checked | |||||
* at runtime. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
# if !defined(CH_DBG_SYSTEM_STATE_CHECK) | |||||
# define CH_DBG_SYSTEM_STATE_CHECK TRUE | |||||
# endif | |||||
/** | |||||
* @brief Debug option, parameters checks. | |||||
* @details If enabled then the checks on the API functions input | |||||
* parameters are activated. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
# if !defined(CH_DBG_ENABLE_CHECKS) | |||||
# define CH_DBG_ENABLE_CHECKS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Debug option, consistency checks. | |||||
* @details If enabled then all the assertions in the kernel code are | |||||
* activated. This includes consistency checks inside the kernel, | |||||
* runtime anomalies and port-defined checks. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
# if !defined(CH_DBG_ENABLE_ASSERTS) | |||||
# define CH_DBG_ENABLE_ASSERTS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Debug option, trace buffer. | |||||
* @details If enabled then the trace buffer is activated. | |||||
* | |||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. | |||||
*/ | |||||
# if !defined(CH_DBG_TRACE_MASK) | |||||
# define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED | |||||
# endif | |||||
/** | |||||
* @brief Trace buffer entries. | |||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is | |||||
* different from @p CH_DBG_TRACE_MASK_DISABLED. | |||||
*/ | |||||
# if !defined(CH_DBG_TRACE_BUFFER_SIZE) | |||||
# define CH_DBG_TRACE_BUFFER_SIZE 128 | |||||
# endif | |||||
/** | |||||
* @brief Debug option, stack checks. | |||||
* @details If enabled then a runtime stack check is performed. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note The stack check is performed in a architecture/port dependent way. | |||||
* It may not be implemented or some ports. | |||||
* @note The default failure mode is to halt the system with the global | |||||
* @p panic_msg variable set to @p NULL. | |||||
*/ | |||||
# if !defined(CH_DBG_ENABLE_STACK_CHECK) | |||||
# define CH_DBG_ENABLE_STACK_CHECK TRUE | |||||
# endif | |||||
/** | |||||
* @brief Debug option, stacks initialization. | |||||
* @details If enabled then the threads working area is filled with a byte | |||||
* value when a thread is created. This can be useful for the | |||||
* runtime measurement of the used stack. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
*/ | |||||
# if !defined(CH_DBG_FILL_THREADS) | |||||
# define CH_DBG_FILL_THREADS TRUE | |||||
# endif | |||||
/** | |||||
* @brief Debug option, threads profiling. | |||||
* @details If enabled then a field is added to the @p thread_t structure that | |||||
* counts the system ticks occurred while executing the thread. | |||||
* | |||||
* @note The default is @p FALSE. | |||||
* @note This debug option is not currently compatible with the | |||||
* tickless mode. | |||||
*/ | |||||
# if !defined(CH_DBG_THREADS_PROFILING) | |||||
# define CH_DBG_THREADS_PROFILING FALSE | |||||
# endif | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @name Kernel hooks | |||||
* @{ | |||||
*/ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief System structure extension. | |||||
* @details User fields added to the end of the @p ch_system_t structure. | |||||
*/ | |||||
# define CH_CFG_SYSTEM_EXTRA_FIELDS /* Add threads custom fields here.*/ | |||||
/** | |||||
* @brief System initialization hook. | |||||
* @details User initialization code added to the @p chSysInit() function | |||||
* just before interrupts are enabled globally. | |||||
*/ | |||||
# define CH_CFG_SYSTEM_INIT_HOOK() \ | |||||
{ /* Add threads initialization code here.*/ } | |||||
/** | |||||
* @brief Threads descriptor structure extension. | |||||
* @details User fields added to the end of the @p thread_t structure. | |||||
*/ | |||||
# define CH_CFG_THREAD_EXTRA_FIELDS /* Add threads custom fields here.*/ | |||||
/** | |||||
* @brief Threads initialization hook. | |||||
* @details User initialization code added to the @p _thread_init() function. | |||||
* | |||||
* @note It is invoked from within @p _thread_init() and implicitly from all | |||||
* the threads creation APIs. | |||||
*/ | |||||
# define CH_CFG_THREAD_INIT_HOOK(tp) \ | |||||
{ /* Add threads initialization code here.*/ } | |||||
/** | |||||
* @brief Threads finalization hook. | |||||
* @details User finalization code added to the @p chThdExit() API. | |||||
*/ | |||||
# define CH_CFG_THREAD_EXIT_HOOK(tp) \ | |||||
{ /* Add threads finalization code here.*/ } | |||||
/** | |||||
* @brief Context switch hook. | |||||
* @details This hook is invoked just before switching between threads. | |||||
