qmk_firmware

Commit Graph

Author	SHA1	Message	Date
Joel Challis	374525c995	Allow some usbconfig.h overrides at the keyboard level (#8647 )	4 years ago
Ryan	99f7fe6bd4	Clean up ATSAM ifdefs (#8808 )	4 years ago
Chris Ko	9b70e53508	[Docs] Fixed minor typos (#8860 )	4 years ago
Ryan	bc13dcd349	Remove Atmel FLIP from install scripts and documentation (#8822 )	4 years ago
Nick Brassel	46e4493761	Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. (#8775 )	4 years ago
Nick Brassel	05e9ff6554	Add support for hardware and board initialisation overrides. (#8330 ) * Add support for hardware and board initialisation overrides. * qmk cformat. * Add some documentation. * Docs clarity. * Make early_hardware_init_pre a no-op for now, until migrations occur. * Doco update * Make distinction between keyboard and ChibiOS board in docs * Doc anchors. * Update tmk_core/protocol/chibios/main.c Co-Authored-By: Joel Challis <git@zvecr.com> * Rework bootloader entry to be off by default, allow opting-in. Co-authored-by: Joel Challis <git@zvecr.com>	4 years ago
Konstantin Đorđević	370577e4ed	Add OPT aliases for ALT keycodes and macros (#8714 )	4 years ago
Drashna Jaelre	23124b9fd1	Fix bug with layer caching in get_event_keycode (#8693 ) * Fix bug with layer caching in get_event_keycode * Improve naming	4 years ago
QMK Bot	cc38627816	format code according to conventions [skip ci]	4 years ago
Purdea Andrei	6c2c3c13e9	Various fixes to how timer differences are calculated (#8585 ) * tmk_core/common: Fixing TIMER_DIFF macro to calculate difference correctly after the timer wraps. Let's go through an example, using the following macro: If the first timer read is 0xe4 and the second one is 0x32, the timer wrapped. If the timer would have had more bits, it's new value would have been 0x132, and the correct difference in time is 0x132 - 0xe4 = 0x4e old code TIMER_DIFF_8(0x32, 0xe4) = 0xff - 0xe4 + 0x32 = 0x4d, which is wrong. new code TIMER_DIFF_8(0x32, 0xe4) = 0xff + 1 - 0xe4 + 0x32 = 0x4e, which is correct. This also gives a chance for a smart compiler to optimize the code using normal integer overflow. For example on AVR, the following C code: uint8_t __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } With the original code, it gets translated to the following list of instructions: 00004c6e <test>: 4c6e: 98 2f mov r25, r24 4c70: 86 1b sub r24, r22 4c72: 96 17 cp r25, r22 4c74: 08 f4 brcc .+2 ; 0x4c78 <test+0xa> 4c76: 81 50 subi r24, 0x01 ; 1 4c78: 08 95 ret But with this commit, it gets translated to a single instruction: 00004c40 <test>: 4c40: 86 1b sub r24, r22 4c42: 08 95 ret This unfortunately doesn't always work so nicely, for example the following C code: int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } (Note: return type changed to int) With the original code it gets translated to: 00004c6e <test>: 4c6e: 28 2f mov r18, r24 4c70: 30 e0 ldi r19, 0x00 ; 0 4c72: 46 2f mov r20, r22 4c74: 50 e0 ldi r21, 0x00 ; 0 4c76: 86 17 cp r24, r22 4c78: 20 f0 brcs .+8 ; 0x4c82 <test+0x14> 4c7a: c9 01 movw r24, r18 4c7c: 84 1b sub r24, r20 4c7e: 95 0b sbc r25, r21 4c80: 08 95 ret 4c82: c9 01 movw r24, r18 4c84: 84 1b sub r24, r20 4c86: 95 0b sbc r25, r21 4c88: 81 50 subi r24, 0x01 ; 1 4c8a: 9f 4f sbci r25, 0xFF ; 255 4c8c: 08 95 ret Wth this commit it gets translated to: 00004c40 <test>: 4c40: 28 2f mov r18, r24 4c42: 30 e0 ldi r19, 0x00 ; 0 4c44: 46 2f mov r20, r22 4c46: 50 e0 ldi r21, 0x00 ; 0 4c48: 86 17 cp r24, r22 4c4a: 20 f0 brcs .