* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta

* VEA Support

* Update LEDs to use QMK methods

* Enable Backlight

* Update Vendor ID

* Updates to enable split RGB

* Update readme

* Update to split RGB

* remove unnecessary reference

* Knight animation starts at the back

* remove hardcoded variable

Co-authored-by: Major Koos <MajorKoos@noreply.users.github.com>

* Added split75 keyboard

* tidy up commented out code + removed default

* added visual map

* proper led functions. more layers for keymap

* led functions. moved mod keys to numbers

* double tapping toggle + leds on power on

* media keys fix

* clean up of commented out code and unnecessary functions. readme update.
default keymap

* removed bootloadHID file

* Update keyboards/split75/config.h

* Update keyboards/split75/config.h

* Update keyboards/split75/config.h

* Update keyboards/split75/config.h

* removed python flashing script

* Update keyboards/split75/keymaps/default/keymap.c

* Update keyboards/split75/split75.h

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/default/keymap.c

* reintroduced empty matrix_scan_user to default keymap

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/usbconfig.h

* Update keyboards/ergodone/config.h

* Update keyboards/split75/keymaps/art/keymap.c

* updated readme file

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/rules.mk

* Update keyboards/split75/split75.c

* code fix after suggestions

* defined tapping toggle as double tap

* added info.json

* Update keyboards/split75/config.h

* fix for leds not displaying properly when initialising

* Update keyboards/split75/README.md

* Update keyboards/split75/keymaps/default/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* changed product description fields

* renamed user functions

* indentation fix

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* art keymap update

* Update keyboards/split75/config.h

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/keymaps/art/keymap.c

* Update keyboards/split75/keymaps/default/keymap.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/matrix.c

* Update keyboards/split75/rules.mk

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/config.h

* Update keyboards/split75/split75.c

* disable underglow on sleep and enabled backlighting

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* Update keyboards/split75/usbconfig.h

* personal keymap update

* changed boot animation

* consistent whitespace

* Tidied up default notes and unnecessary comments

* Unique Vendor ID

* remove usb config file

* corrected manufacturer

* Update keyboards/split75/config.h

* Update keyboards/split75/README.md

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.c

* Update keyboards/split75/split75.h

* Update keyboards/split75/split75.h

* Update keyboards/split75/split75.h

* Update keyboards/split75/split75.c

* Update keyboards/split75/matrix.c

* Update keyboards/split75/matrix.c

* Update keyboards/split75/matrix.c

* Update keyboards/split75/matrix.c

* Update keyboards/split75/split75.h

* Personal keymap restore after refactor

* Moved to wheatfield folder + updated readme

* disable Console to save firmware space

* rules.mk templating

Add comments regarding the rules, to more closely match the ps2avrgb template.

* update info.json

This board has a quite interesting take on the standard TKL; why not show it off?

* Convert some PS2AVRGB boards to I2C WS2812 driver

* Fix Travis failure for bface

* initial commit of skog_lite

* add layout macro from misterkeeb's tool

* add default keymap

* add pins used

* rgb support

* add tkl ansi community support

* update readmes

* add new layouts and configurator support

* pragma once it all

* put amnesia's name everywhere

* fixup readme

* remove custom matrix

* remove unneccessary configs

* disable bootmagic

* remove custom i2c in favor of i2c_master

* fix rgb led num

* add in rgb underglow support

* Adding Singa Repo w/ Config Support

* Used Tilde instead of GRV

* PR Fixes

* oops, forgot to change the keymaps

* splitbs -> split_bs

* Stopping point at creating targets for new_project script

* Add second argument for target

* Add the ps2avrgb target

* consider the case where the firmware type target is not valid

* fix template files to be more generic

* Code cleanup

* Change variable name to be more descriptive

* make avr the default

* forgot to put the template files in

* Take out useless comments

* add usage info

If BACKLIGHT_ENABLE is set to `yes` in `rules.mk`, then the user
can use the `BL_*` keycodes to adjust the backlight. At the moment,
only on/off is supported.

* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title

* move underglow led count from parent to child

* Added pearl support

* Added personal keymap for pearl

* start splitting up ps2avrGB boards

* clean up ps2avrgb boards

* Move keycodes to their own section

* Clarify `KC_PWR` vs `KC_POWER`. Fixes #1994.

*  Cleaned uppersonal userspace and keymaps (#1998)

* Cleanup of keymaps

* Remove Tap Dance from Orthodox keymap

* Cleaned up userspace and keymaps

* Added sample (template)userspace files to my folder

* Document the Teensy hardware reset problem

* add mfluid keymap to atreus62

* Update hand_wire.md

Change "Resin" to "Rosin"

* Add keyboard: mt40 (#2001)

* add keyboard: chinese planck clone

* rename chinese_planck to mt40

* add image for the mt40 board

* lets_split: Fix matrix_init for ROW2COL

Signed-off-by: Marian Rusu <rusumarian91@gmail.com>

* Add Keymap for Whitefox Truefox layout

* Add keyboard: ACR60 (#1999)

* base acr60 keyboard folder created

* mitch acr60 keymap updates, documentation

* latest keymap updates

* slight modifications to layer switching

* Changes to Atreus and Ergodox EZ Dvorak 42key layout (#1997)

