You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Joel Challis 831deac212
Migrate build target markers to keyboard.json (#23293)
1 month ago
..
keymaps Mode M256-WH Community Layout Support (#22019) 8 months ago
config.h WS2812 PWM: prefix for DMA defines (#23111) 2 months ago
halconf.h [Keyboard] Add Mode M256-WS and M256-WH (#20502) 10 months ago
keyboard.json Migrate build target markers to keyboard.json (#23293) 1 month ago
m256wh.c [Keyboard] Add Mode M256-WS and M256-WH (#20502) 10 months ago
matrix_diagram.md Mode M256-WH Community Layout Support (#22019) 8 months ago
mcuconf.h [Keyboard] Add Mode M256-WS and M256-WH (#20502) 10 months ago
readme.md [Keyboard] Add Mode M256-WS and M256-WH (#20502) 10 months ago

readme.md

Mode M256-WH PCB QMK Firmware

m256wh

The M256-WH is the hotswap version PCB support for the Mode Envoy.

  • Keyboard Maintainer: Gondolindrim
  • Hardware Supported: proprietary PCBs using the STM32F401 microcontroller;
  • Hardware Availability: as of april 18, these PCBs are on the verge of being sold with the first kits of the Mode Envoy.

How to flash

In order to flash this PCB, first build the default layout (after setting up your build environment):

make mode/m256wh:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB for at least five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (escape key, layer 1 of the default keymap)