* Add missing parentheses to quantum_keycodes macros

* Add missing parentheses to progmem macros

Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us.
TC5 device and supporting routines removed as it was the old us delay counter.
wait_ms is now properly a macro to CLK_delay_ms.
wait_us is now properly a macro to CLK_delay_us.
Removed CLK_get_us as it has no use.
All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing.
All calls to CLK_delay_ms() have been replaced by wait_ms().
All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope.
Corrected typing of variables using 64bit ms timer readings if needed.

* initial commit, this now mostly works

- RGB controls work
- Dynamic keymap still broken due to eeprom
- Via works

* STM32 eeprom update

- Update EEPROM emulation library to handle 8bit data like AVR.
- This library also allows for multiple page pairs resulting in greater EEPROM size flexibility

* hs60 changes

* HS60 hhkb added

* Update keyboards/hs60/v2/config.h

Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>

* Keep pressed keys on layer state change

* Add doc comment for clear_keyboard_but_mods_and_keys

* Keep pressed keys only if PREVENT_STUCK_MODIFIERS is on

* Check STRICT_LAYER_RELEASE instead of PREVENT_STUCK_MODIFIERS

* add temporary compile test shell script

* Extended support of SKIP_VERSION to make invariant compile results during testing.

* build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support

Support compiled object enclosed in library.

e.g.
```
LIB_SRC += xxxx.c
xxxx.c --> xxxx.o ---> xxxx.a
```

* remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c

* add SKIP_DEBUG_INFO into tmk_core/rules.mk

When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time.

* tmk_core/rules.mk: Library object need -fno-lto

* add SKIP_DEBUG_INFO=yes

* remove temporary compile test shell script

* add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h

* quantum/split_common/serial.c: Changed not to use USE_I2C.

GNUC compilers greater than version 6 already have the macro __always_inline defined. This fix checks GNUC version before defining the macro itself.

* Add delay in Tap Code to avoid issues

I think a few people have reporting issues with it working properly, and it may be a timing issue.  The 'register_code' uses this sort of delay in some of the functions, and
this is probably why.

Adding the 100ms delay should hopefully fix any issues with it.

* Make tap_code delay configurable

* Update documentation

* Bring tap_code16 inline with changes

* Fix type for tap_code16

Bad copy-paste job

* Just use the value check for the define

* Clarify timing in docs

Co-Authored-By: drashna <drashna@live.com>

* Wordsmithing

Co-Authored-By: drashna <drashna@live.com>

* Add standard ALGR defition, remove (re)definitions from language files

* Use ALGR(kc) consistently in ALTGR(kc) aliases

* Non-Nordic keymaps should not use NO_ALGR

* Add standard KC_ALGR definition

* Update docs with ALGR and KC_ALGR

* Update SS_ALGR and ALGR_T aliases

MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level.
Macros led_* replaced by DBG_LED_*
Macros m15_* replaced by DBG_1_*
Macros m27_* replaced by DBG_2_*
Macros m28_* replaced by DBG_3_*
For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection.
m15_print(...) renamed to dbg_print(...) to get away from hard coded port names.
dbg_print function now follows similar pattern to debug led output.

* Add initial support for vertically-oriented animations

* DRY up vertical animation support

* Fix animation code for arm_atsam led_matrix to work in all directions

* Adjust py calculation to base off bottom rather than top

Fixes #4471
Fixes #4517

* add initial support for hadron ver3

* add initial support for hadron ver3

* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display

* initial work on OLED using qwiic driver

* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality

* moved oled defines to config.h and added ifndef to micro_oled driver

* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.

* added equation to automatically calculate display offset based on screen width

* adding time-out timer to oled display

* changed read lock staus via read_led_state

* lock indications fixes

* Added scroll lock indication to oled

* add support for DRV2605 haptic driver

* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Fixes for PR

* PR fixes

* fix old persistent layer function to use new set_single_persistent_default_layer

* fix issues with changing makefile defines that broken per-key haptic pulse

* Comment fixes

* Add definable parameter and auto-calibration based on motor choice

bug was causing lots of dropped events for me.

