You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan d09a06a1b3
Update GPIO API usage in keyboard code (#23361)
2 weeks ago
..
keymaps Remove obvious user keymaps, keyboards/{i,j,k}* edition (#23102) 3 months ago
config.h Convert ergodone to use core mcp23018 driver (#17005) 1 year ago
ergodone.c Convert ergodone to use core mcp23018 driver (#17005) 1 year ago
ergodone.h Tidy up LAYOUT macro generation (#18262) 1 year ago
ergodox_compat.h Update GPIO API usage in keyboard code (#23361) 2 weeks ago
keyboard.json Migrate build target markers to keyboard.json - JK (#23588) 3 weeks ago
matrix.c Update GPIO API usage in keyboard code (#23361) 2 weeks ago
readme.md rename kprepublic bm keyboards to have a standardized naming format (#15047) 2 years ago
rules.mk Dedupe I2C, SPI, UART driver inclusions (#22253) 7 months ago

readme.md

ErgoDone

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

  • Keyboard maintainer: Yu He
  • Hardware supported:
    • ErgoDone v1.3 (tested)
  • Hardware availability:

Make example for this keyboard (after setting up your build environment):

make ktec/ergodone:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

  1. To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard. Ergodone Flash Mode

  2. To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):

    hid_bootloader_cli -mmcu=atmega32u4 ktec_ergodone_default.hex