* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta

Co-authored-by: filterpaper <filterpaper@localhost>

* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only

Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>

* Issue 9942: Add Quantum defines

Add codes to quantum_keycodes for LSA, RSA, RCS, and their corresponding _T macros

* 9942: Add documentation for new defines

Add documentation for new defines in feature request 9942. Also define SAGR and SAGR_T as aliases for RSA and RSA_T.

* Update quantum/quantum_keycodes.h

* Update docs/keycodes.md

* Update docs/keycodes.md

* Update docs/keycodes.md

* Update docs/keycodes.md

This commits add the SH_OS keycode, which works similarly to one shot
layers:
* while pressed, the keyboard is swapped
* if no keys were pressed while it was pressed, the next key press is
swapped

SH_OS also supports chaining with one shot layers:
OSL(x) + SH_OS + key interprets the key press on the oneshot layer.

The ONESHOT_TIMEOUT setting used by one shot keys and layers is also
used by oneshot swap hands. In the above chaining scenario the timeout
of the oneshot layer is reset when swap hands is activated.

Resolves #2682

* Rename UC_OSX (and related constants) to UC_MAC

* Update UNICODE_SONG_OSX references to UNICODE_SONG_MAC

* Update UC_M_OS references to UC_M_MA

* Add UC_OSX alias for backwards compatibility

* Add deprecation warning for UC_OSX to Unicode docs

* Add UC_M_OS alias for backwards compatibility

* Update newly found UC_M_OS and UNICODE_SONG_OSX references

* Add legacy UNICODE_MODE_OSX alias, revert changes to user keymaps

* Add legacy UNICODE_SONG_OSX alias, revert changes to user keymaps

* Replace removed sounds in Unicode song doc examples

* [Docs] Update layer documentation

* Add layer_state_cmp functions

* Fix cut/copy/paste issue

* Add id tags

* Apply noroads corrections

* Move Layers section to separate document

* Fix ID tag for layers

* Use better name for summary/side bar

* Fix feature page linkage

As well as a small spell error close by

* Remove paper analogy for now

It prevents the Table of Contents from parsing that heading.

Also clean up some trailing whitespace.

* Add short alias for `MAGIC_TOGGLE_NKRO`

* Add aliases for the other Bootmagic keycodes

* Replace long form in default keymaps

* Add shift-to-invert to remaining directional RGB_* keycode pairs

RGB_MODE_FORWARD / RGB_MODE_REVERSE invert their functions when shift is held.
This change adds the same capabilities to the remaining directional RGB_*
keycode pairs.  This improves consistency and provides full RGB control in a
keymap containing only one keycode from each pair.

* remove redundant variable

* fix typo

* Fix more typos

Flyspell is on now I swear!

* Convert Dynamic Macro to a Core Feature

This imports the code from Dynamic Macro into the core code, and handles it, as such.

This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched.

Additionally, this reorganizes the documentation to better reflect the changes.

Also, it adds user hooks to the feature so users can customize the existing functionality.

Based heavily on and closes #2976

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Cleanup based on feedback

* Add short-form keycodes and document them

- add short-form keycodes to quantum/quantum_keycodes.h
- document the new aliases in docs/feature_dynamic_macros.md

* Add Dynamic Macros section and keycodes to docs/keycodes.md

* Make anti-nesting optional

* Add documentation for DYNAMIC_MACRO_NO_NESTING option

* Fix Merge artifacts

* Fix formatting typo in docs

Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>

* Remove DYNAMIC_MACRO_RANGE as it's not needed

* Fix includes and layer var type

* Remove obsolete note about media keys in MacOS

KC_MNXT and KC_MPRV work fine on MacOS, so this note is obsolete.

* Document behaviour of MEDIA_FAST_FORWARD/MEDIA_REWIND codes on MacOS

* Small typo fix, and make OS-dependent keycode claim less absolute

* Update docs/keycodes_basic.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Add docs on bootmagic/magic keycodes for setting handedness

* Clang format fixes

* Maintain backwards compatibility

* Maintain backwards compatibility

* Add MAGIC_SWAP_CONTROL_LGUI and MAGIC_UNSWAP_CONTROL_LGUI keycodes

Key codes to swap and unswap the control and windows/cmd keys

* Fix issues with pull request #6110

Renamed swap/unswap lctl and lgui key codes, added key codes to swap/unswap rctl and rgui, and moved new bool inside keycode_config.h struct to the end

* Move new keycodes to the end of the enum (#6110)

