Adam Perlman
0ab8edb523
[Keymap] Ergodox EZ and dactyl-manuform keymaps for rishka (#7051)
* Setup keymaps and userspace for Rishka * Creates a keymap for Ergodox Ez, bdn9 and Dactyl Manuform 5x6 * Update bdn9 config with suggested change * Add pragma to other header files * Apply suggestions from code review Co-Authored-By: fauxpark <fauxpark@gmail.com> * Updates from review from fauxpark * Updates from review Swap to keyboard_post_init, layer_state_t and use layer state for encoder * Updates from review Swap to keyboard_post_init, layer_state_t and use layer state for encoder * Add missing change from review |
4 years ago | |
---|---|---|
.. | ||
keymaps | [Keymap] Ergodox EZ and dactyl-manuform keymaps for rishka (#7051) | 4 years ago |
util | Remove empty fn_actions[] | 5 years ago |
190hotfix.sh | Creates a layouts/ folder for keymaps shared between keyboards (#1609) | 6 years ago |
config.h | Keyboard/ergodox debounce (#6994) | 4 years ago |
ergodox_ez.c | [Keyboard] Updates to ZSA boards (#6513) | 4 years ago |
ergodox_ez.h | [Keyboard] Updates to ZSA boards (#6513) | 4 years ago |
info.json | Removes Erez personally from QMK (#5883) | 5 years ago |
matrix.c | Port DEBUG_MATRIX_SCAN_RATE to core (#7029) | 4 years ago |
readme.md | Syntax update (#2660) | 6 years ago |
rules.mk | Cleanup rules.mk for 32U4 keyboards, A-F (#6804) | 4 years ago |
The Ez uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli
.
To flash the firmware:
Build the firmware with make <keyboardname>:<keymapname>
, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex
, e.g.
ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.
See also video demonstration using Teensy in auto mode.
To flash with ´teensy-loader-cli´:
Build the firmware with make keymapname
, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.