* Unify multiple HID interfaces into one

This reduces the number of USB endpoints required, which frees them up
for other things.

NKRO and EXTRAKEY always use the shared endpoint.

By default, MOUSEKEY also uses it. This means it won't work as a Boot
Procotol mouse in some BIOSes, etc. If you really think your
keyboard needs to work as a mouse in your BIOS, set
MOUSE_SHARED_EP = no in your rules.mk.

By default, the core keyboard does not use the shared endpoint, as not
all BIOSes are standards compliant and that's one place you don't want
to find out your keyboard doesn't work.. If you are really confident,
you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here
too.

* unify endpoints: ChibiOS protocol implementation

* fixup: missing #ifdef EXTRAKEY_ENABLEs

broke build on AVR with EXTRAKEY disabled

* endpoints: restore error when too many endpoints required

* lufa: wait up to 10ms to send keyboard input

This avoids packets being dropped when two reports are sent in quick
succession (eg. releasing a dual role key).

* endpoints: fix compile on ARM_ATSAM

* endpoint: ARM_ATSAM fixes

No longer use wrong or unexpected endpoint IDs

* endpoints: accommodate VUSB protocol

V-USB has its own, understandably simple ideas about the report formats.
It already blasts the mouse and extrakeys through one endpoint with
report IDs. We just stay out of its way.

* endpoints: document new endpoint configuration options

* endpoints: respect keyboard_report->mods in NKRO

The caller(s) of host_keyboard_send expect to be able to just drop
modifiers in the mods field and not worry about whether NKRO is in use.
This is a good thing. So we just shift it over if needs be.

* endpoints: report.c: update for new keyboard_report format

* add functions to set specific backlight state

* add function to query backlight state

* update documentation with new backlight functions

* Update tmk_core/common/backlight.c

Co-Authored-By: codyd51 <phillip.ennen@gmail.com>

* Update tmk_core/common/backlight.h

Co-Authored-By: codyd51 <phillip.ennen@gmail.com>

* update docs for is_backlight_enabled() name change

Rewrote USB state tracking for implementation of suspend state.
Updated suspend.c in entirety.
Main subtasks (generally hardware related) are now run prior to keyboard task.

Fix for Massdrop CTRL and ALT keyboards not waking computer from sleep

This way all split keyboards are using that code instead of just those using split_common with the fix

* add computed pins from mcu type

* update for atmega32a

* doc typo

* add atmega16 chips, link to references

* remove avr include from config

* exclude assembler in config.h includes

* consolodate options, add 646

* fix typo in pindef

Fix undefined reference to `console_printf` for CTRL and ALT keyboards when enabling CONSOLE_ENABLE

* Preliminary additon of bootmagic lite functionality

* Cleanup code

* Clean up bootmagic code

* Add documentation and clean up code

* Make 'lite' an option for BOOTMAGIC_ENABLE

* Update Templates with note about Bootmagic Lite option

* Detect Debounce variable

* Make sure debounce is a non-zero number

* Capitalize Bootmagic

* Capitalize bootmagic

* Update wording

* Re-add EEPROM reset, by popular demand

And add eeprom-less version to drashna userspace for his sanity

* Fix spacing

* Set BOOTMAGIC_ENABLE to use full/lite/off

And default yes to "full" for compatibility

* Add Bootmagic lite info to templates

* Remove text from makefiles

* Cleanup of makefile

* mention yes in bootmagic docs

* Wordsmitthing the docs

* Fix white spaces

* Readd default bootmagic setting, because it's necessary

* Add delayed flashing option for DFU Util

* Use a loop to make code cleaner

* Make delay configurable but default to 10

* Better formatting of check

* Made DZ60 layout with calculator

* Cleaned up and commented, preparing to fix bug with negative in front of open parenthesis as first character

* Fixed bug where negative sign infront of parenthesis as first character was parsed incorrectly

* Made a better solution for the bug from the previous commit

* Modularized and added a userfile so that this code can be used on various keyboards, found in doogle999

* Removed commented code from keymap

* Made the layer that is used for calculations a define so that it can be changed per keyboard

* Made the readme

* Made the readme in the correct place

* Revert "Made the readme in the correct place"

This reverts commit 7f8b59ed9e.

