qmk_firmware

3.5 GiB

Tree: 0093d3d761

Author	SHA1	Message	Date
Joel Challis	0093d3d761	Initial USB2422 driver (#14835 )	2 years ago
Jesper Jensen	63d06655e6	gcc 10 compatibility for Drop alt (#9485 ) * Split dmac_desc declaration and definition According to the official documentation[1] gcc 10 is more strict about correct extern usage. I've had to move the definition of dmac_desc and dmac_desc_wb from i2c_master.h to the corresponding .c file. This could be an issue if anyone includes the i2c_master.h file without liking with the object file. [1]: https://gcc.gnu.org/gcc-10/porting_to.html * Remove the keymap_config definition from keymaps The keymap_config def was conflicting with the one found in tmk_core/common/magic.c. Declaring it extern in magic.c breaks a bunch of keyboard that rely on that declaration (like the ergodox). Instead I've removed the one found in the keymap.c of the massdrop alt. The same change will have to be made to other keyboards.	3 years ago
skullY	b624f32f94	clang-format changes	4 years ago
Daniel Prilik	763b26cdb9	RGB Matrix support for Massdrop CTRL/ALT (#5328 ) * port Massdrop CTRL/ALT to use RGB Matrix Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com> * Massdrop lighting support working This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk. Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired. * Updating config based on testing results with patrickmt & compile errors * Updates for PR5328 For CTRL and ALT: Moved location of new RGB Matrix macros from config_led.h to config.h. Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing. Re-added missing breathing code for when Massdrop configurator mode is defined. * remove prilik keymap form PR	5 years ago
patrickmt	6e984a8b5e	Update to arm_atsam wait and timer routines Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us. TC5 device and supporting routines removed as it was the old us delay counter. wait_ms is now properly a macro to CLK_delay_ms. wait_us is now properly a macro to CLK_delay_us. Removed CLK_get_us as it has no use. All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing. All calls to CLK_delay_ms() have been replaced by wait_ms(). All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope. Corrected typing of variables using 64bit ms timer readings if needed.	5 years ago
patrickmt	4a5e68f4f2	Bringing Massdrop keyboard hardware configuration to keyboard level (#4593 ) MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level. Macros led_* replaced by DBG_LED_* Macros m15_* replaced by DBG_1_* Macros m27_* replaced by DBG_2_* Macros m28_* replaced by DBG_3_* For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection. m15_print(...) renamed to dbg_print(...) to get away from hard coded port names. dbg_print function now follows similar pattern to debug led output.	5 years ago
patrickmt	cec203ea80	USB Suspend for arm_atsam protocol Rewrote USB state tracking for implementation of suspend state. Updated suspend.c in entirety. Main subtasks (generally hardware related) are now run prior to keyboard task.	5 years ago
patrickmt	b8a0d3de3d	Keyboard: ALT keymap update and LED driver brightness mismatch fix (#3890 ) * ALT keymap update Added additional End key on layer 1 to match key cap * LED driver update addressing PR #3871 Update sync between IS31FL3733 drivers is causing varying behavior in keyboards including brightness mismatch and slight flicker at very low rgb values. Visually, disabling sync is not noticeable. Ref PR #3871 by guarnacciaa.	5 years ago
patrickmt	30680c6eb3	Massdrop keyboard support (#3780 ) * Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files	5 years ago

9 Commits (0093d3d761e60a31bb2a15a5859dbd0c08ef9999)