* add cases for swapped control and OS keys to mod_config (#6110)

* Add new keycodes to feature_bootmagic.md (#6110)

* Add R+L swap codes to keep in parity with AG_* codes

* Extend Magic range check to include new magic codes

* Update audio docs

* Combine 2 byte ranges into 1 word for EECONFG

Fix names for Keymap config EEPROM

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_bootmagic.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Reword confusing description of `TO(layer)`

* Update docs/keycodes.md

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Added check for pressed to clear space cadet

* Found some docs to update

* Update docs/quantum_keycodes.md

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Changes from PR

* Expose unicode_saved_mods

* Add UNICODEMAP shift pair functionality and XS keycode

* Add XS to keycode reference documentation

* Pick pair index based on both Shift and Caps Lock state

* Add XS to Unicode feature docs

* Clean up process_unicode* headers

* Extract unicode_map index calculation into function

* Pick pair index as XOR rather than OR of Shift and Caps states

* unicode_input_start() has to be called before the unicode_map index is calculated

* Replace unicodemap_input_error() with more generic unicode_input_cancel()

* Replace register+tap+unregister with tap_code16(LCTL(LSFT(KC_U)))

* UNICODE_OSX_KEY → UNICODE_KEY_OSX, UNICODE_WINC_KEY → UNICODE_KEY_WINC

* Make keycode range checks more robust

* Fix keycode range checks for different input modes

* Add UNICODE_KEY_LNX, update docs

* QK_UNICODEMAP_SHIFT → QK_UNICODEMAP_PAIR

* XS → XP, update docs

* Tweak Unicode docs

* Use recently added MOD_MASK_SHIFT and IS_HOST_LED_ON helpers

* Update Unicode table in docs/keycodes.md

* Update Unicode docs per review comments

* Replace references to Mac OS X with macOS in Unicode docs

* As of v0.9.0, WinCompose supports all possible code points

* Expand descriptions in XP docs

* Update keycode table and cycling docs

* Further expand cycling docs

* Adding documentation for the LM layer modifier.

This will hopefully clear up some of the confusion around adding this layer modifier.  I struggled with this a bit as well at first.

* Removing duplicate table.

* Changed section title to `Changing Layers`

* Retain name

* Added aliases for OSX brightness

* Updated docs for alises

* Moved aliases, added docs to Brightness section

* Update docs/keycodes.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update docs/keycodes.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keycode.h

* Update keycode.h

* Update keycodes.md

* Update docs/keycodes.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Remove unused UNICODE(n) macro, update docs

* Add note about max length of unicode_map to docs

* QK_UNICODE_MAP → QK_UNICODEMAP

* Refactor process_unicode_map

* process_unicode_map → process_unicodemap

This is done for consistency: UNICODEMAP is the method (hence UNICODEMAP_ENABLE, process_unicodemap), whereas unicode_map is the mapping table itself.

* Update references and ordering in docs/understanding_qmk

* Add additional note to docs/understanding_qmk

* &unicode_map[index] → unicode_map + index

This avoids the issue of the compiler sometimes complaining about the array index being out of range

* Update docs/getting_started_make_guide

* Update method sections in docs/feature_unicode

* Clarify audio keycodes

* Spelling errors

Co-Authored-By: drashna <drashna@live.com>

* Spacing in md

Co-Authored-By: drashna <drashna@live.com>

* Fix midi link too

* Wordsmithing

* Docs: Remove duplicate layer block in keycodes.md

Reorder and add OSL

* remove glitch

Co-Authored-By: drashna <drashna@live.com>

* Add standard ALGR defition, remove (re)definitions from language files

* Use ALGR(kc) consistently in ALTGR(kc) aliases

* Non-Nordic keymaps should not use NO_ALGR

* Add standard KC_ALGR definition

* Update docs with ALGR and KC_ALGR

* Update SS_ALGR and ALGR_T aliases

Previously, Unicode Support heading appeared as the last row in the Swap Hands table.

* Remove ALTG(kc) as it's misleading and is not actually AltGr

* Add temporary alias for ALGR in keyboards/planck/keymaps/pevecyan/keymap.c

* Reorder keycode list docs according to HID usage

* Add missing keycodes/descriptions/aliases

* Adds Audio Keycodes to both the feature page and master list
* Re-orders the keycode list, so it's alphabetical (mostly)
* Add additional (missing) sections to the keycode list
* Add and update links in the keycode page
* Add and reorder links in sidebar's keycode section