* Clean up `DEBOUNCE` in config.h, 0-9
* Clean up `DEBOUNCE` in config.h, A
* Clean up `DEBOUNCE` in config.h, B
* Clean up `DEBOUNCE` in config.h, C
* Clean up `DEBOUNCE` in config.h, D
* Clean up `DEBOUNCE` in config.h, E
* Clean up `DEBOUNCE` in config.h, F
* Clean up `DEBOUNCE` in config.h, G
* Clean up `DEBOUNCE` in config.h, H
* Clean up `DEBOUNCE` in config.h, handwired
* Clean up `DEBOUNCE` in config.h, I
* Clean up `DEBOUNCE` in config.h, J
* Clean up `DEBOUNCE` in config.h, K
* Clean up `DEBOUNCE` in config.h, L
* Clean up `DEBOUNCE` in config.h, M
* Clean up `DEBOUNCE` in config.h, N
* Clean up `DEBOUNCE` in config.h, O
* Clean up `DEBOUNCE` in config.h, P
* Clean up `DEBOUNCE` in config.h, Q
* Clean up `DEBOUNCE` in config.h, R
* Clean up `DEBOUNCE` in config.h, S
* Clean up `DEBOUNCE` in config.h, T
* Clean up `DEBOUNCE` in config.h, U
* Clean up `DEBOUNCE` in config.h, V
* Clean up `DEBOUNCE` in config.h, W
* Clean up `DEBOUNCE` in config.h, X
* Clean up `DEBOUNCE` in config.h, Y
* Clean up `DEBOUNCE` in config.h, Z
* Remove default debounce from info.json
* Migrate non-default debounce to info.json
* Replace Tapping Force Hold feature with Quick Tap Term
* Replace keyboard level TAPPING_FORCE_HOLD with QUICK_TAP_TERM 0
* Deprecate force hold in info_config.json
* Before and after quick tap term unit tests
* Quick tap unit tests iteration
* Keymap config.h correction
* Remove TAPPING_FORCE_HOLD_PER_KEY macros that were missed
* Add two more test cases for quick tap
* Replace TAPPING_FORCE_HOLD with QUICK_TAP_TERM in configs #2
* Replace TAPPING_FORCE_HOLD_PER_KEY with QUICK_TAP_TERM_PER_KEY in configs #2
* Add function declaration for get_quick_tap_term
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
Add rgb-light and encoder for lily58 mod
* add support for lily58 encoders (one per size) and rgb-light.
The pcb and details here https://github.com/orvisevans/Lily58-Glow-Enc
* add support for lily58 encoders (one per size) and rgb-light.
The pcb and details here https://github.com/orvisevans/Lily58-Glow-Enc
* Update keyboards/lily58/glowEnc/config.h
* add GPL License to growEnc.h
* rename folder according to requirement to lower case
* Add script to build all bcat keymaps at once
* Move userspace RGB to separate source file
* Move layer handling logic into userspace
* Move keycap aliases into userspace
* Add OLED userspace library and Lily58 OLED setup
* Add Luna keyboard pet, generic OLED pet framework
Luna artwork and original implementation by HellSingCoder, licensed
under GPL v2.0.
See also: 6dfe915e26/keyboards/sofle/keymaps/helltm/keymap.c
* Use OLED on bcat's Crkbd
I had to turn off a few unused features to address firmware size limits.
* Remove vestigial NK_TOGG keybindings
* Add post-render hook to OLED pet API
This enables OLED pets to draw custom widgets (e.g., LED indicator
status) on top of their animation frames.
* Add Isda keyboard pet
For future use on my Unicorne keyboard. Unicorn artwork by sparrow666,
licensed under GPL v2.0.
See also: https://opengameart.org/content/unicorn-2
* Replace OLED timeout implementation with custom
The default implementation never lets the OLED turn off if a continuous
animation is in progress. The custom one does.
* Move keyboard state for OLED functions into struct
No change in firmware size, but makes keymaps read a little nicer and
enables more functionality in OLED pets.
* Enable continuously running OLED pet (for Luna)
* Sync OLED state; enable Bootmagic only when needed
The new extensible split transport for Split Common finally allows OLED
on/off status to be synced between halves of the keyboard. :)
Unfortunately, this required disabling Bootmagic Lite to keep my Crkbd
under the firmware size limit. (I now after 28 bytes free on avr-gcc
version 8.5.0.) So now I'll enable Bootmagic only on keyboards that
actually require it, i.e., ones lacking an accessible reset button.
* Update 9-Key macropad keymap for working from home
* Remove includes redundant with quantum.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Simplify BCAT_OLED_PET makefile logic
* Swap some keys on my 9-Key macropad around
* Inline spurious variable in OLED code
* Remove max brightness that's now set by default
The default max brightness is only 120 rather than 150, but that might
actually fix some weirdness I've seen with bright white LED settings.
* Enable specific RGBLIGHT modes instead of default
The general trend these days seems to be enabling only the modes you
want, so I'm manually expanding the ones currently enabled by
RGBLIGHT_ANIMATIONS.
I'd like to try out the TWINKLE mode too, but it seems not to work at
all on ARM right now, and all my usable RGBLIGHT keebs are ARM boards.
* Reenable RGB_MATRIX animations after #15018
My Crkbd still has a reasonable amount of free space with these:
27974/28672 (97%, 698 bytes free). The RGB_MATRIX_KEYPRESSES effects
would put it over the firmware size limit, but I really don't ever use
those anyway.
* Use new get_u8_str function for WPM display
Co-authored-by: Drashna Jaelre <drashna@live.com>
This commit makes the mode keys transparent in the LOWER layer instead
of disabled.
Before this commit, the following sequence of key presses `LGUI+LOWER+l`
would translate into `Cmd+right` in macOS and, therefore, move the
cursor to the end of line.
But, pressing `LOWER+LGUI+l` would completely ignore the `LGUI` and,
therefore, move the cursor one letter to the right.
With this change, pressing `LOWER+LGUI+l` produces the same result as
`LGUI+LOWER+l`.
This is also true for multiple other combinations, like
`RALT+SHIFT+LOWER+l`, `LOWER+RALT+SHIFT+l`, `SHIFT+LOWER+RALT+l`, etc.
Co-authored-by: Gaston Jorquera <gjorquera@gmail.com>
Ryan
Nick Brassel
precondition
Albert Y
gshmu
Joel Challis
Drashna Jaelre
Dasky
Stephen J Bush
Manna Harbour
Allen Choi
N L
Liashenko Volodymyr
druotoni
Gianluca D'Abrosca
Jonathan Rascher
Gastón Jorquera
pttbx