+8 ; 0x4c54 <test+0x14> 4c4c: c9 01 movw r24, r18 4c4e: 84 1b sub r24, r20 4c50: 95 0b sbc r25, r21 4c52: 08 95 ret 4c54: c9 01 movw r24, r18 4c56: 84 1b sub r24, r20 4c58: 95 0b sbc r25, r21 4c5a: 93 95 inc r25 4c5c: 08 95 ret There is not much performance improvement in this case, however at least with this commit it functions correctly. Note: The following commit will improve compiler output for the latter example. * tmk_core/common: Improve code generation for TIMER_DIFF* macros Because of integer promotion the compiler is having a hard time generating efficient code to calculate TIMER_DIFF* macros in some situations. In the below example, the return value is "int", and this is causing the trouble. Example C code: int __attribute__ ((noinline)) test(uint8_t current_timer, uint8_t start_timer) { return TIMER_DIFF_8(current_timer, start_timer); } BEFORE: (with -Os) 00004c40 <test>: 4c40: 28 2f mov r18, r24 4c42: 30 e0 ldi r19, 0x00 ; 0 4c44: 46 2f mov r20, r22 4c46: 50 e0 ldi r21, 0x00 ; 0 4c48: 86 17 cp r24, r22 4c4a: 20 f0 brcs .+8 ; 0x4c54 <test+0x14> 4c4c: c9 01 movw r24, r18 4c4e: 84 1b sub r24, r20 4c50: 95 0b sbc r25, r21 4c52: 08 95 ret 4c54: c9 01 movw r24, r18 4c56: 84 1b sub r24, r20 4c58: 95 0b sbc r25, r21 4c5a: 93 95 inc r25 4c5c: 08 95 ret AFTER: (with -Os) 00004c40 <test>: 4c40: 86 1b sub r24, r22 4c42: 90 e0 ldi r25, 0x00 ; 0 4c44: 08 95 ret Note: the example is showing -Os but improvements can be seen at all optimization levels, including -O0. We never use -O0, but I tested it to make sure that no extra code is generated in that case.OA * quantum/debounce: Fix custom wrapping timers in eager_pr and eager_pk debounce algorithms Please see the below simulated sequence of events: Column A is the 16-bit value returned by read_timer(); Column B is the value returned by custom_wrap_timer_read(); Column C is the original code: (timer_read() % MAX_DEBOUNCE) A, B, C 65530, 19, 30 65531, 20, 31 65532, 21, 32 65533, 22, 33 65534, 23, 34 65535, 24, 35 0 25, 0 1, 26, 1 2, 27, 2 3, 28, 3 4, 29, 4 5, 30, 5 read_timer() wraps about every 1.09 seconds, and so debouncing might fail at these times without this commit. * quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. * quantum/debounce/eager_pr and eager_pk: modifications for code readability according to code review. (2)	4 years ago
Manna Harbour	07c75feba3	Add PS2_MOUSE_ROTATE to compensate for device orientation (#8650 ) * Add PS2_MOUSE_ROTATE to compensate for device orientation * fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation * Reformat with IndentPPDirectives: AfterHash as per #6316	4 years ago
Konstantin Đorđević	be2f5816b6	Fix compile issues related to NO_ACTION_MACRO/FUNCTION and LTO_ENABLE (#8663 ) * Define NO_ACTION_MACRO/FUNCTION in header instead of makefile when LTO is enabled Currently, boards and keymaps that define NO_ACTION_MACRO/FUNCTION unconditionally will not compile with LTO_ENABLE (#8604). This fixes the issue by moving the definitions from common.mk to action.h, which enables us to check for previous definitions of those macros (this cannot be done in a makefile). * Remove LTO checks in templates Since now NO_ACTION_MACRO/FUNCTION are defined as needed in action.h (which is included by quantum.h), checking for LTO in keyboard and user code is no longer required. * Update LTO_ENABLE docs	4 years ago
Ryan	400ca2d035	spi_master for AVR (#8299 ) * Change _delay_ms/us() to wait_ms/us() * Switch to platform-agnostic GPIO macros * Add AVR spi_master and migrate Adafruit BLE code * Set verbose back to false * Add clock divisor, bit order and SPI mode configuration for init * Add start and stop functions * Move configuration of mode, endianness and speed to `spi_start()` * Some breaks here would be good * Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4) * Remove mode and divisor enums * Add some docs * No hr at EOF * Add links in sidebar	4 years ago
QMK Bot	7642075fc3	format code according to conventions [skip ci]	4 years ago
Ryan	ca91dc594b	V-USB: Remove some stuff from usbconfig.h that should not be configurable (#8656 ) * V-USB: Remove some stuff from usbconfig.h that should not be configurable * Clean up some ifdefs * And some more * Even more	4 years ago
Drashna Jaelre	845953cc67	V-USB remote wakeup (#7627 ) * V-USB remote wakeup Backport from tmk/tmk_keyboard@391c979be751eaf113c8f53c36644a6bb6ff12f6 * Change vusb.c remote wake config as per fauxpark's suggestion	4 years ago
QMK Bot	59188bf29d	format code according to conventions [skip ci]	4 years ago