*/ | |||||
# define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) \ | |||||
{ /* Context switch code here.*/ } | |||||
/** | |||||
* @brief ISR enter hook. | |||||
*/ | |||||
# define CH_CFG_IRQ_PROLOGUE_HOOK() \ | |||||
{ /* IRQ prologue code here.*/ } | |||||
/** | |||||
* @brief ISR exit hook. | |||||
*/ | |||||
# define CH_CFG_IRQ_EPILOGUE_HOOK() \ | |||||
{ /* IRQ epilogue code here.*/ } | |||||
/** | |||||
* @brief Idle thread enter hook. | |||||
* @note This hook is invoked within a critical zone, no OS functions | |||||
* should be invoked from here. | |||||
* @note This macro can be used to activate a power saving mode. | |||||
*/ | |||||
# define CH_CFG_IDLE_ENTER_HOOK() \ | |||||
{ /* Idle-enter code here.*/ } | |||||
/** | |||||
* @brief Idle thread leave hook. | |||||
* @note This hook is invoked within a critical zone, no OS functions | |||||
* should be invoked from here. | |||||
* @note This macro can be used to deactivate a power saving mode. | |||||
*/ | |||||
# define CH_CFG_IDLE_LEAVE_HOOK() \ | |||||
{ /* Idle-leave code here.*/ } | |||||
/** | |||||
* @brief Idle Loop hook. | |||||
* @details This hook is continuously invoked by the idle thread loop. | |||||
*/ | |||||
# define CH_CFG_IDLE_LOOP_HOOK() \ | |||||
{ /* Idle loop code here.*/ } | |||||
/** | |||||
* @brief System tick event hook. | |||||
* @details This hook is invoked in the system tick handler immediately | |||||
* after processing the virtual timers queue. | |||||
*/ | |||||
# define CH_CFG_SYSTEM_TICK_HOOK() \ | |||||
{ /* System tick event code here.*/ } | |||||
/** | |||||
* @brief System halt hook. | |||||
* @details This hook is invoked in case to a system halting error before | |||||
* the system is halted. | |||||
*/ | |||||
# define CH_CFG_SYSTEM_HALT_HOOK(reason) \ | |||||
{ /* System halt code here.*/ } | |||||
/** | |||||
* @brief Trace hook. | |||||
* @details This hook is invoked each time a new record is written in the | |||||
* trace buffer. | |||||
*/ | |||||
# define CH_CFG_TRACE_HOOK(tep) \ | |||||
{ /* Trace code here.*/ } | |||||
/** @} */ | |||||
/*===========================================================================*/ | |||||
/* Port-specific settings (override port settings defaulted in chcore.h). */ | |||||
/*===========================================================================*/ | |||||
#endif /* CHCONF_H */ | |||||
/** @} */ |
@ -0,0 +1,253 @@ | |||||
/* | |||||
Copyright 2020 Tracy Wadleigh | |||||
This program is free software: you can redistribute it and/or modify | |||||
it under the terms of the GNU General Public License as published by | |||||
the Free Software Foundation, either version 2 of the License, or | |||||
(at your option) any later version. | |||||
This program is distributed in the hope that it will be useful, | |||||
but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
GNU General Public License for more details. | |||||
You should have received a copy of the GNU General Public License | |||||
along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
//#include "config_common.h" | |||||
/* USB Device descriptor parameter */ | |||||
#define VENDOR_ID 0xBEEF | |||||
#define PRODUCT_ID 0xCACA | |||||
#define DEVICE_VER 0x0001 | |||||
#define MANUFACTURER Tracy Wadleigh | |||||
#define PRODUCT tp69 | |||||
#define DESCRIPTION A custom 69-key 65% keyboard with a trackpoint under keycap | |||||
/* key matrix size */ | |||||
#define MATRIX_ROWS 10 | |||||
#define MATRIX_COLS 8 | |||||
/* | |||||
* Keyboard Matrix Assignments | |||||
* | |||||
* Change this to how you wired your keyboard | |||||
* COLS: AVR pins used for columns, left to right | |||||
* ROWS: AVR pins used for rows, top to bottom | |||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) | |||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) | |||||
*/ | |||||
/* 19 17 16 15 14 2 8 6 7 9 */ | |||||
#define MATRIX_ROW_PINS { B2, B1, B0, C0, D1, D0, D3, D4, D2, C3 } | |||||
/* 20 21 18 0 1 3 4 5 */ | |||||
#define MATRIX_COL_PINS { D5, D6, A4, B16, B17, A1, A2, D7 } | |||||
#define UNUSED_PINS | |||||
/* for trackpoint: C1 (22) C2 (23) */ | |||||
/* COL2ROW, ROW2COL*/ | |||||
#define DIODE_DIRECTION COL2ROW | |||||
/* | |||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. | |||||
*/ | |||||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 | |||||
// #define BACKLIGHT_PIN B7 | |||||
// #define BACKLIGHT_BREATHING | |||||
// #define BACKLIGHT_LEVELS 3 | |||||
// #define RGB_DI_PIN E2 | |||||
// #ifdef RGB_DI_PIN | |||||
// #define RGBLED_NUM 16 | |||||
// #define RGBLIGHT_HUE_STEP 8 | |||||
