You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 764dc18a81
Remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` from keyboard config.h (#16655)
2 years ago
..
keymaps move @yangdigi 's keyboards to a YDKB folder (#15681) 2 years ago
config.h Remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` from keyboard config.h (#16655) 2 years ago
info.json move @yangdigi 's keyboards to a YDKB folder (#15681) 2 years ago
just60.h move @yangdigi 's keyboards to a YDKB folder (#15681) 2 years ago
readme.md move @yangdigi 's keyboards to a YDKB folder (#15681) 2 years ago
rules.mk move @yangdigi 's keyboards to a YDKB folder (#15681) 2 years ago

readme.md

Just60

Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.

To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, RESET, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.

Backlight LEDs and Bluetooth are not working yet.

Make example for this keyboard (after setting up your build environment):

make ydkb/just60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.