* importing 42 key dvorak layout

* added comment for build instructions

* adding atreus dvorak 42 key layout

* added readme

* add readme

* build instructions

* additional MEH shortcuts

* added shifted symbols on symbols layer

* working extra symbols on COMBINED layer

* bring atreus layout inline with the ergodox one

* add necessary macros

* working ls macro

* added more shell macros

* added screen rename / screen number macros

* add ctrl-a key in shell-nav to use screen more easily

* added shell screen layer

* assign screen switching macros to screen layer

* define all screen switching macros

* more screen-related shortcuts added on shell screen layer

* change shell nav bottom right row to match base layer (backspace / delete)

* remove some mappings on SHELL_NAV layer as they are now in the screen layer

* added more screen macros

* changes to COMBINED layer (pipe on the right) and modified shell nav

* moved pipe/backslash to then right

* documented SHELL_SCREEN layer

* put backspace/delete on SHELL_NAV layer

* add an explicit lisence file for github to pickup

* Updated keymaps to allow base layer alternation for QWERTY, Colemak & Dvorak (#1962)

* First commit of the Terminus_Mini firmware and the DivergeJM version of the Nyquist firmware

* Fix terminus_mini & nyquist/DivergeJM readme files

Previously an outdated copy of the default readme. Updated to match the  Nyquist/DivergeJM format (DivergeJM is a split 5x12 implementation of the terminus_mini layout)

* Update makefiles to rules.mk

Renamed both Makefiles to rules.mk, removed references to makefiles

* Updated rules.mk

Inadvertantly removed important code from the rules.mk in previous commit. This has been restored.

Also disabled Tap_Dance in both rules.mk files

* Moved terminus_mini to handwired

Realised that existing directory was not appropriate for the terminus_mini project, moved to handwired.

* New Frosty Flake layout for QFR TKL

Added a TKL layout for the Frosty Flake with a navigation cluster on LOWER under the left hand and a similarly functioning MOUSE layer that includes mouse navigation functionality.

* README fix & keymap update for 3 keyboards

Fixed the markdown for the handwired/terminus_mini:default, Nyqyist:DivergeJM & frosty_flake:QFR_JM.

Added TAPPING_TERM =  150 to config.h for all keyboards

Switched LT(LOWER) and LAlt on the mod row for ortholinear boards.

* Update readme for QFR_JM to include make instructions

* Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware"

This reverts commit a45f264ada, reversing
changes made to 62349c3341.

* Revert "Revert "Merge branch 'master' of https://github.com/mogranjm/qmk_firmware""

This reverts commit eae54fb3be.

* Added QWERTY support to the QFR_JM

Implemented variable default base layer from the Planck default keymap.

* Update README to reflect QWERTY support

* Nyquist:DivergeJM - Update RESET location

Add a reset button to both hands, accessible when halves are disconnected.

* Typo fix

* Update DivergeJM

Switched master to Left hand,
Moved Reset key to a different location

* Added macros to send R pointer & dplyr pipe

Macros added as a string of keypresses, couldn't figure out how to get SEND_STRING to work.

* Added ADJUST -> QWERTY, DVORAK, COLEMAK

Re-implemented update_tri_layer fuctionality to reset base layer for Terminus_Mini & DivergeJM Nyquist keymaps to QWERTY, DVORAK or COLEMAK via the ADJUST layer.

Updated ReadMe files accordingly.

* Fix base layout diagram for Terminus_Mini

Remove split from diagram

* Changed the R operators to SEND_STRING, rather than keypress macros

* Added Dvorak to the QFR_JM keymap

* fixed duplicate row in Nyquist keymap

* Fix readme - LAlt location on mouse layer

* Set EE_HANDS to allow either Nyquist hand to work as master.

* Update R operator strings, clean up layering for terminus_mini, QFR_JM and DivergeJM

"<-" to " <- "
"%>%" to " %>% "

Also played around with the layering, removed unnecessary TAP_TOGGLE for LOWER and shuffled FUNCTION and MOUSE momentary actions to reflect layer order.

* Update bottom alpha row to output symbols on LOWER

This row now outputs the following (z -> /) when in the LOWER layer:
 <-
 %>%
{
[
`
|
]
}
.
/

* Updated readme files for QFR_JM, terminus_mini & DivergeJM

QFR_JM readme reflects correct LOWER bottom row symbol output,
terminus_mini & DivergeJM reflect correct command line make instructions.

* Add media keys to QFR_JM LOWER - Replicate QFR default functionality

* Fix issue with Mouse layering

Stuck on mouse layer because the wrong macro was assigned to the 'exit layer' key. Reassigned that key.

* Changed " <- " to "<- " for QFR_JM, terminus_mini & DivergeJM

* Add "KC_MAKE" to userspace example

* QMK DFU bootloader generation (#2009)

* adds :bootloader target

* update planck and preonic revisions

* remove references to .h files for planck

* update preonic keymap

* only add keyboard.h files that exist

* add production target

* hook things up with the new lufa variables

* update rules for planck/preonic

* back backlight key turn of status led when pressed

* add manufacturer/product strings to bootloader

* fix push script

* Added support for let's split kailh socket version (#2010)

* Added support for socket version of the let's split

* renamed files

* socket-version-works

* fix up lets_split keymaps

* fix up lets_split keymaps

* shrink preonic by a bit

* fix lets_split keyboards

* update travis script

* update travis script

* update version silencing