* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta

* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* Convert to config

* revert changes

* V-USB: Use structs for USB descriptors

* Update usbconfigs

* cformat pass

* V-USB: Use manufacturer and product strings from config.h

* Update board configs

* Fix LED configuration for PS2AVRGB boards

* Undo backlight on state changes

* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize

* Remove custom matrix from PS2AVRGB boards

* Add custom backlight.c to SRC for bminiex, for now

* Add missing DIODE_DIRECTIONs

* Update atmega32a readme files to match template

* Update atmega32a readme files to match template - fixes

* Apply suggestions from code review

* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now

* Convert remaining PS2AVRGB boards to I2C WS2812 driver

* Add back functions to make the custom matrices happy

* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition

* give ps2avrgb a specific readme

* add homebrew and crosspack avr step

* update readme of all ps2avrgb boards to reflect the new template

* Add some explanation as to what the b.fake is and some formatting fixes

* Change K37 to K57

* Add a 60_ansi layout

- Change all KEYMAP to LAYOUT
- Add info.json
- Add QMK_KEYBOARD_H

* Add mechmerlin keymap and readme for facew board

* Fix keymap
- Backspace as on the wrong key
- HHKB backspace changed to backslash

* Update keymap.c

Change TO to TG for toggle.

If BACKLIGHT_ENABLE is set to `yes` in `rules.mk`, then the user
can use the `BL_*` keycodes to adjust the backlight. At the moment,
only on/off is supported.

* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title

* move underglow led count from parent to child

* Added pearl support

* Added personal keymap for pearl

* start splitting up ps2avrGB boards

* clean up ps2avrgb boards

* Move keycodes to their own section

* Clarify `KC_PWR` vs `KC_POWER`. Fixes #1994.

*  Cleaned uppersonal userspace and keymaps (#1998)

* Cleanup of keymaps

* Remove Tap Dance from Orthodox keymap

* Cleaned up userspace and keymaps

* Added sample (template)userspace files to my folder

* Document the Teensy hardware reset problem

* add mfluid keymap to atreus62

* Update hand_wire.md

Change "Resin" to "Rosin"

* Add keyboard: mt40 (#2001)

* add keyboard: chinese planck clone

* rename chinese_planck to mt40

* add image for the mt40 board

* lets_split: Fix matrix_init for ROW2COL

Signed-off-by: Marian Rusu <rusumarian91@gmail.com>

* Add Keymap for Whitefox Truefox layout

* Add keyboard: ACR60 (#1999)

* base acr60 keyboard folder created

* mitch acr60 keymap updates, documentation

* latest keymap updates

* slight modifications to layer switching

* Changes to Atreus and Ergodox EZ Dvorak 42key layout (#1997)

* importing 42 key dvorak layout

* added comment for build instructions

* adding atreus dvorak 42 key layout

* added readme

* add readme

* build instructions

* additional MEH shortcuts

* added shifted symbols on symbols layer

* working extra symbols on COMBINED layer

* bring atreus layout inline with the ergodox one

* add necessary macros

* working ls macro

* added more shell macros

* added screen rename / screen number macros

* add ctrl-a key in shell-nav to use screen more easily

* added shell screen layer

* assign screen switching macros to screen layer

* define all screen switching macros

* more screen-related shortcuts added on shell screen layer

* change shell nav bottom right row to match base layer (backspace / delete)

* remove some mappings on SHELL_NAV layer as they are now in the screen layer

* added more screen macros

* changes to COMBINED layer (pipe on the right) and modified shell nav

* moved pipe/backslash to then right

* documented SHELL_SCREEN layer

* put backspace/delete on SHELL_NAV layer

* add an explicit lisence file for github to pickup

* Updated keymaps to allow base layer alternation for QWERTY, Colemak & Dvorak (#1962)

* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware

* Fix terminus_mini & nyquist/DivergeJM readme files

Previously an outdated copy of the default readme. Updated to match the  Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)

* Update makefiles to rules.mk

Renamed both Makefiles to rules.mk, removed references to makefiles

* Updated rules.mk

Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.

Also disabled Tap_Dance in both rules.mk files

* Moved terminus_mini to handwired

Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.

* New Frosty Flake layout for QFR TKL

Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.

* README fix & keymap update for 3 keyboards

Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.

Added TAPPING_TERM =  150 to config.h for all keyboards

Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.

* Update readme for QFR_JM to include make instructions

* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"

This reverts commit a45f264ada, reversing
changes made to 62349c3341.

* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""

This reverts commit eae54fb3be.

* Added QWERTY support to the QFR_JM

Implemented variable default base layer from the Planck default keymap.

* Update README to reflect QWERTY support

* Nyquist:DivergeJM - Update RESET location

Add a reset button to both hands, accessible when halves are disconnected.

* Typo fix

* Update DivergeJM

Switched master to Left hand,
Moved Reset key to a different location

* Added macros to send R pointer & dplyr pipe

Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.

* Added ADJUST -> QWERTY, DVORAK, COLEMAK

Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.

Updated ReadMe files accordingly.

* Fix base layout diagram for Terminus_Mini

Remove split from diagram

* Changed the R operators to SEND_STRING, rather than keypress macros

* Added Dvorak to the QFR_JM keymap

* fixed duplicate row in Nyquist keymap

* Fix readme - LAlt location on mouse layer

* Set EE_HANDS to allow either Nyquist hand to work as master.

* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM

"<-" to " <- "
"%>%" to " %>% "

Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.

* Update bottom alpha row to output symbols on LOWER

This row now outputs the following (z -> /) when in the LOWER layer:
 <-
 %>%
{
[
`
|
]
}
.
/

* Updated readme files for QFR_JM, terminus_mini & DivergeJM

QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.

* Add media keys to QFR_JM LOWER - Replicate QFR default functionality

* Fix issue with Mouse layering

Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.

* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM

* Add "KC_MAKE" to userspace example

* QMK DFU bootloader generation (#2009)

* adds :bootloader target

* update planck and preonic revisions

* remove references to .h files for planck

* update preonic keymap

* only add keyboard.h files that exist

* add production target

* hook things up with the new lufa variables

* update rules for planck/preonic

* back backlight key turn of status led when pressed

* add manufacturer/product strings to bootloader

* fix push script

* Added support for let's split kailh socket version (#2010)

* Added support for socket version of the let's split

* renamed files

* socket-version-works

* fix up lets_split keymaps

* fix up lets_split keymaps

* shrink preonic by a bit

* fix lets_split keyboards

* update travis script

* update travis script

* update version silencing