qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Ryan	4791cfae1a	Remove width, height and key_count from info.json (#14274 )	2 years ago
Ryan	d5cb7de5e4	Change USBasp and bootloadHID bootloaders to lowercase (#14354 )	2 years ago
Ryan	7eea780a7d	Remove bootloader listings from rules.mk (#14330 )	2 years ago
James Young	a03aa301de	Remove Full Bootmagic (#13846 ) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta	2 years ago
James Young	1646c0f26c	2021 May 29 Breaking Changes Update (#13034 ) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only	2 years ago
Zach White	38d8d5445e	Remove KEYMAP and LAYOUT_kc (#12160 ) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc	3 years ago
Joel Challis	790f94533c	Refactor to use led config - Part 6 (#12115 ) * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * revert changes	3 years ago
Ryan	ce842f912e	Remove `DEBUG_LEVEL` from V-USB rules.mk (#9117 )	4 years ago
Joel Challis	854d46f833	Disable console on vusb boards using mouse/extra (#8625 )	4 years ago
Ryan	51a81813b0	V-USB: Consolidate usbconfig.h's into a single file (#8584 )	4 years ago
Ryan	14079ce698	V-USB: Use structs for USB descriptors (#8572 ) * V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass	4 years ago
Ryan	4d76d85d7b	V-USB: Use manufacturer and product strings from config.h (#7797 ) * V-USB: Use manufacturer and product strings from config.h * Update board configs	4 years ago
Ryan	5e3951b361	Remove NO_UART defines from config.h for V-USB boards (#8351 )	4 years ago
fauxpark	b568999769	Fix LED configuration for PS2AVRGB boards (#7989 ) * Fix LED configuration for PS2AVRGB boards * Undo backlight on state changes	4 years ago
fauxpark	f5209aa4e9	Remove custom backlight code for PS2AVRGB boards (#7775 ) * Remove custom backlight code for PS2AVRGB boards * Remove custom driver setting * BACKLIGHT_BREATHING goes in config.h, not here * Don't need to include backlight.c again here either * Turn on backlight for Canoe * Disable console on a few boards due to oversize	4 years ago
fauxpark	2557bc8e6f	Remove custom matrix from PS2AVRGB boards (#7396 ) * Remove custom matrix from PS2AVRGB boards * Add custom backlight.c to SRC for bminiex, for now * Add missing DIODE_DIRECTIONs	4 years ago
Joel Challis	6a8c0a6468	[Keyboard] Update ATmega32A readme files to match template (#7462 ) * Update atmega32a readme files to match template * Update atmega32a readme files to match template - fixes * Apply suggestions from code review	4 years ago
fauxpark	519df78cdb	Set device version from config.h for V-USB boards (#7316 )	4 years ago
fauxpark	3047335729	Add support for configurable polling interval and power usage o… (#7336 ) * Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now	4 years ago
fauxpark	3a215195ed	Convert remaining PS2AVRGB boards to I2C WS2812 driver (#7245 ) * Convert remaining PS2AVRGB boards to I2C WS2812 driver * Add back functions to make the custom matrices happy	4 years ago
Rys Sommefeldt	38353688f2	[Keymap] Add personal JC65 v32a layout (#7244 ) * Add personal JC65 v32a layout * Update keyboards/jc65/v32a/keymaps/rys/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com>	4 years ago
fauxpark	de4a47f1cc	Cleanup rules.mk for 32A and 328P keyboards (#6767 )	4 years ago
fauxpark	0bd03150e5	Remove NO_BACKLIGHT_CLOCK (#6418 )	4 years ago
Peter Tillemans	32952d8624	Pti keymaps (#6025 ) * created new folder to port my old layout * removed Colemak, enabled backlight. * fixed backlight support * added Ctrl/Esc + Shift/Enter double function keys * made planck compatible with Atreus board, including docs * enable backlight control * make planck more compatible with atreus layout * migrate to qwerty and separate alt-space * adding ok64 and redox layouts * fix dot in numerical pad * fix dot in dvorak layout * added redox and pro micro version of snampad * add arrows on right mod keys and map PrtScr on Fn P * add keys to swap between mac and windows * added escape to redox layout * added printscreen key * moved layout closer to what I am used to. * swap spc and bspc, add ctrl to quot * qwertified atreus layout * fix for compile errors when RGB or BACKLIGHT disabled * add customized keymap for the m65a * Reverted unintended change in default keymap. * Remove unused code in my keymap and modernized tap hold keys * Update keyboards/snampad/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/snampad.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/keymaps/default/config.h Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/keymaps/default/keymap.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/planck/keymaps/ptillemans/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/jc65/v32a/keymaps/ptillemans/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/snampad/snampad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * cleanup snampad layout * Update keyboards/snampad/snampad.c Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * further mmended cleaning - removed obsolete Backspace handling in jc65 keymap - improved shift detection - modernized planck keymap - added details to snampad readme - other recommended refactors in snampad	5 years ago
Peter Tillemans	88966767ee	[Keyboard] Fix jc65 when RGB or BACKLIGHT disabled (#6022 )	5 years ago
Drashna Jaelre	b05c0e46c6	Adds a default value for IS_COMMAND for COMMAND feature (#4301 ) * Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition	5 years ago
Jeremy Bernhardt	c8cbee5d71	Modified URLs to point to new locations	5 years ago
Drashna Jaelre	a495326aed	Turn off Mousekeys for several ps2avrGB keyboards (#4502 ) * Turn off Mousekeys for jc65 * Turn off Mousekeys for ps2avrGB templates * Disable mousekeys for bmini and canoe as well	5 years ago
Drashna Jaelre	31afdd81a1	Optimize size of JC65/v32a keyboard	5 years ago
MechMerlin	9c35c5979c	Update JC65 Readme (#3384 )	5 years ago
noroadsleft	ac05cdd1f8	JC65 Refactor and Configurator update (#3239 ) * Add Configurator support for JC65 v32a (ps2avrgb) version * JC65 Keymap refactor	5 years ago
skullY	f10a0ae547	Remove bootloader from info.jsons	6 years ago
MechMerlin	1f77868427	More Configurator Warning Fixes (#2716 ) * mf68_ble did not have the correct .c and .h files * Fix JC65 KEYMAP to LAYOUT * Change KEYMAP to LAYOUT for s60_x * Convert KEYMAP to LAYOUT for lets_split boards * Convert KEYMAP to LAYOUT * more fixes to keymap for iris * convert KEYMAP to LAYOUT for levinson keyboard * change losinggeneration's KEYMAP to LAYOUT * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for nyquist * convert KEYMAP to LAYOUT * convert KEYMAP to LAYOUT for viterbi * convert KEYMAP to LAYOUT * convert KEYMAP and its subsidiries to the LAYOUT standard * convert KEYMAP and its subsidiries to the new LAYOUT standard	6 years ago
skullydazed	f4a9e98383	Pull information from config.h and rules.mk (#2711 ) * Pull information from config.h and rules.mk * Readd the kbd75 maintainer	6 years ago
MechMerlin	fa0d97a37f	info.json configurator support for popular 65% keyboards (#2589 ) * Support for tada68 ansi layout. Avoiding the iso layout as it doesn't seem correct * whitefox support for configurator * configurator support for jc65 PCB featuring both the qmk and ps2avrgb versions	6 years ago
Jason Barnachea	0e92d99cdc	Readme img link updates (#2410 ) * QMK and JC65 pcb img links updated link fixes * personal keymap updates new v32u4 keymap, updated v32a keymap * Update readme.md	6 years ago
Jason Barnachea	a972b26274	Add JC65 ps2avrGB keyboard (#2351 ) * Adds JC65 ps2avrGB keyboard * Adds default keymap * Adds personal keymap * Backlight On/off support Migrated code from the BFake. Functionality only on BL_ON, BL_OFF, BL_TOGG. * Backlighting config adjustment Only 1 level supported. * Personal keymap update BL toggle added and RGB layer updates. * Renamed jc65 ps2avrgb directory Renamed directory for more clarity. * Default keymap and default rules * Personal keymap and personal rules * Group JC65 QMK and PS2 versions Group JC65 QMK and PS2 versions, Split directories, Readme for parent folder. * Default keycaps and personal keymaps re-added Default and personal keymaps re-added. Keymaps, Readme, Rules.mk, and config.h * v32a default keymap rules Default to no. * RGB and Backlight default settings Set to yes. * Rules.mk defaults for personal keymap Rules.mk defaults for personal keymap * Revised keyboard readme make paths Revised. * Path correction * jc65 default folder set set default pcb to qmk version * default rules for v32a set to enable backlight and rgb by default.	6 years ago

36 Commits (6b299fab6e6a3143c061b9ea005253361fcd524b)