qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Ryan	5af1799735	Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379 )	2 years ago
Ryan	4791cfae1a	Remove width, height and key_count from info.json (#14274 )	2 years ago
James Young	a03aa301de	Remove Full Bootmagic (#13846 ) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta	2 years ago
James Young	1646c0f26c	2021 May 29 Breaking Changes Update (#13034 ) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only	3 years ago
Drashna Jaelre	f0b30e0027	Make Swap Hands use PROGMEM (#12284 ) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource.	3 years ago
Ryan	78149505f9	Fix Uni660 linker errors (#12341 )	3 years ago
James Young	8dfe37a3a3	Sirius UniGo66 touch-up (#12280 ) * un-nest layout macros * use #pragma once include guard in unigo66.h * unify rules.mk to QMK AVR template - remove Bootloader selection comment block - unify Build Option header comment - align Build Option rules and inline comments * remove unused LAYOUT_all macro * update readme.md to match QMK template	3 years ago
Joel Challis	f5a38b95c1	Remove legacy print backward compatiblitly (#11805 ) * Remove legacy print backward compatiblitly * Remove legacy print backward compatiblitly - core * revert comment changes	3 years ago
Ryan	5ea92a9c1c	Serial refactor (#11521 )	3 years ago
James Young	7e77c2361f	Move Backslash/ISO Hash key to home row for Uni660 rev2 ISO (#11657 ) * Move Backslash/ISO Hash key to home row for Uni660 rev2 ISO * update readme formatting	3 years ago
Ryan	e0ed2c950d	Remove `DESCRIPTION`, R-V (#11632 )	3 years ago
Ryan	72ca319bee	Uni660 refactor (#11526 )	3 years ago
Zach White	c0dcee96a8	Initial list of keyboards to exclude from CI (#11213 )	3 years ago
Ryan	5f06fce2c5	Fix info.json for Uni660 (#9489 )	3 years ago
Daniel Klein	d0d105b083	split config.h	4 years ago
Daniel Klein	c0a57c2a50	split rev2.h for ansi and iso	4 years ago
Daniel Klein	d06340f665	uni660rev2 added	4 years ago
Daniel H Klein	d3286af398	Add Uni660 Keyboard (#8018 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * default keymap cleanup * bug fixes * add uni660 keyboard * remove zip * remove redundant rules.mk * remove redundant via keymap * Update keyboards/sirius/uni660/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/sirius/uni660/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * remove unnecessary functions * fix if * add back via keymap, remove old eeprom code * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * changes requested for qmk * Update keyboards/sirius/uni660/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * debouncing and other minor changes * Update keyboards/sirius/uni660/uni660.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/sirius/uni660/uni660.h Co-Authored-By: fauxpark <fauxpark@gmail.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: fauxpark <fauxpark@gmail.com>	4 years ago
ridingqwerty	d2e1cc4d48	Trim firmware sizes from default rules.mk, part 3 (#8045 )	4 years ago
fauxpark	ef8a4e5aaf	Remove all references to "CUSTOM_MATRIX" as a diode direction (#7937 )	4 years ago
fauxpark	d3bd1d893b	Ensure `PROGMEM` is present on default keymaps (#7836 )	4 years ago
fauxpark	6d7c6d4fd6	Cleanup rules.mk for 32U4 keyboards, R-S (#7182 )	4 years ago
linyaofred	fc87d9b0d5	fix wrong key order in qmk configurator. (#5342 )	5 years ago
zvecr	fc06986989	Remove CUSTOM_MATRIX option from diode direction (#5090 ) * Remove CUSTOM_MATRIX refs from DIODE_DIRECTION * Remove '#define DIODE_DIRECTION CUSTOM_MATRIX' * Remove CUSTOM_MATRIX refs from DIODE_DIRECTION documentation	5 years ago
Daniel H Klein	2ba54690e6	Fix height in info.json for Unigo66 (#5137 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * default keymap cleanup * bug fixes * fixed height in info.json	5 years ago
Daniel H Klein	8cd6cfcb77	[Keyboard] Unigo66 beta pcb added, bug fixes for flashing (#5108 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * default keymap cleanup * bug fixes * beta user pcb added, flashing fixed * syntax fix * updated info.json * fix spelling * fix readme	5 years ago
Daniel H Klein	76da6ec061	[Keyboard] Unigo66 fixes and improvements (#5060 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * updates and fixes	5 years ago
Fredric Silberberg	87cbb1c552	Generalized nyquist layout for 5x12 boards. Removed duplicate readme.md that was cased the same and caused issues.	5 years ago
Daniel H Klein	f0e0a67ea5	[Keyboard] Bug Fix To Unigo66 (#4995 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * default keymap cleanup * bug fixes	5 years ago
Daniel H Klein	9ae800fab3	[Keyboard] UniGo66 keyboard added (#4913 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <danielklein@utexas.edu> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * default keymap cleanup	5 years ago

29 Commits (9a0addc77e3e48b908b846fc78326d4a20c30bc9)