// Copyright 2021 Nick Brassel (@tzarc) // SPDX-License-Identifier: GPL-2.0-or-later #include "qp_internal.h" #include "qp_comms.h" #include "qp_ili9341.h" #include "qp_ili9xxx_opcodes.h" #include "qp_tft_panel.h" #ifdef QUANTUM_PAINTER_ILI9341_SPI_ENABLE # include #endif // QUANTUM_PAINTER_ILI9341_SPI_ENABLE //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Common // Driver storage tft_panel_dc_reset_painter_device_t ili9341_drivers[ILI9341_NUM_DEVICES] = {0}; //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Initialization bool qp_ili9341_init(painter_device_t device, painter_rotation_t rotation) { // clang-format off const uint8_t ili9341_init_sequence[] = { // Command, Delay, N, Data[N] ILI9XXX_CMD_RESET, 120, 0, ILI9XXX_CMD_SLEEP_OFF, 5, 0, ILI9XXX_POWER_CTL_A, 0, 5, 0x39, 0x2C, 0x00, 0x34, 0x02, ILI9XXX_POWER_CTL_B, 0, 3, 0x00, 0xD9, 0x30, ILI9XXX_POWER_ON_SEQ_CTL, 0, 4, 0x64, 0x03, 0x12, 0x81, ILI9XXX_SET_PUMP_RATIO_CTL, 0, 1, 0x20, ILI9XXX_SET_POWER_CTL_1, 0, 1, 0x26, ILI9XXX_SET_POWER_CTL_2, 0, 1, 0x11, ILI9XXX_SET_VCOM_CTL_1, 0, 2, 0x35, 0x3E, ILI9XXX_SET_VCOM_CTL_2, 0, 1, 0xBE, ILI9XXX_DRV_TIMING_CTL_A, 0, 3, 0x85, 0x10, 0x7A, ILI9XXX_DRV_TIMING_CTL_B, 0, 2, 0x00, 0x00, ILI9XXX_SET_BRIGHTNESS, 0, 1, 0xFF, ILI9XXX_ENABLE_3_GAMMA, 0, 1, 0x00, ILI9XXX_SET_GAMMA, 0, 1, 0x01, ILI9XXX_SET_PGAMMA, 0, 15, 0x0F, 0x29, 0x24, 0x0C, 0x0E, 0x09, 0x4E, 0x78, 0x3C, 0x09, 0x13, 0x05, 0x17, 0x11, 0x00, ILI9XXX_SET_NGAMMA, 0, 15, 0x00, 0x16, 0x1B, 0x04, 0x11, 0x07, 0x31, 0x33, 0x42, 0x05, 0x0C, 0x0A, 0x28, 0x2F, 0x0F, ILI9XXX_SET_PIX_FMT, 0, 1, 0x05, ILI9XXX_SET_FRAME_CTL_NORMAL, 0, 2, 0x00, 0x1B, ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x0A, 0xA2, ILI9XXX_CMD_PARTIAL_OFF, 0, 0, ILI9XXX_CMD_DISPLAY_ON, 20, 0 }; // clang-format on qp_comms_bulk_command_sequence(device, ili9341_init_sequence, sizeof(ili9341_init_sequence)); // Configure the rotation (i.e. the ordering and direction of memory writes in GRAM) const uint8_t madctl[] = { [QP_ROTATION_0] = ILI9XXX_MADCTL_BGR, [QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MV, [QP_ROTATION_180] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MX | ILI9XXX_MADCTL_MY, [QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV | ILI9XXX_MADCTL_MY, }; qp_comms_command_databyte(device, ILI9XXX_SET_MEM_ACS_CTL, madctl[rotation]); return true; } //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // Driver vtable const struct tft_panel_dc_reset_painter_driver_vtable_t ili9341_driver_vtable = { .base = { .init = qp_ili9341_init, .power = qp_tft_panel_power, .clear = qp_tft_panel_clear, .flush = qp_tft_panel_flush, .pixdata = qp_tft_panel_pixdata, .viewport = qp_tft_panel_viewport, .palette_convert = qp_tft_panel_palette_convert, .append_pixels = qp_tft_panel_append_pixels, }, .rgb888_to_native16bit = qp_rgb888_to_rgb565_swapped, .num_window_bytes = 2, .swap_window_coords = false, .opcodes = { .display_on = ILI9XXX_CMD_DISPLAY_ON, .display_off = ILI9XXX_CMD_DISPLAY_OFF, .set_column_address = ILI9XXX_SET_COL_ADDR, .set_row_address = ILI9XXX_SET_PAGE_ADDR, .enable_writes = ILI9XXX_SET_MEM, }, }; //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// // SPI #ifdef QUANTUM_PAINTER_ILI9341_SPI_ENABLE // Factory function for creating a handle to the ILI9341 device painter_device_t qp_ili9341_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) { for (uint32_t i = 0; i < ILI9341_NUM_DEVICES; ++i) { tft_panel_dc_reset_painter_device_t *driver = &ili9341_drivers[i]; if (!driver->base.driver_vtable) { driver->base.driver_vtable = (const struct painter_driver_vtable_t *)&ili9341_driver_vtable; driver->base.comms_vtable = (const struct painter_comms_vtable_t *)&spi_comms_with_dc_vtable; driver->base.native_bits_per_pixel = 16; // RGB565 driver->base.panel_width = panel_width; driver->base.panel_height = panel_height; driver->base.rotation = QP_ROTATION_0; driver->base.offset_x = 0; driver->base.offset_y = 0; // SPI and other pin configuration driver->base.comms_config = &driver->spi_dc_reset_config; driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin; driver->spi_dc_reset_config.spi_config.divisor = spi_divisor; driver->spi_dc_reset_config.spi_config.lsb_first = false; driver->spi_dc_reset_config.spi_config.mode = spi_mode; driver->spi_dc_reset_config.dc_pin = dc_pin; driver->spi_dc_reset_config.reset_pin = reset_pin; return (painter_device_t)driver; } } return NULL; } #endif // QUANTUM_PAINTER_ILI9341_SPI_ENABLE ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////