/* Copyright 2020 Team Mechlovin'
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#pragma once

#define PRODUCT_ID  0x8710
#define DEVICE_VER  0x0001
#define PRODUCT     Infinity 87 RGB rev1

#define MATRIX_ROW_PINS { A10, A13, A14, C13, A4, A3 }
#define MATRIX_COL_PINS { B12, B13, B14, B15, A8, A9, B11, B10, B2, B1, B0, A7, A6, A5, A2, A1, A0 }


#define DIODE_DIRECTION COL2ROW

//rgb matrix setting
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b0110000 AD <-> GND
// 0b0110011 AD <-> VCC
// 0b0110001 AD <-> SCL
// 0b0110010 AD <-> SDA
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_KEYPRESSES
#define DISABLE_RGB_MATRIX_SPLASH
#define DISABLE_RGB_MATRIX_MULTISPLASH
#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
//#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
//#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#define DRIVER_ADDR_1 0b0110010
#define DRIVER_ADDR_2 0b0110010 // this is here for compliancy reasons.
#define DRIVER_COUNT 1
#define DRIVER_1_LED_TOTAL 91
#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
#define DRIVER_INDICATOR_LED_TOTAL 0