Joel Challis	9c4bf0ac4a	Initial support for ATtiny85 (#8632 ) * Initial support for ATtiny85 * Update mcu selection	4 years ago
Ryan	2b427f774a	Fix `pgm_read_ptr()` define for ARM (#8658 )	4 years ago
Joel Challis	58a9c84d6b	Strip out features to allow minimum firmware sizes (#8645 )	4 years ago
yiancar	c217186bea	Updated V-USB template to allow usbFunctionWriteOut (#8634 )	4 years ago
Ryan	95c5c11d0b	Miscellaneous cleanups (#8639 ) * Miscellaneous cleanups * Cast NO_PIN	4 years ago
Joel Challis	b6a09502c6	Migrate :program logic to :flash (#8631 )	4 years ago
Ryan	51a81813b0	V-USB: Consolidate usbconfig.h's into a single file (#8584 )	4 years ago
Takuya Urakawa	89a675d57c	add hid_raw feature to VUSB (#8380 ) * rewrite usbhid feature on vusb * Apply suggestions from code review Co-Authored-By: Ryan <fauxpark@gmail.com> * fix typo * fix typo again * Update tmk_core/protocol/vusb/vusb.c Co-Authored-By: Ryan <fauxpark@gmail.com> * clean up defines Co-authored-by: Ryan <fauxpark@gmail.com>	4 years ago
Casper Weiss Bang	13fff52f6b	fixed problem with implicit declaration in quantum/rgblight.c (#8406 ) * Update tmk_core/common/progmem.h Co-Authored-By: Ryan <fauxpark@gmail.com> * Update quantum/rgblight.c Co-Authored-By: Ryan <fauxpark@gmail.com> * fixed problem with implicit declaration in quantum/rgblight.c (#8381) Co-authored-by: Ryan <fauxpark@gmail.com>	4 years ago
Ryan	14079ce698	V-USB: Use structs for USB descriptors (#8572 ) * V-USB: Use structs for USB descriptors * Update usbconfigs * cformat pass	4 years ago
Joel Challis	23e942ae4e	Enable SLEEP_LED on ATmega32A (#8531 ) * Port over some AVR backlight logic to SLEEP_LED * Port over some AVR backlight logic to SLEEP_LED - add timer 3 * Port over some AVR backlight logic to SLEEP_LED - clang format * Enable SLEEP_LED within vusb protocol	4 years ago
Ryan	4d76d85d7b	V-USB: Use manufacturer and product strings from config.h (#7797 ) * V-USB: Use manufacturer and product strings from config.h * Update board configs	4 years ago
QMK Bot	9fbf17b90e	format code according to conventions [skip ci]	4 years ago
foxx1337	96bfce7000	Add RawHID support to ATSAM (Massdrop boards) (#8530 ) * Add support for RAW endpoint for arm_atsam This the excellent work from helluvamatt/qmk_firmware in bb6eeb93b. * Reformat arm_atsam RAW endpoint code Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>	4 years ago
Joel Challis	6ceaae30f5	Run clang-format manually to fix recently changed files (#8552 )	4 years ago
Drashna Jaelre	5117dff6a2	Add Post Processing to process_record (#4892 ) * Improve process_record system Code based on @colinta's * Rename and better handle functions * Fix incorrect function call to process_record_user * Add documentation for post_process_record * Add both get_event_keycode and get_record_keycode functions And add some comments about these functions * Update code format * Cleanup merge artifacts	4 years ago
Joel Challis	d8f3c28a37	Align some ChibiOS build logic (#8461 ) * Align some ChibiOS build logic * infer more makefile logic * Move bootloader logic to chibios file	4 years ago
QMK Bot	d511e52c1f	format code according to conventions [skip ci]	4 years ago
Joel Challis	789e199450	Add support for Bootmagic lite when using SPLIT_HAND_PIN (#8347 ) * Add support for Bootmagic lite when using SPLIT_HAND_PIN * Deduplicate bootmagic_lite logic from within via * Revert location of defaults so that user overrides still work for now * Tidy up code slightly	4 years ago
Ryan	f4799481cd	Fix formatting for report.h (#8512 )	4 years ago
QMK Bot	f9c53ca71a	format code according to conventions [skip ci]	4 years ago
Joel Challis	d96380e654	Initial arm->chibios pass - simplify some platform logic (#8450 )	4 years ago
Ryan	7e80686f1e	Tidy up report.h (#8486 ) * Tidy up report.h * Add link to Review Request 41 for brightness controls	4 years ago
Ryan	e967471c4f	Remove ACT_COMMAND (#8487 ) * Remove ACT_COMMAND * And from action_t as well	4 years ago
