# MCU name
MCU = STM32F103

# GENERIC STM32F103C8T6 board - stm32duino bootloader
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO

DFU_ARGS = -d 1eaf:0003 -a2 -R
DFU_SUFFIX_ARGS = -v 1eaf -p 0003

# Build Options
#   comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes	  # Mouse keys
EXTRAKEY_ENABLE = yes	  # Audio control and System control
CONSOLE_ENABLE = no
COMMAND_ENABLE = no     # Commands for debug and configuration
SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
AUDIO_ENABLE = no
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812

# Want backlighting and RGB Matrix patterns? See the note in the readme,
# apply the patches, and then uncomment the lines below as well as the one in
# config.h.
#
# BACKLIGHT_ENABLE = yes
# BACKLIGHT_DRIVER = rgb_matrix

# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE