qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Ryan	6b74e48f81	Remove audio pin references in rules.mk (#14532 )	2 years ago
Ryan	5af1799735	Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379 )	2 years ago
Ryan	4791cfae1a	Remove width, height and key_count from info.json (#14274 )	2 years ago
Ryan	7eea780a7d	Remove bootloader listings from rules.mk (#14330 )	2 years ago
James Young	4b453dca92	Remove MIDI Configuration boilerplate (#11151 ) * remove keyboard-level instances of `MIDI_ENABLE = no` Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e '/^[ #]MIDI_ENABLE[ \t]=[ \t]no/d' {} + ``` Co-Authored-By: Nick Brassel <nick@tzarc.org> fix case-sensitivity issues on MIDI_ENABLE Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;MIDI_ENABLE[ \t]=[ \t][Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} + ``` * replace `# MIDI controls` with `# MIDI support` Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]MIDI[ \t]\(controls\\|support\).;# MIDI support;g' {} + ``` align inline comments Aligns the inline comments to the length used by the QMK AVR rules.mk template. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;MIDI_ENABLE = yes.;MIDI_ENABLE = yes # MIDI support;g' {} + ``` remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#\([ \t]MIDI_ENABLE\) = yes; \1 = no ;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;^\([ \t]\)\(MIDI_ENABLE = no\);\2\1;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e '/^[ #]\+MIDI_ENABLE = no/d' {} + ``` * remove MIDI configuration boilerplate from keyboard config.h files Co-authored-by: Nick Brassel <nick@tzarc.org>	2 years ago
James Young	a03aa301de	Remove Full Bootmagic (#13846 ) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta	2 years ago
James Young	1646c0f26c	2021 May 29 Breaking Changes Update (#13034 ) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only	2 years ago
Drashna Jaelre	a0fed0ea17	Convert Encoder callbacks to be boolean functions (#12805 ) Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>	3 years ago
James Young	2e50b34c67	Add missing info.json files for keyboards (#12239 ) Recent changes to QMK Configurator's API have made it so an info.json file is required for QMK Configurator to know how to render the keyboard in question. This PR adds info.json files for keyboards that did not have them, with a few exceptions for boards whose layouts I was unable to determine. * add info.json file for 2key2crawl * add info.json file for 40percentclub/4x4 * add info.json file for 40percentclub/5x5 * add info.json file for 4pplet/aekiso60/rev_a * add info.json file for 4pplet/steezy60/rev_a * add info.json file for 6ball * add info.json file for 7c8/framework * add info.json file for aeboards/constellation * add info.json file for alpine65 * add info.json file for aplyard/aplx6 * add info.json file for arch_36 * add info.json file for arisu * add info.json file for box75 * add info.json file for butterstick * add info.json file for four_banger * add info.json file for geekboards/tester * add info.json file for handwired/2x5keypad * add info.json file for handwired/412_64 * add info.json file for handwired/42 * add info.json file for handwired/aplx2 * add info.json file for handwired/brain * add info.json file for handwired/cans12er * add info.json file for handwired/ck4x4 * add info.json file for handwired/d48 * add info.json file for handwired/dactyl_manuform/dmote/62key * add info.json file for handwired/daishi * add info.json file for handwired/hexon38 * add info.json file for handwired/jot50 * add info.json file for handwired/jotanck * add info.json file for handwired/jotpad16 * add info.json file for handwired/k8split * add info.json file for handwired/myskeeb * add info.json file for handwired/nicekey * add info.json file for handwired/onekey * add info.json file for handwired/postageboard * add info.json file for handwired/riblee_f401 * add info.json file for handwired/riblee_f411 * add info.json file for handwired/rs60 * add info.json file for handwired/splittest * add info.json file for handwired/trackpoint * add info.json file for handwired/traveller * add info.json file for hhkb_lite_2 * add info.json file for honeycomb * add info.json file for ivy/rev1 * add info.json file for keebio/viterbi * add info.json file for laptreus * add info.json file for latin47ble * add info.json file for latin64ble * add info.json file for launchpad/rev1 * add info.json file for lets_split_eh/eh * add info.json file for mechmini/v1 * add info.json file for meira * add info.json file for meishi * add info.json file for merge/iso_macro * add info.json file for mschwingen/modelm * add info.json file for pabile/p20 * add info.json files for pimentoso/paddino02 rev1, rev2/left, and rev2/right * add info.json file for rgbkb/pan * add info.json files for runner3680 3x6, 3x7, 3x8, 4x6, 4x7, 4x8, 5x6, 5x7, and 5x8 * add info.json file for sck/gtm * add info.json file for splitish * add info.json file for standaside * add info.json file for ungodly/launch_pad * add info.json file for xelus/trinityxttkl * Revert "add info.json file for rgbkb/pan" This reverts commit `280b89bc61`. * correct maintainer for ivy/rev1	3 years ago
Drashna Jaelre	7161d65070	Remove FAUXCLICKY feature (deprecated) (#11829 )	3 years ago
Ryan	4ed67d666e	Remove `DESCRIPTION`, N-Q (#11631 )	3 years ago
