* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Alex <alex@turncommerce.com>

Recent changes to QMK Configurator's API have made it so an info.json file is required for QMK Configurator to know how to render the keyboard in question.

This PR adds info.json files for keyboards that did not have them, with a few exceptions for boards whose layouts I was unable to determine.

* add info.json file for 2key2crawl

* add info.json file for 40percentclub/4x4

* add info.json file for 40percentclub/5x5

* add info.json file for 4pplet/aekiso60/rev_a

* add info.json file for 4pplet/steezy60/rev_a

* add info.json file for 6ball

* add info.json file for 7c8/framework

* add info.json file for aeboards/constellation

* add info.json file for alpine65

* add info.json file for aplyard/aplx6

* add info.json file for arch_36

* add info.json file for arisu

* add info.json file for box75

* add info.json file for butterstick

* add info.json file for four_banger

* add info.json file for geekboards/tester

* add info.json file for handwired/2x5keypad

* add info.json file for handwired/412_64

* add info.json file for handwired/42

* add info.json file for handwired/aplx2

* add info.json file for handwired/brain

* add info.json file for handwired/cans12er

* add info.json file for handwired/ck4x4

* add info.json file for handwired/d48

* add info.json file for handwired/dactyl_manuform/dmote/62key

* add info.json file for handwired/daishi

* add info.json file for handwired/hexon38

* add info.json file for handwired/jot50

* add info.json file for handwired/jotanck

* add info.json file for handwired/jotpad16

* add info.json file for handwired/k8split

* add info.json file for handwired/myskeeb

* add info.json file for handwired/nicekey

* add info.json file for handwired/onekey

* add info.json file for handwired/postageboard

* add info.json file for handwired/riblee_f401

* add info.json file for handwired/riblee_f411

* add info.json file for handwired/rs60

* add info.json file for handwired/splittest

* add info.json file for handwired/trackpoint

* add info.json file for handwired/traveller

* add info.json file for hhkb_lite_2

* add info.json file for honeycomb

* add info.json file for ivy/rev1

* add info.json file for keebio/viterbi

* add info.json file for laptreus

* add info.json file for latin47ble

* add info.json file for latin64ble

* add info.json file for launchpad/rev1

* add info.json file for lets_split_eh/eh

* add info.json file for mechmini/v1

* add info.json file for meira

* add info.json file for meishi

* add info.json file for merge/iso_macro

* add info.json file for mschwingen/modelm

* add info.json file for pabile/p20

* add info.json files for pimentoso/paddino02

rev1, rev2/left, and rev2/right

* add info.json file for rgbkb/pan

* add info.json files for runner3680

3x6, 3x7, 3x8, 4x6, 4x7, 4x8, 5x6, 5x7, and 5x8

* add info.json file for sck/gtm

* add info.json file for splitish

* add info.json file for standaside

* add info.json file for ungodly/launch_pad

* add info.json file for xelus/trinityxttkl

* Revert "add info.json file for rgbkb/pan"

This reverts commit 280b89bc61.

* correct maintainer for ivy/rev1

Co-authored-by: Alex <alex@turncommerce.com>

This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.

Co-authored-by: Erovia <Erovia@users.noreply.github.com>

* V-USB: Use structs for USB descriptors

* Update usbconfigs

* cformat pass

* V-USB: Use manufacturer and product strings from config.h

* Update board configs

* Remove custom backlight code for PS2AVRGB boards

* Remove custom driver setting

* BACKLIGHT_BREATHING goes in config.h, not here

* Don't need to include backlight.c again here either

* Turn on backlight for Canoe

* Disable console on a few boards due to oversize

* Remove custom matrix from PS2AVRGB boards

* Add custom backlight.c to SRC for bminiex, for now

* Add missing DIODE_DIRECTIONs

* Update atmega32a readme files to match template

* Update atmega32a readme files to match template - fixes

* Apply suggestions from code review

* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now

* Convert remaining PS2AVRGB boards to I2C WS2812 driver

* Add back functions to make the custom matrices happy

* Cleanup rules.mk for 32U4 keyboards, L-M

* Move some stuff to keyboard level

* basic layout v1.0

* changed KC_TRNS to _______

* most symbols are on double tap, except quote, that was cancer

* better formatting and set toggle for game layer

* added colors to layers to make knowing your current layer easy

* have an empty macro working

* enabled unicode

* moved stuff to my folder and removed edits from communal files

* cleanup

* removed the game layer.  Never used it

* made changes requested by drashna and vomindoraan

* got rid of some unnecessary code

* got very basic unicode on mac working

* added ctrl_esc

* more changes as requested by noroadsleft

* more leader additions, removed macros because leader stuff replaces that functionality

