You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Joel Challis f8123c27ad
Remove obvious user keymaps, keyboards/{v,x,y,z}* edition. (#23083)
1 month ago
..
keymaps Remove obvious user keymaps, keyboards/{v,x,y,z}* edition. (#23083) 1 month ago
rev1 Move RGBLight animations to data driven (#21635) 7 months ago
rev2 Move RGBLight animations to data driven (#21635) 7 months ago
info.json Move ortho & numpad layouts to data driven (#20183) 1 year ago
readme.md [Keyboard] Added Vitamins Included Rev2 (#6593) 4 years ago
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 1 year ago
vitamins_included.c Move ortho & numpad layouts to data driven (#20183) 1 year ago

readme.md

Let's Split Vitamins Included

Let's Split Vitamins included, assmebled in 3D printed case

This readme and most of the code are from the lets split readme

REV1
REV2

Hardware

Hardware files for the Let's Split vitamins included are stored here

Features

Some features supported by the firmware:

  • Either half can connect to the computer via USB, or both halves can be used independently.
  • Optional support for I2C connection between the two halves if for some reason you require a faster connection between the two halves. Note that this requires 4 conductors between halves, and as such requires a TRRS cable.

Required Hardware

Amount Description
1 PCB kit from novelkeys
48 MX compatible switches
48 1U keycaps
1 Mini-usb-B cable or USB-C cable for rev2. Keep in mind rev2.0 doesn't work with USB-C <> USB-C cables
1 TRS / TRRS cable

Optional Hardware

A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware.

WS2812 LEDs can be added to the board. Check the different revision readme for specifics.

Using I2C

On the left half PCB, there's two pads labled I2C Pullup if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.

You can change your configuration between serial and i2c by modifying your config.h file.