// #define RGBLIGHT_SAT_STEP 8 | |||||
// #define RGBLIGHT_VAL_STEP 8 | |||||
// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ | |||||
// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ | |||||
// /*== all animations enable ==*/ | |||||
// #define RGBLIGHT_ANIMATIONS | |||||
// /*== or choose animations ==*/ | |||||
// #define RGBLIGHT_EFFECT_BREATHING | |||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD | |||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL | |||||
// #define RGBLIGHT_EFFECT_SNAKE | |||||
// #define RGBLIGHT_EFFECT_KNIGHT | |||||
// #define RGBLIGHT_EFFECT_CHRISTMAS | |||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT | |||||
// #define RGBLIGHT_EFFECT_RGB_TEST | |||||
// #define RGBLIGHT_EFFECT_ALTERNATING | |||||
// /*== customize breathing effect ==*/ | |||||
// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ | |||||
// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 | |||||
// /*==== use exp() and sin() ====*/ | |||||
// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 | |||||
// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 | |||||
// #endif | |||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ | |||||
#define DEBOUNCE 5 | |||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ | |||||
//#define MATRIX_HAS_GHOST | |||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ | |||||
#define LOCKING_SUPPORT_ENABLE | |||||
/* Locking resynchronize hack */ | |||||
#define LOCKING_RESYNC_ENABLE | |||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. | |||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). | |||||
*/ | |||||
// #define GRAVE_ESC_CTRL_OVERRIDE | |||||
/* | |||||
* Force NKRO | |||||
* | |||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved | |||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the | |||||
* makefile for this to work.) | |||||
* | |||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) | |||||
* until the next keyboard reset. | |||||
* | |||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is | |||||
* fully operational during normal computer usage. | |||||
* | |||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) | |||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by | |||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a | |||||
* power-up. | |||||
* | |||||
*/ | |||||
//#define FORCE_NKRO | |||||
/* | |||||
* Magic Key Options | |||||
* | |||||
* Magic keys are hotkey commands that allow control over firmware functions of | |||||
* the keyboard. They are best used in combination with the HID Listen program, | |||||
* found here: https://www.pjrc.com/teensy/hid_listen.html | |||||
* | |||||
* The options below allow the magic key functionality to be changed. This is | |||||
* useful if your keyboard/keypad is missing keys and you want magic key support. | |||||
* | |||||
*/ | |||||
/* key combination for magic key command */ | |||||
/* defined by default; to change, uncomment and set to the combination you want */ | |||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) | |||||
/* control how magic key switches layers */ | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false | |||||
/* override magic key keymap */ | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS | |||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM | |||||
//#define MAGIC_KEY_HELP H | |||||
//#define MAGIC_KEY_HELP_ALT SLASH | |||||
//#define MAGIC_KEY_DEBUG D | |||||
//#define MAGIC_KEY_DEBUG_MATRIX X | |||||
//#define MAGIC_KEY_DEBUG_KBD K | |||||
//#define MAGIC_KEY_DEBUG_MOUSE M | |||||
//#define MAGIC_KEY_VERSION V | |||||
//#define MAGIC_KEY_STATUS S | |||||
//#define MAGIC_KEY_CONSOLE C | |||||
//#define MAGIC_KEY_LAYER0 0 | |||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE | |||||
//#define MAGIC_KEY_LAYER1 1 | |||||
//#define MAGIC_KEY_LAYER2 2 | |||||
//#define MAGIC_KEY_LAYER3 3 | |||||
//#define MAGIC_KEY_LAYER4 4 | |||||
//#define MAGIC_KEY_LAYER5 5 | |||||
//#define MAGIC_KEY_LAYER6 6 | |||||
//#define MAGIC_KEY_LAYER7 7 | |||||
//#define MAGIC_KEY_LAYER8 8 | |||||
//#define MAGIC_KEY_LAYER9 9 | |||||
//#define MAGIC_KEY_BOOTLOADER B | |||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC | |||||
//#define MAGIC_KEY_LOCK CAPS | |||||
//#define MAGIC_KEY_EEPROM E | |||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE | |||||
//#define MAGIC_KEY_NKRO N | |||||
//#define MAGIC_KEY_SLEEP_LED Z | |||||
/* | |||||
* Feature disable options | |||||
* These options are also useful to firmware size reduction. | |||||
*/ | |||||
/* disable debug print */ | |||||
//#define NO_DEBUG | |||||
/* disable print */ | |||||
//#define NO_PRINT | |||||
