Joel Challis
d91987ab9a
* I2C_TIMEOUT is not defined on arm teensy * Work round teensy having different ChibiOS config options * Stash OLED conf files * update comment * update comment * Remove stm32 alias to allow teensy alt mode |
3 years ago | |
---|---|---|
.. | ||
chconf.h | 2020 February 29 Breaking Changes Update (#8064) | 4 years ago |
config.h | Enable OLED support for Teensy 3.2/LC (#7591) | 3 years ago |
halconf.h | Enable OLED support for Teensy 3.2/LC (#7591) | 3 years ago |
mcuconf.h | Enable OLED support for Teensy 3.2/LC (#7591) | 3 years ago |
readme.md | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 5 years ago |
rules.mk | Add Arm Teensys to mcu_selection.mk (#8026) | 4 years ago |
To trigger keypress, short together pins D5 and B2 (marked on the PCB as 20 and 19).
When setting matrix pins, you need to use the MCU definitions instead of what is printed on the PCB. Sourced from https://www.pjrc.com/teensy/schematic32.gif. The following table can be used to convert between the two.
PCB | MCU | Notes |
---|---|---|
0 | B16 | |
1 | B17 | |
2 | D0 | |
3 | A12 | |
4 | A13 | |
5 | D7 | |
6 | D4 | |
7 | D2 | |
8 | D3 | |
9 | C3 | |
10 | C4 | |
11 | C6 | |
12 | C7 | |
13/LED | C5 | |
14/A0 | D1 | |
15/A1 | C0 | |
16/A2 | B0 | |
17/A3 | B1 | |
18/A4 | B3 | |
19/A5 | B2 | |
20/A6 | D5 | |
21/A7 | D6 | |
22/A8 | C1 | |
23/A9 | C2 | |
24/A10 | ADC0_DP0 in schematic [1] | |
25/A11 | ADC0_DM0 in schematic [1] | |
26/A12 | ADC0_DP3 in schematic [1] |
[1] - Currently not configured and may require extra work to implement.