qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Ryan	4791cfae1a	Remove width, height and key_count from info.json (#14274 )	2 years ago
Ryan	d5cb7de5e4	Change USBasp and bootloadHID bootloaders to lowercase (#14354 )	2 years ago
Ryan	7eea780a7d	Remove bootloader listings from rules.mk (#14330 )	2 years ago
James Young	a03aa301de	Remove Full Bootmagic (#13846 ) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta	2 years ago
Joel Challis	790f94533c	Refactor to use led config - Part 6 (#12115 ) * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * revert changes	3 years ago
Ryan	ce842f912e	Remove `DEBUG_LEVEL` from V-USB rules.mk (#9117 )	4 years ago
Joel Challis	854d46f833	Disable console on vusb boards using mouse/extra (#8625 )	4 years ago
Ryan	51a81813b0	V-USB: Consolidate usbconfig.h's into a single file (#8584 )	4 years ago
Ryan	14079ce698	V-USB: Use structs for USB descriptors (#8572 ) * V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass	4 years ago
Ryan	4d76d85d7b	V-USB: Use manufacturer and product strings from config.h (#7797 ) * V-USB: Use manufacturer and product strings from config.h * Update board configs	4 years ago
fauxpark	b568999769	Fix LED configuration for PS2AVRGB boards (#7989 ) * Fix LED configuration for PS2AVRGB boards * Undo backlight on state changes	4 years ago
fauxpark	f5209aa4e9	Remove custom backlight code for PS2AVRGB boards (#7775 ) * Remove custom backlight code for PS2AVRGB boards * Remove custom driver setting * BACKLIGHT_BREATHING goes in config.h, not here * Don't need to include backlight.c again here either * Turn on backlight for Canoe * Disable console on a few boards due to oversize	4 years ago
Joel Challis	6a8c0a6468	[Keyboard] Update ATmega32A readme files to match template (#7462 ) * Update atmega32a readme files to match template * Update atmega32a readme files to match template - fixes * Apply suggestions from code review	4 years ago
fauxpark	519df78cdb	Set device version from config.h for V-USB boards (#7316 )	4 years ago
fauxpark	3047335729	Add support for configurable polling interval and power usage o… (#7336 ) * Add support for custom polling interval and power usage on V-USB boards * Use 1ms as default for now	4 years ago
fauxpark	efa28d0f5c	Convert some PS2AVRGB boards to I2C WS2812 driver (#7241 ) * Convert some PS2AVRGB boards to I2C WS2812 driver * Fix Travis failure for bface	4 years ago
Drashna Jaelre	31fe2e0859	[Keyboard] Reduce compiled size of Panc60 keyboard (#7260 )	4 years ago
fauxpark	de4a47f1cc	Cleanup rules.mk for 32A and 328P keyboards (#6767 )	4 years ago
fauxpark	0bd03150e5	Remove NO_BACKLIGHT_CLOCK (#6418 )	4 years ago
Drashna Jaelre	faaaa134fd	Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997 )	4 years ago
MechMerlin	15d7c5f0bd	[Keyboard] Bootmagic does not actually work on BMC boards, removing from panc60 (#5573 ) * remove unneeded uart setting * use pragma once everywhere * remove custom matrix support * fixup readme * set bootmagic to lite * remove dependency on custom i2c code * use the right header files and function calls * remove bootmagic support as it doesn't work on bmc boards * readme merge artifacts removal	5 years ago
MechMerlin	5c1ef2bddc	[Keyboard] Panc60 Refactor (#5559 ) * remove unneeded uart setting * use pragma once everywhere * remove custom matrix support * fixup readme * set bootmagic to lite * remove dependency on custom i2c code * use the right header files and function calls	5 years ago
Drashna Jaelre	b05c0e46c6	Adds a default value for IS_COMMAND for COMMAND feature (#4301 ) * Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition	5 years ago
MechMerlin	5632552558	RGB Support for Panc60 (#4253 ) * add RGB underglow support * enable RGB underglow and backlighting	5 years ago
MechMerlin	57ec309d3e	Keyboard: Panc60 (#3961 ) * initial check in * figure out the column pins * temporary keymap * guess the row pins * fix matrix.c compilation errors * use the LAYOUT_60_hhkb macro and tweak the keymap a little bit * update readme * Put my name everywhere * Add QMK Configurator support * figured out the row pins * update readme to have reset info * Fill in some blanks that are documentation related * Update matrix.c * add kb functions * forego kbfirmware labeling * add arrows and caps lock to function layer. * add a LAYOUT_60 and LAYOUT_all macro * missed a comma * add configurator support for the two new LAYOUT macros * Jack helped me with a new custom matrix * add 60_ansi into rules.mk	5 years ago

25 Commits (6b299fab6e6a3143c061b9ea005253361fcd524b)