/* disable action features */ | |||||
//#define NO_ACTION_LAYER | |||||
//#define NO_ACTION_TAPPING | |||||
//#define NO_ACTION_ONESHOT | |||||
/* disable these deprecated features by default */ | |||||
#define NO_ACTION_MACRO | |||||
#define NO_ACTION_FUNCTION | |||||
/* | |||||
* MIDI options | |||||
*/ | |||||
/* Prevent use of disabled MIDI features in the keymap */ | |||||
//#define MIDI_ENABLE_STRICT 1 | |||||
/* enable basic MIDI features: | |||||
- MIDI notes can be sent when in Music mode is on | |||||
*/ | |||||
//#define MIDI_BASIC | |||||
/* enable advanced MIDI features: | |||||
- MIDI notes can be added to the keymap | |||||
- Octave shift and transpose | |||||
- Virtual sustain, portamento, and modulation wheel | |||||
- etc. | |||||
*/ | |||||
//#define MIDI_ADVANCED | |||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ | |||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1 | |||||
/* | |||||
* HD44780 LCD Display Configuration | |||||
*/ | |||||
/* | |||||
#define LCD_LINES 2 //< number of visible lines of the display | |||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display | |||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode | |||||
#if LCD_IO_MODE | |||||
#define LCD_PORT PORTB //< port for the LCD lines | |||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 | |||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 | |||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 | |||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 | |||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 | |||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 | |||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 | |||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 | |||||
#define LCD_RS_PORT LCD_PORT //< port for RS line | |||||
#define LCD_RS_PIN 3 //< pin for RS line | |||||
#define LCD_RW_PORT LCD_PORT //< port for RW line | |||||
#define LCD_RW_PIN 2 //< pin for RW line | |||||
#define LCD_E_PORT LCD_PORT //< port for Enable line | |||||
#define LCD_E_PIN 1 //< pin for Enable line | |||||
#endif | |||||
*/ | |||||
/* Bootmagic Lite key configuration */ | |||||
// #define BOOTMAGIC_LITE_ROW 0 | |||||
// #define BOOTMAGIC_LITE_COLUMN 0 |
@ -0,0 +1,524 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
/** | |||||
* @file templates/halconf.h | |||||
* @brief HAL configuration header. | |||||
* @details HAL configuration file, this file allows to enable or disable the | |||||
* various device drivers from your application. You may also use | |||||
* this file in order to override the device drivers default settings. | |||||
* | |||||
* @addtogroup HAL_CONF | |||||
* @{ | |||||
*/ | |||||
#ifndef HALCONF_H | |||||
# define HALCONF_H | |||||
# define _CHIBIOS_HAL_CONF_ | |||||
# define _CHIBIOS_HAL_CONF_VER_7_0_ | |||||
# include "mcuconf.h" | |||||
/** | |||||
* @brief Enables the PAL subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) | |||||
# define HAL_USE_PAL TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables the ADC subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) | |||||
# define HAL_USE_ADC FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the CAN subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) | |||||
# define HAL_USE_CAN FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the cryptographic subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) | |||||
# define HAL_USE_CRY FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the DAC subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) | |||||
# define HAL_USE_DAC FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the GPT subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) | |||||
# define HAL_USE_GPT FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the I2C subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) | |||||
# define HAL_USE_I2C FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the I2S subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) | |||||
# define HAL_USE_I2S FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the ICU subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) | |||||
# define HAL_USE_ICU FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the MAC subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) | |||||
# define HAL_USE_MAC FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the MMC_SPI subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) | |||||
# define HAL_USE_MMC_SPI FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the PWM subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) | |||||
# define HAL_USE_PWM FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the RTC subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) | |||||
# define HAL_USE_RTC FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the SDC subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) | |||||
# define HAL_USE_SDC FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the SERIAL subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) | |||||
# define HAL_USE_SERIAL FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the SERIAL over USB subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) | |||||
# define HAL_USE_SERIAL_USB FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the SIO subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) | |||||
# define HAL_USE_SIO FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the SPI subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) | |||||
# define HAL_USE_SPI FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the TRNG subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) | |||||
# define HAL_USE_TRNG FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the UART subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) | |||||
# define HAL_USE_UART FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the USB subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) | |||||
# define HAL_USE_USB TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables the WDG subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) | |||||
# define HAL_USE_WDG FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the WSPI subsystem. | |||||
*/ | |||||
# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) | |||||
# define HAL_USE_WSPI FALSE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* PAL driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) | |||||
# define PAL_USE_CALLBACKS FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define PAL_USE_WAIT FALSE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* ADC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define ADC_USE_WAIT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
# define ADC_USE_MUTUAL_EXCLUSION TRUE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* CAN driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Sleep mode related APIs inclusion switch. | |||||
*/ | |||||
# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) | |||||
# define CAN_USE_SLEEP_MODE TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enforces the driver to use direct callbacks rather than OSAL events. | |||||
*/ | |||||
# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) | |||||
# define CAN_ENFORCE_USE_CALLBACKS FALSE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* CRY driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables the SW fall-back of the cryptographic driver. | |||||
* @details When enabled, this option, activates a fall-back software | |||||
* implementation for algorithms not supported by the underlying | |||||
* hardware. | |||||
* @note Fall-back implementations may not be present for all algorithms. | |||||
*/ | |||||
# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) | |||||
# define HAL_CRY_USE_FALLBACK FALSE | |||||
# endif | |||||
/** | |||||
* @brief Makes the driver forcibly use the fall-back implementations. | |||||
*/ | |||||
# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) | |||||
# define HAL_CRY_ENFORCE_FALLBACK FALSE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* DAC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define DAC_USE_WAIT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
# define DAC_USE_MUTUAL_EXCLUSION TRUE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* I2C driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables the mutual exclusion APIs on the I2C bus. | |||||
*/ | |||||
# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
# define I2C_USE_MUTUAL_EXCLUSION TRUE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* MAC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables the zero-copy API. | |||||
*/ | |||||
# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) | |||||
# define MAC_USE_ZERO_COPY FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables an event sources for incoming packets. | |||||
*/ | |||||
# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) | |||||
# define MAC_USE_EVENTS TRUE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* MMC_SPI driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Delays insertions. | |||||
* @details If enabled this options inserts delays into the MMC waiting | |||||
* routines releasing some extra CPU time for the threads with | |||||
