/* Copyright 2020 tominabox1
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID 0x7431
#define PRODUCT_ID 0xD645
#define DEVICE_VER 0x0001
#define MANUFACTURER tominabox1
#define PRODUCT Le Chiffre

/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 10

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
#define MATRIX_ROW_PINS { B3, D4, F1, C6 }
#define MATRIX_COL_PINS { F4, F5, B0, B2, B1, B4, D7, C7, D2, F7 }
#define UNUSED_PINS

/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* Define encoder pads */
#define ENCODERS_PAD_A { D5 }
#define ENCODERS_PAD_B { D3 }

/*
 * WS2812 Underglow Matrix options
 */
#define RGB_DI_PIN F0
#define RGBLED_NUM 11

#define DRIVER_LED_TOTAL RGBLED_NUM

#define RGBLIGHT_ANIMATIONS

#ifdef RGB_MATRIX_ENABLE
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#define RGB_MATRIX_HUE_STEP 8
#define RGB_MATRIX_SAT_STEP 8
#define RGB_MATRIX_VAL_STEP 8
#define RGB_MATRIX_SPD_STEP 10
#endif