Zach White	2a67ff690e	clean up generate-api errors	3 years ago
Zach White	c0dcee96a8	Initial list of keyboards to exclude from CI (#11213 )	3 years ago
James Young	c66df16644	2020 November 28 Breaking Changes Update (#11053 ) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change	3 years ago
pabile	741856dd57	[Keyboard] add P40 Ortho, P42, and P20 ver2 by pabile (#9980 ) * Add files via upload * removed * Add files via upload * Rename pabile40.c to p40.c * Rename pabile40.h to p40.h * Add files via upload * Update p40.c * Update p40.h * Update README.md * Update README.md * Update README.md * Update README.md * Updated readme file * Updated readme file * Add files via upload * modified: keyboards/pabile/p18/config.h modified: keyboards/pabile/p18/keymaps/default/keymap.c modified: keyboards/pabile/p18/p18.h modified: keyboards/pabile/p18/rules.mk modified: keyboards/pabile/p40/config.h modified: keyboards/pabile/p40/keymaps/default/keymap.c * config update * Delete README.md.save * Delete keymap.c.save * Delete keymaps.c * modified: keyboards/pabile/p18/keymaps/default/keymap.c * Update p18.h * testing layout config * Create info.json * Create info.json * Create readme.md * Update readme.md * Updated description * Updated description * Update config.h updated vendor ID to 0000 * Update keymap.c removed unnecessary comments * Update keyboards/pabile/p18/p18.h Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p18/p18.h Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update p18.h removed unnecessary comments * Update keyboards/pabile/p18/rules.mk Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p18/rules.mk Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update config.h updated vendor id and removed unnecessary comments * Update keyboards/pabile/p40/info.json Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p40/keymaps/default/keymap.c Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p40/p40.h Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p40/p40.h Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p40/p40.h Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p40/rules.mk Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Update keyboards/pabile/p40/rules.mk Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com> * Added p20 macropad * Update README.md * Updated VID and PID * Updated VID and PID * Update rules.mk * Update config.h * Update config.h * Update config.h * Update keymap.c * Replaced blank keys with KC_NO * Update keyboards/pabile/p18/keymaps/default/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p18/p18.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p18/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p20/keymaps/default/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keymap.c * Update keymap.c * Update keyboards/pabile/p20/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p40/info.json Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p20/p20.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Updated product ID * Updated product ID * Update keyboards/pabile/p20/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/p20.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/p20.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p18/readme.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/README.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40/README.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p18/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p18/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p18/readme.md Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Changed to lowercase filename * Rename README.md to readme.md * Update keyboards/pabile/p18/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Add files via upload * typo * New keyboard * Updated image link * Updated default ortho keymap * Update keymap.c * Update readme.md * Update keymap.c * Update keymap.c * default firmware * Delete pabile_p40_ortho.hex * Update keymap.c added KC_SPC to make keymap compatible with both grid and MIT. keymap is designed for MIT. * Update keymap.c * Update info.json added MIT layout * Update p40.h added MIT layout option * Added support for version 2 PCB New/corrected pin locations. (Backlight) LED pin now on B6. Up to 3 rotary encoder support. * Update readme.md update for PCB v2 * Update readme.md updated link * Update readme.md * Update readme.md * Update readme.md * Update config.h removed backlight pins * Update keymap.c added encoder. simplified layout. * Update keymap.c * Update p42.h * Update keymap.c simplified * Update keymap.c * Update readme.md replaced photo * Added new keyboard Initially placed under p40. separated as a new keyboard following an advise from gh. * start rename * removed old folder * reverted to last merge * revert to last merge * Update p40.h reverted to last merge * Update keymap.c * Update keymap.c removed encoder support * Update config.h removed encoder support * Update config.h removed encoder support * Update keymap.c removed encoder support * Update readme.md removed encoder support * Update info.json * Update keymap.c * Update keymap.c * Update keyboards/pabile/p20/rules.mk added numpad option Co-authored-by: Drashna Jaelre <drashna@live.com> * added numpad option * Update keyboards/pabile/p40/keymaps/ortho/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p18/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p20/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * moved to p40_ortho keyboard rather than a keymap * moved to p40_ortho keyboard rather than a keymap * moved to p40_ortho keyboard rather than a keymap * Update config.h Added copyright details. * Update keyboards/pabile/p20/p20.