* lower priority, this may slow down the driver a bit however. | |||||
* This option is recommended also if the SPI driver does not | |||||
* use a DMA channel and heavily loads the CPU. | |||||
*/ | |||||
# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) | |||||
# define MMC_NICE_WAITING TRUE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* SDC driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Number of initialization attempts before rejecting the card. | |||||
* @note Attempts are performed at 10mS intervals. | |||||
*/ | |||||
# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) | |||||
# define SDC_INIT_RETRY 100 | |||||
# endif | |||||
/** | |||||
* @brief Include support for MMC cards. | |||||
* @note MMC support is not yet implemented so this option must be kept | |||||
* at @p FALSE. | |||||
*/ | |||||
# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) | |||||
# define SDC_MMC_SUPPORT FALSE | |||||
# endif | |||||
/** | |||||
* @brief Delays insertions. | |||||
* @details If enabled this options inserts delays into the MMC waiting | |||||
* routines releasing some extra CPU time for the threads with | |||||
* lower priority, this may slow down the driver a bit however. | |||||
*/ | |||||
# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) | |||||
# define SDC_NICE_WAITING TRUE | |||||
# endif | |||||
/** | |||||
* @brief OCR initialization constant for V20 cards. | |||||
*/ | |||||
# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) | |||||
# define SDC_INIT_OCR_V20 0x50FF8000U | |||||
# endif | |||||
/** | |||||
* @brief OCR initialization constant for non-V20 cards. | |||||
*/ | |||||
# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) | |||||
# define SDC_INIT_OCR 0x80100000U | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* SERIAL driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Default bit rate. | |||||
* @details Configuration parameter, this is the baud rate selected for the | |||||
* default configuration. | |||||
*/ | |||||
# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) | |||||
# define SERIAL_DEFAULT_BITRATE 38400 | |||||
# endif | |||||
/** | |||||
* @brief Serial buffers size. | |||||
* @details Configuration parameter, you can change the depth of the queue | |||||
* buffers depending on the requirements of your application. | |||||
* @note The default is 16 bytes for both the transmission and receive | |||||
* buffers. | |||||
*/ | |||||
# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||||
# define SERIAL_BUFFERS_SIZE 16 | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* SERIAL_USB driver related setting. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Serial over USB buffers size. | |||||
* @details Configuration parameter, the buffer size must be a multiple of | |||||
* the USB data endpoint maximum packet size. | |||||
* @note The default is 256 bytes for both the transmission and receive | |||||
* buffers. | |||||
*/ | |||||
# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) | |||||
# define SERIAL_USB_BUFFERS_SIZE 1 | |||||
# endif | |||||
/** | |||||
* @brief Serial over USB number of buffers. | |||||
* @note The default is 2 buffers. | |||||
*/ | |||||
# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) | |||||
# define SERIAL_USB_BUFFERS_NUMBER 2 | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* SPI driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define SPI_USE_WAIT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables circular transfers APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) | |||||
# define SPI_USE_CIRCULAR FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
# define SPI_USE_MUTUAL_EXCLUSION TRUE | |||||
# endif | |||||
/** | |||||
* @brief Handling method for SPI CS line. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) | |||||
# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* UART driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define UART_USE_WAIT FALSE | |||||
# endif | |||||
/** | |||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
# define UART_USE_MUTUAL_EXCLUSION FALSE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* USB driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define USB_USE_WAIT TRUE | |||||
# endif | |||||
/*===========================================================================*/ | |||||
/* WSPI driver related settings. */ | |||||
/*===========================================================================*/ | |||||
/** | |||||
* @brief Enables synchronous APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) | |||||