* Manually synced with qmk upstream

* Stopped repeat, made keys print character that they are defined as rather than what the keyboard wants them to do

* Added support for numpad, might make all keycodes custom so that there is no need to change doogle999.c if you want to change the keycode that is associated with a function, also made numpad automatically activating an option

* Fixed some bugs with backspacing, updated the readme

* Fixed some bugs with numlock turning on at the wrong times when a shift key was down

* Made the return to layer work automatically instead of just forcing it to layer 0

* fixes and style changes, 20% decreased binary size

* Fixed some bugs with double printing and compilation errors on my side

* Fixed bug with exceeding the buffer size

* Removed changes that added const-ness

* Made changes so that backspace does not repeat to remove backspace bugs, still some bugs with recalculating without having typed anything

* Fixed obo error with calc main loop

* Made includes more accurate in keymap for dz60

* Moved flags to user makefile

* Converter: add XT USB converter from TMK

* Converter: port TMK code for USB converter to QMK

* Apply requested changes after code review by @drashna

- use "pragma once" instead of include guards
- use LAYOUT instead of KEYMAP
- allow customisation with matrix_init_user() and matrix_scan_user()
- set BOOTLOADER instead of BOOTLOADER_SIZE
- Add XT_ENABLE to OPT_DEFS

* Remove unnecessary lines

* bminiex : Working backlight

* bminiex keyboard with fixes

* bminiex keyboard more fixes

* * Add stm32f1xx EEPROM emulation
* Fix eeprom update compare bug

Squashed commit of the following:

commit b8f248ae08
Author: hsgw <urkwtky@gmail.com>
Date:   Sat Sep 15 19:13:48 2018 +0900

    fix EEPROM_update wrong compare

commit d4ed4e6ea8
Author: hsgw <urkwtky@gmail.com>
Date:   Sat Sep 15 17:43:47 2018 +0900

    eeprom fix initialization define

commit b61aa7c04d
Author: hsgw <urkwtky@gmail.com>
Date:   Sat Sep 15 16:33:40 2018 +0900

    maybe working

* Fix FLASH_KEY defines

Added hid_listen USB device for arm_atsam USB protocol.
Debug printing is now done through the console device (CONSOLE_ENABLE = yes) rather than the virtser device, for viewing in hid_listen.
Function dpf(...) renamed to CDC_printf(...) and should now be called directly if intending to print to the virtual serial device.

* Add tap_code

* formatting

* Doc clarification

* Rename variable to make more consistent

* Add Function level EEPROM configuration

Add kb and user functions for EEPROM, and example of how to use it.

* Bug fixes and demo

* Additional cleanup

* Add EEPROM reset macro to example

* Forgot init function in list

* Move eeconfig_init_quantum function to quantum.c and actually set default layer

* See if removing weak quantum function fixes issue

* Fix travis compile error

* Remove ifdef blocks from EECONFIG so settings are always set

* Fix for ARM EEPROM updates

* Fix merge issues

* Fix potential STM32 EEPROM issues

Adds support for CTRL keyboards to enter bootloader via bootloader_jump()

* Update for SEND_STRING usage

Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.

* Updates for send string, syscalls, stdio, debug prints, auto shift

Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.

* CTRL and ALT keymap updates

CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no

* Code cleanup as per discussion with vomindoraan

Code cleanup as per discussion with vomindoraan

* add st-link_cli support

* format names

* add 'mavrdude' target into tmk_core/avr.mk

I made it a little convenient when writing the same binary to multiple Pro Micro.

* rename target name 'mavrdude' to 'avrdude-loop'

* modify docs/flashing.md about avrdude-loop

* mdify docs/flashing.md again

* modifi docs/flashing.md 3rd

* Treat too-large firmwares as an error, not a warning

* switch the order of printing

* I think I have it

* adjust the formatting some more

* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.