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p20/p20.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keymap.c alignment * Update keyboards/pabile/p42/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/info.json Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/p42.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/p40_ortho.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/p40_ortho.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/info.json Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/config.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p40_ortho/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p20/keymaps/ver2/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update config.h Added copyright statement * Update config.h Added copyright statement * Update config.h Added license header * Update keymap.c Added license header * Update p20.h Added license header * Update p40_ortho.c Added license header * Update p40_ortho.h Added license header * Update keymap.c Added license header * Update keyboards/pabile/p42/rules.mk Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keymap.c Updated LAYOUT to LAYOUT_default in response to Run failed: PR Lint keyboards - master (`0f278a2`) * Update p42.h Updated LAYOUT to LAYOUT_default in response to Run failed: PR Lint keyboards - master (`0f278a2`) * Update p42.h Added license header * Update keyboards/pabile/p42/p42.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/pabile/p42/keymaps/default/keymap.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * add pabile/p20/ver2 * add missing license header * Update keyboards/pabile/p20/ver2/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/pabile/p20/ver1/ver1.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: root <root@HP8200.localdomain> Co-authored-by: ridingqwerty <george.g.koenig@gmail.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>	3 years ago
pabile	d15a60d2d3	[Keyboard] Add P40, P20 and P18 Keyboards by pabile (#8759 ) * Add files via upload * removed * Add files via upload * Rename pabile40.c to p40.c * Rename pabile40.h to p40.h * Add files via upload * Update p40.c * Update p40.h * Update README.md * Update README.md * Update README.md * Update README.md * Updated readme file * Updated readme file * Add files via upload * modified: keyboards/pabile/p18/config.h modified: keyboards/pabile/p18/keymaps/default/keymap.c modified: keyboards/pabile/p18/p18.h modified: keyboards/pabile/p18/rules.mk modified: keyboards/pabile/p40/config.h modified: keyboards/pabile/p40/keymaps/default/keymap.c * config update * Delete README.md.save * Delete keymap.c.save * Delete keymaps.c * modified: keyboards/pabile/p18/keymaps/default/keymap.c * Update p18.h * testing layout config * Create info.json * Create info.json * Create readme.md * Update readme.md * Updated description * Updated description * Update config.h updated vendor ID to 0000 * Update keymap.c removed unnecessary comments * Update keyboards/pabile/p18/p18.h * Update keyboards/pabile/p18/p18.h * Update p18.h removed unnecessary comments * Update keyboards/pabile/p18/rules.mk * Update keyboards/pabile/p18/rules.mk * Update config.h updated vendor id and removed unnecessary comments * Update keyboards/pabile/p40/info.json * Update keyboards/pabile/p40/keymaps/default/keymap.c * Update keyboards/pabile/p40/p40.h * Update keyboards/pabile/p40/p40.h * Update keyboards/pabile/p40/p40.h * Update keyboards/pabile/p40/rules.mk * Update keyboards/pabile/p40/rules.mk * Added p20 macropad * Update README.md * Updated VID and PID * Updated VID and PID * Update rules.mk * Update config.h * Update config.h * Update config.h * Update keymap.c * Replaced blank keys with KC_NO * Update keyboards/pabile/p18/keymaps/default/keymap.c * Update keyboards/pabile/p18/p18.h * Update keyboards/pabile/p18/rules.mk * Update keyboards/pabile/p20/keymaps/default/keymap.c * Update keymap.c * Update keymap.c * Update keyboards/pabile/p20/rules.mk * Update keyboards/pabile/p40/info.json * Update keyboards/pabile/p20/p20.h * Updated product ID * Updated product ID * Update keyboards/pabile/p20/config.h * Update keyboards/pabile/p20/p20.h * Update keyboards/pabile/p20/p20.h * Update keyboards/pabile/p20/keymaps/default/keymap.c * Update keyboards/pabile/p18/readme.md * Update keyboards/pabile/p20/README.md * Update keyboards/pabile/p20/rules.mk * Update keyboards/pabile/p20/rules.mk * Update keyboards/pabile/p20/rules.mk * Update keyboards/pabile/p20/rules.mk * Update keyboards/pabile/p40/README.md * Update keyboards/pabile/p40/rules.mk * Update keyboards/pabile/p40/rules.mk * Update keyboards/pabile/p18/rules.mk * Update keyboards/pabile/p18/rules.mk * Update keyboards/pabile/p40/config.h * Update keyboards/pabile/p40/config.h * Update keyboards/pabile/p18/readme.md * Changed to lowercase filename * Rename README.md to readme.md * Update keyboards/pabile/p18/rules.mk	4 years ago

16 Commits (6b299fab6e6a3143c061b9ea005253361fcd524b)