# define WSPI_USE_WAIT TRUE | |||||
# endif | |||||
/** | |||||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. | |||||
* @note Disabling this option saves both code and data space. | |||||
*/ | |||||
# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) | |||||
# define WSPI_USE_MUTUAL_EXCLUSION TRUE | |||||
# endif | |||||
#endif /* HALCONF_H */ | |||||
/** @} */ |
@ -0,0 +1,12 @@ | |||||
{ | |||||
"keyboard_name": "Twadlee TP69", | |||||
"url": "https://github.com/twadleigh/qmk_firmware", | |||||
"maintainer": "qmk", | |||||
"width": 16, | |||||
"height": 5, | |||||
"layouts": { | |||||
"LAYOUT": { | |||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":14.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3}, {"x":13.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2}, {"x":5.75, "y":4}, {"x":6.75, "y":4}, {"x":7.75, "y":4}, {"x":8.75, "y":4, "w":2.25}, {"x":11, "y":4, "w":1.25}, {"x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4, "w":1.25}, {"x":14.75, "y":4, "w":1.25}] | |||||
} | |||||
} | |||||
} |
@ -0,0 +1,28 @@ | |||||
/* Copyright 2020 Tracy Wadleigh | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#include QMK_KEYBOARD_H | |||||
// Defines names for use in layer keycodes and the keymap | |||||
enum layer_names { _BASE }; | |||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { | |||||
[_BASE] = LAYOUT( | |||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LGUI, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, | |||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LALT, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, | |||||
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, | |||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, | |||||
KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL | |||||
) | |||||
}; |
@ -0,0 +1 @@ | |||||
# The default keymap for tp69 |
@ -0,0 +1,45 @@ | |||||
/* | |||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio | |||||
Licensed under the Apache License, Version 2.0 (the "License"); | |||||
you may not use this file except in compliance with the License. | |||||
You may obtain a copy of the License at | |||||
http://www.apache.org/licenses/LICENSE-2.0 | |||||
Unless required by applicable law or agreed to in writing, software | |||||
distributed under the License is distributed on an "AS IS" BASIS, | |||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |||||
See the License for the specific language governing permissions and | |||||
limitations under the License. | |||||
*/ | |||||
#ifndef _MCUCONF_H_ | |||||
#define _MCUCONF_H_ | |||||
#define KL2x_MCUCONF | |||||
/* | |||||
* HAL driver system settings. | |||||
*/ | |||||
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ | |||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE | |||||
#define KINETIS_PLLCLK_FREQUENCY 96000000UL | |||||
#define KINETIS_SYSCLK_FREQUENCY 48000000UL | |||||
/* | |||||
* SERIAL driver system settings. | |||||
*/ | |||||
#define KINETIS_SERIAL_USE_UART0 TRUE | |||||
/* | |||||
* USB driver settings | |||||
*/ | |||||
#define KINETIS_USB_USE_USB0 TRUE | |||||
/* Need to redefine this, since the default (configured for K20x) might not apply | |||||
* 2 for Teensy LC | |||||
* 5 for Teensy 3.x */ | |||||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 | |||||
#endif /* _MCUCONF_H_ */ |
@ -0,0 +1,18 @@ | |||||
# Twadlee TP69 | |||||
![tp69](https://i.imgur.com/sC1qmJS.png) | |||||
A 69-key keyboard having a Trackpoint unit under an additional 70th keycap. | |||||
The layout is similar to a conventional 60% keyboard, but with additional 1u keys down a central split. The spacebar is also split, with the intervening space occupied by three mouse buttons and the left half replaced by a relocated `BACKSPACE` key. The right half of the spacebar is 2.25u. The space vacated by the `BACKSPACE` key is split into two additional 1u keys. The additional keycap on the home row does not cover a switch but a Trackpoint pointing device. All told, the 61 keycaps of the conventional 60% layout are augmented by an additional 9 1u keycaps, and a 2.25u keycap to replace the conventional 6.25u spacebar. | |||||
Given the unconventional layout, only non-sculpted keycap profiles are practical. I use DSAs. | |||||
* Keyboard Maintainer: [Tracy Wadleigh](https://github.com/twadleigh) | |||||
* Hardware Supported: Teensy LC controller | |||||
Make example for this keyboard (after setting up your build environment): | |||||
make handwired/twadlee/tp69:default | |||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
@ -0,0 +1,28 @@ | |||||
# MCU name | |||||
MCU = MKL26Z64 | |||||