* removed an old macro I forgot to remove earlier

* final deletion at noroadsleft request

* changed a line to explicitly specify a purple color.

* Remove/migrate action_get_macro()s from default keymaps

* Leave these breaks alone

* changes to keymaps

* changes to userspace

* changes to userspace

* removed reference to fc660c keymap which no longer exists from userspace readme

* removed preonic keymap

* Cleanup Default Keymaps to conform to QMK Firmware standards

* Minor fixes

* Revert some changes

* fresh commit for a new fork for PR to upstream/master

* gaming mode added, lighting changes for other modes

* rules.mk fixed...

* fixed collision issue with aesthetic and shifty modes

* fixed collision issue with aesthetic and shifty modes

* troubleshooting game mode failing

* moved game tapdance key to default layer, fixed issue

* Remove duplicate 'program' files and refactor to use atmega32a_program.py

* Update readme references from 'program' to 'atmega32a_program.py'

* added mechmini2 keymap

* added preonic keymap

* changed readme

* correction to mechmini 2 readme

* changes to preonic keymap

* Migrate fn_actions for default keymaps

* Rename the Grave/Escape Shift masks

* No need for shift_esc_shift_mask

* Change breaks to return false

* Right align pointers

* Add default case

* Separate cases with empty lines

* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition

* Added my Mechmini2 layout to qmk.

* Added more info to the readme.

* Made changes.

* Update keyboards/mechmini/v2/keymaps/lbibass_625_space/keymap.c

Co-Authored-By: lbibass <ewdries02@gmail.com>

* Update keyboards/mechmini/v2/keymaps/lbibass_split_space/keymap.c

Co-Authored-By: lbibass <ewdries02@gmail.com>

* Added brightness and volume controls to MechMini 625 layout.

* Added my Mechmini2 layout to qmk.

* Added more info to the readme.

* Made changes.

* Update keyboards/mechmini/v2/keymaps/lbibass_625_space/keymap.c

Co-Authored-By: lbibass <ewdries02@gmail.com>

* Update keyboards/mechmini/v2/keymaps/lbibass_split_space/keymap.c

Co-Authored-By: lbibass <ewdries02@gmail.com>

* Adding Split Space support

* Adding my keymap

* update

* Made the requested updates

* Made the requested update

* deleting arkag branch, forcibly moving changes over to master

* fade_color function added, not tested

* added half functions some stuff

* surround_type function implemented and working.

* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes

* added a fade state machine and functionality

* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout

* changes to sleep breath function, changed how I will switch to HALMAK

* support for halmak added

* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid

* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.

* reformatted some if statements in state detection

* changes to force fade to pause on boot, or plug in.

* Attempting to move over to userspace, pushing to repository for help

* userspace stuff....

* userspace stuff....

* layout changes, working userspace,

Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY

* Layout change

Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.

* Removed excessive tabs in files

* Moved mods on homerow around...

* changes recommended by @drashna

* removed homerow mods, more flashy lighting!

* changed delays for lighting.

* velocikey code retro fit into userspace to match typing speed

currently "working" but isn't as reactive as I want.

* Readme and other documentation hidden throughout code

* Added a pretty picture

* pretty picture actually added

* More readme updates

* Velocikey now working inside my userspace!

* Changed repo macro and fixed readme

* Removed media layer, moved media control to LAZY layer

* fixed more merge issues when I had to merge...

* implemented some leader key stuff

* removed merge garbage...

* changes requested by @drashna, leader key switch from macros

* deleting arkag branch, forcibly moving changes over to master

* fade_color function added, not tested

* added half functions some stuff

* surround_type function implemented and working.

* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes

* added a fade state machine and functionality

* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout

* changes to sleep breath function, changed how I will switch to HALMAK

* support for halmak added

* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid

* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.

* reformatted some if statements in state detection

* changes to force fade to pause on boot, or plug in.

* Attempting to move over to userspace, pushing to repository for help

* userspace stuff....

* userspace stuff....

* layout changes, working userspace,

Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY

* Layout change

Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.

* Removed excessive tabs in files

* Moved mods on homerow around...

* changes recommended by @drashna

* removed homerow mods, more flashy lighting!

* changed delays for lighting.

* velocikey code retro fit into userspace to match typing speed

currently "working" but isn't as reactive as I want.

* Readme and other documentation hidden throughout code

* Added a pretty picture

* pretty picture actually added

* More readme updates

* Velocikey now working inside my userspace!

* Changed repo macro and fixed readme

* Removed media layer, moved media control to LAZY layer

* fixed more merge issues when I had to merge...

* deleting arkag branch, forcibly moving changes over to master

* fade_color function added, not tested

* added half functions some stuff

* surround_type function implemented and working.

* added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes

* added a fade state machine and functionality

* build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout

* changes to sleep breath function, changed how I will switch to HALMAK

* support for halmak added

* support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid

* changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler.

* reformatted some if statements in state detection

* changes to force fade to pause on boot, or plug in.

* Attempting to move over to userspace, pushing to repository for help

* userspace stuff....

* userspace stuff....

* layout changes, working userspace,

Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY

* Layout change

Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers.

* Removed excessive tabs in files

* Moved mods on homerow around...

* changes recommended by @drashna

* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.

* Add M6-A keymap

* Update XD60 keymap

* Update XD60 keymap readme

* Update JJ40 and Let's Split keymaps

* Add readme for M6-A

* Fix typo, update JJ40 README

* Update jj40 readme

* Cleanup jj40 keymap

* Revert Let's Split QWERTY layer to default before #2010

* Update numpad layers

* Fix: Let's Split keymap getting stuck mods due to having keycodes assigned on the Raise layer

* Keep ASCII art consistent with keymap

* Staryu: initial port

* Add personal keymap

* Added and updated READMEs

* Fix: default keymap for staryu

* Rudimentary backlight support.

* Enabled mousekeys for default keymap

* use QMK_KEYBOARD_H and LAYOUT

* Update readme.md for NIU mini: flash using avrdude

* Fix missing linebreaks for Staryu README

* Update readme.md

* Update PS2AVRGB boards with new matrix.c

* Update canoe matrix.c; untested

* Fix canoe.c for building (needs matrix_scan_user and matrix_init_user)

* Add personal Iris keymap

* Update keymap

* Update keymap

* Update keymap, disable backlighting and underglow

* Move PrintScreen button

* Add README

* Mechmini 2 updates for QMK Configurator

* Update info.json

A misconfiguration in the ortho layout, K306 key was registered as k305

* Updated ACR60, Mechmini, ALU84 readme information and config.h descripters

Update MECHKEYS keyboards to be uniform in readmes and config.h's PID, MANUFACTORER, and DESCRIPTIONS.   This allows the keyboards to be more uniform amongst the different types.

* Rename keyboards/alu84/keymaps/TurboMech/config.h to keyboards/alu84/keymaps/turbomech

* Rename keyboards/alu84/keymaps/turbomech to keyboards/alu84/keymaps/TurboMech/config.h

* Fixed folder naming for alu84/keymaps/turbomech

* fixed error from compile

removed double `return MACRO_NONE;` and `switch (id) {`

This creates a v1 and v2 subproject.  V1 retains all the same implementations of the bootmapper-ported Mechmnini 1 including #2196.  V2 adds the Mechmini 2.0 kayboard support (I know it took me way to long to get it a pull request in).

All readme's updated to reflect compiling the two seperate keyboards.  Simply either `make mechmini/v1:default` or `make mechmini/v2:defualt`.  Utilizing the rules.mk using `make mechmini:default` will automatically create the Mechmini 2 default keymap as this is the current version and has a much wider user base.