qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Joel Challis	2728603fe6	Move tmk_core/common/<plat> (#13918 )	2 years ago
Danny	bf962821b3	Remove check for EH define (#7525 ) Its use in lets_split_eh was factored out in https://github.com/qmk/qmk_firmware/pull/6411	4 years ago
ai03	9bea41c9b2	[Keyboard] Add Orbit keyboard (#5306 ) * Get things working except indicators * Attempt to get things working * hmm * Compiles but doesn't run * Make data transfer work * Get all indicators working * Remove old transport * Prepare for pullreq * Revert keymap from testing to production * Final error checking for pull request * Remove autogenerated is_command from config.h * Rewrite pin toggles using qmk functions	5 years ago
James Churchill	28929ad017	Simplify split_common Code significantly (#4772 ) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.	5 years ago
James Churchill	563ce3f225	Add explicit eeprom include in split_common Fixes builds that set EE_HANDS.	5 years ago
James Churchill	38e01a7480	Convert split_common to use generic GPIO api	5 years ago
Drashna Jaelre	6b46c06018	Fix Split Common Split_util.c typo	5 years ago
Danny	c0859ac096	Update split keyboard docs (#4735 ) * Remove unused I2C_MASTER_RIGHT setting * Update documentation about split keyboard options	5 years ago
Takeshi ISHII	72d4e4bfd7	Replace serial.c of quantum/split_common/ (#4669 ) * Add provisional Helix implementation to test the quantum/split_common. * copy keyboards/helix/serial.[ch] to quantum/split_common/ * Make serial.c a pure driver. Remove buffer name and buffer size from serial.c. They should be placed in the caller(matrix.c, split_utils.c). * remove quantum/split_common/serial_backward_compatibility.h * Changed array serial_master_buffer to structure serial_m2s_buffer. * Changed array serial_slave_buffer to structure serial_s2m_buffer. * Change keyboards/miniaxe/matrix.c I also made changes to quantum/split_comon/matrix.c to keyboards/miniaxe/matrix.c. Note: I contacted @ka2hiro, creator of miniaxe, and I got permission to change keyboards/miniaxe/matrix.c. * update history comment in quantum/split_common/serial.c * Revert "Add provisional Helix implementation to test the quantum/split_common." This reverts commit `168c82ef82`. * fix keyboards/miniaxe/matrix.c, quantum/split_common/matrix.c avr-gcc 4.9.[23] report error. avr-gcc 5.4.0, avr-gcc 7.3.0 pass. It is funny. * update comment quantum/split_common/serial.c * Reserve RGBLIGHT_SPLIT macro in quantum/split_common	5 years ago
Drashna Jaelre	f1529e74c4	Remove old declaration Co-Authored-By: nooges <nooges@users.noreply.github.com>	5 years ago
Danny Nguyen	a5fa75fcb3	Move disable JTAG code from `keyboard_init` to `keyboard_setup` This way all split keyboards are using that code instead of just those using split_common with the fix	5 years ago
Drashna Jaelre	f63c0b7844	Add pointer(?) to disable_JTAG to prevent compiler errors (#4310 )	5 years ago
That-Canadian	5630ad7604	Added JTAG disable code to the split_common (#4309 ) Added JTAG disable code to the split_common slave code since the slave never calls keyboard_init(). In the future the slave should likely be modified to call keyboard_init() in some way, but without calling any of the unnecessary USB initialization code.	5 years ago
Chiang Fong Lee	7d2d0c6795	split_common: fix backlight update for serial boards	5 years ago
That-Canadian	a012113d63	Split common (#3429 ) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN" * Fixed split_common assuming I2C for RGB and Backlight. Added serial backlight support (stole from bakingpy's Levinson code ;) ) Serial RGB not implemented yet. Also Added "USE_IC2" to the lets_split_eh/eh as that was looked over. * Fixed stupid mistake, forgot to set BACKLIT_DIRTY to false after setting slave backlit settings for serial * Updated backlight data block to be cleaner (thanks drashna ;) )	5 years ago
That-Canadian	0fab3bbde3	Lets split eh (#3120 ) * Line ending stuff again * Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C) * Added personal keymap, updated some of the EH files * Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional * Added split code from lets_split, removed pro micro imports and LED code THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT * Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now * Updated eh.c * More rework of the I2C code, added global flags for split boards. * Introduced RGB over I2C, having weird edge case issues at the moment though * Fixed weird I2C edgecase with RGB, although still would like to track down route cause.. * Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C * Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed. - Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix - Split keyboard files placed into quantum/split_common/ - Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand - Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed * Updated documentation for the new makefile options and #defines specific to split keyboards * Added a bit more info to docs, so people aren't confused * Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder * Removed some debugging from eh.c * Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap). * Added a README file to the Let's Split Eh? * Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c * Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions. * Fixed lets_split_eh not having a default version * Removed "eh" references from lets_split folder for now * Took lets_split folder from master to fix travis build errors, weird my local was overriding. * Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others * Removed rules.mk from my lets_split keymap, not needed * Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"	5 years ago

3 Commits (2728603fe6d73e805a539d337fd01051c46ca806)