# Build Options | |||||
# change yes to no to disable | |||||
# | |||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration | |||||
MOUSEKEY_ENABLE = yes # Mouse keys | |||||
EXTRAKEY_ENABLE = yes # Audio control and System control | |||||
CONSOLE_ENABLE = yes # Console for debug | |||||
COMMAND_ENABLE = yes # Commands for debug and configuration | |||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE | |||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend | |||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work | |||||
NKRO_ENABLE = no # USB Nkey Rollover | |||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality | |||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow | |||||
MIDI_ENABLE = no # MIDI support | |||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID | |||||
AUDIO_ENABLE = no # Audio output on port C6 | |||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches | |||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs | |||||
PS2_MOUSE_ENABLE = no | |||||
USE_CHIBIOS_CONTRIB = yes | |||||
# Enter lower-power sleep mode when on the ChibiOS idle thread | |||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE |
@ -0,0 +1,18 @@ | |||||
/* Copyright 2020 Tracy Wadleigh | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
* | |||||
*/ | |||||
#include "tp69.h" |
@ -0,0 +1,48 @@ | |||||
/* Copyright 2020 Tracy Wadleigh | |||||
* | |||||
* This program is free software: you can redistribute it and/or modify | |||||
* it under the terms of the GNU General Public License as published by | |||||
* the Free Software Foundation, either version 2 of the License, or | |||||
* (at your option) any later version. | |||||
* | |||||
* This program is distributed in the hope that it will be useful, | |||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of | |||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |||||
* GNU General Public License for more details. | |||||
* | |||||
* You should have received a copy of the GNU General Public License | |||||
* along with this program. If not, see <http://www.gnu.org/licenses/>. | |||||
*/ | |||||
#pragma once | |||||
#include "quantum.h" | |||||
/* This is a shortcut to help you visually see your layout. | |||||
* | |||||
* The first section contains all of the arguments representing the physical | |||||
* layout of the board and position of the keys. | |||||
* | |||||
* The second converts the arguments into a two-dimensional array which | |||||
* represents the switch matrix. | |||||
*/ | |||||
#define LAYOUT( \ | |||||
k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \ | |||||
k10, k11, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k66, k67, \ | |||||
k20, k21, k23, k24, k25, k27, /**/ k70, k71, k72, k73, k74, k75, k77, \ | |||||
k30, k32, k33, k34, k35, k36, k37, k81, k82, k83, k84, k85, k86, \ | |||||
k40, k41, k43, k44, k46, k47, k91, k92, k94, k95, k96, k97 \ | |||||
) \ | |||||
{ \ | |||||
{ k00, k01, k02, k03, k04, k05, k06, k07}, \ | |||||
{ k10, k11, KC_NO, k13, k14, k15, k16, k17}, \ | |||||
{ k20, k21, KC_NO, k23, k24, k25, KC_NO, k27}, \ | |||||
{ k30, KC_NO, k32, k33, k34, k35, k36, k37}, \ | |||||
{ k40, k41, KC_NO, k43, k44, KC_NO, k46, k47}, \ | |||||
{ k50, k51, k52, k53, k54, k55, k56, k57}, \ | |||||
{ k60, k61, k62, k63, k64, k65, k66, k67}, \ | |||||
{ k70, k71, k72, k73, k74, k75, KC_NO, k77}, \ | |||||
{KC_NO, k81, k82, k83, k84, k85, k86, KC_NO}, \ | |||||
{KC_NO, k91, k92, KC_NO, k94, k95, k96, k97} \ | |||||
} |
@ -0,0 +1,139 @@ | |||||
[ | |||||
{ | |||||
"backcolor": "", | |||||
"name": "65% keyboard with pointing device under keycap", | |||||
"author": "Tracy Wadleigh", | |||||
"plate": false | |||||
}, | |||||
[ | |||||
{ | |||||
"a": 7, | |||||
"f": 5 | |||||
}, | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"" | |||||
], | |||||
[ | |||||
{ | |||||
"w": 1.5 | |||||
}, | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
{ | |||||
"w": 1.5 | |||||
}, | |||||
"" | |||||
], | |||||
[ | |||||
{ | |||||
"w": 1.75 | |||||
}, | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
{ | |||||
"x": 1 | |||||
}, | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
{ | |||||
"w": 2.25 | |||||
}, | |||||
"" | |||||
], | |||||
[ | |||||
{ | |||||
"w": 2.25 | |||||
}, | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
{ | |||||
"w": 2.75 | |||||
}, | |||||
"" | |||||
], | |||||
[ | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 2 | |||||
}, | |||||
"", | |||||
"", | |||||
"", | |||||
"", | |||||
{ | |||||
"w": 2.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"", | |||||
{ | |||||
"w": 1.25 | |||||
}, | |||||
"" | |||||
] | |||||
] |