Joel Challis	e34764502f	Remove qmk archive generation (#8462 )	4 years ago
QMK Bot	c89012566c	format code according to conventions [skip ci]	4 years ago
Takeshi ISHII	9dfebb9d67	Remove unnecessary import of rgblight.h in tmk_core/protocol//.c (#8432 ) * Remove unnecessary import of rgblight.h in tmk_core/protocol//.c * tmk_core/protocol/chibios/main.c * tmk_core/protocol/lufa/lufa.c see #8380 for tmk_core/protocol/vusb/main.c. * Remove '#include "rgblight.h"' from tmk_core/protocol/vusb/main.c.	4 years ago
QMK Bot	5e98eaaaff	format code according to conventions [skip ci]	4 years ago
fredizzimo	9e8767917d	Fix pressing two keys with the same keycode but different modifiers (#2710 ) * Fix extra keyboard report during test_fixture teardown * Add tests for pressing two keys with only different modifers * Fix #1708 When two keys that use the same keycode, but different modifiers were pressed at the same time, the second keypress wasn't registered. This is fixed by forcing a key release when we detect a new press for the same keycode. * Fix the NKRO version of is_key_pressed * Fix uninitalized loop variable Co-authored-by: Jack Humbert <jack.humb@gmail.com>	4 years ago
QMK Bot	f89439ae09	format code according to conventions [skip ci]	4 years ago
francislan	3cd2a27ac0	Decouple mouse cursor and mouse wheel in accelerated mode (#6685 ) * Decouples mouse cursor and mouse wheel movements in accelerated mode. * Fixed comment indentation. * Updated docs Co-authored-by: Francis LAN <francislan@google.com>	4 years ago
Drashna Jaelre	668121bbf8	Fix layer debug calls (#8370 )	4 years ago
Takeshi ISHII	dbbab40981	Refactor rgblight_reconfig.h (#7773 ) * Moved contents of rgblight_reconfig.h to rgblight_post_config.h. In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h. This commit does not change the build result. Testing script ```shell # build on master git checkout master echo master > /tmp/master_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt # build on refactor_rgblight_reconfig.h git checkout refactor_rgblight_reconfig.h echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt # RGBLIGHT_ENABLE = no make HELIX=verbose helix/rev2:default:clean make HELIX=verbose helix/rev2:default md5 helix_rev2_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, with animations make HELIX=verbose helix/rev2/back:default:clean make HELIX=verbose helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt # RGBLIGHT_ENABLE = yes, without animations make HELIX=verbose,no_ani helix/rev2/back:default:clean make HELIX=verbose,no_ani helix/rev2/back:default md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt diff -u /tmp/master_md5.txt /tmp/branch_md5.txt ``` Test result: ``` --- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900 +++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900 @@ -1,4 +1,4 @@ -master +refactor_rgblight_reconfig.h MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3 ``` * Expressions that are too long are difficult to read, so wrap them. * Edit the expression again * remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common//suspend.c`, `tmk_core/protocol//main.c` move contents of rgblight_reconfig.h to rgblight.h. The following changes were made to rgblight.h. ```diff +#ifdef RGBLIGHT_USE_TIMER void rgblight_task(void); void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); void rgblight_timer_toggle(void); +#else +#define rgblight_task() +#define rgblight_timer_init() +#define rgblight_timer_enable() +#define rgblight_timer_disable() +#define rgblight_timer_toggle() +#endif ``` The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c. ```diff -# ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); -# endif ``` ```diff -#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE) +#if defined(RGBLIGHT_ENABLE) rgblight_task(); #endif ``` * remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c Co-authored-by: Joel Challis <git@zvecr.com>	4 years ago

... 3 4 5 6 7 ...

756 Commits (fced377ac007d27f2650ccffbe0b18abcdcfe23d)