You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan b0eda7701a
Move keyboard USB IDs and strings to data driven, pass 3 (#18111)
1 year ago
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2 years ago
rev1 Move keyboard USB IDs and strings to data driven, pass 3 (#18111) 1 year ago
rev2 Move keyboard USB IDs and strings to data driven, pass 3 (#18111) 1 year ago
rev3 Move keyboard USB IDs and strings to data driven, pass 3 (#18111) 1 year ago
.noci Fix CI. (#15828) 2 years ago
config.h Move keyboard USB IDs and strings to data driven: Y (#17926) 1 year ago
info.json Move keyboard USB IDs and strings to data driven: Y (#17926) 1 year ago
readme.md [Keyboard] move ymd75 to ymdk vendor folder (#15645) 2 years ago
rules.mk Fix CI. (#15828) 2 years ago
ymd75.c [Keyboard] move ymd75 to ymdk vendor folder (#15645) 2 years ago
ymd75.h [Keyboard] move ymd75 to ymdk vendor folder (#15645) 2 years ago

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.

Make example for this keyboard (after setting up your build environment):

make ymdk/ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymdk/ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.