mh
/
qmk_firmware
mirror of https://github.com/qmk/qmk_firmware/


								#pragma once


								// Use custom magic number so that when switching branches, EEPROM always gets reset

								#define EECONFIG_MAGIC_NUMBER (uint16_t)0x1339


								/* Set Polling rate to 1000Hz */

								#define USB_POLLING_INTERVAL_MS 1


								#ifdef AUDIO_ENABLE


								#    define AUDIO_CLICKY

								#    define STARTUP_SONG SONG(RICK_ROLL)

								#    define GOODBYE_SONG SONG(SONIC_RING)

								#    define DEFAULT_LAYER_SONGS \

								        { SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND), SONG(DVORAK_SOUND), SONG(OVERWATCH_THEME) }


								#    define AUDIO_CLICKY_FREQ_RANDOMNESS 1.5f


								#    define UNICODE_SONG_MAC SONG(RICK_ROLL)

								#    define UNICODE_SONG_LNX SONG(RICK_ROLL)

								#    define UNICODE_SONG_WIN SONG(RICK_ROLL)

								#    define UNICODE_SONG_BSD SONG(RICK_ROLL)

								#    define UNICODE_SONG_WINC SONG(RICK_ROLL)

								#endif  // !AUDIO_ENABLE


								#ifdef RGB_MATRIX_ENABLE

								#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses (will slow down matrix scan by a lot)

								// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)

								#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS

								// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects

								#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended

								// #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255

								// #   define EECONFIG_RGB_MATRIX (uint32_t *)16


								#    if defined(__AVR__) && !defined(__AVR_AT90USB1286__)

								#        define DISABLE_RGB_MATRIX_ALPHAS_MODS

								#        define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN

								#        define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT

								#        define DISABLE_RGB_MATRIX_BREATHING

								#        define DISABLE_RGB_MATRIX_BAND_SAT

								#        define DISABLE_RGB_MATRIX_BAND_VAL

								#        define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT

								#        define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL

								#        define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT

								#        define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL

								#        define DISABLE_RGB_MATRIX_CYCLE_ALL

								#        define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT

								#        define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN

								#        define DISABLE_RGB_MATRIX_CYCLE_OUT_IN

								// #       define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL

								#        define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON

								#        define DISABLE_RGB_MATRIX_DUAL_BEACON

								#        define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL

								#        define DISABLE_RGB_MATRIX_CYCLE_SPIRAL

								#        define DISABLE_RGB_MATRIX_RAINBOW_BEACON

								#        define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS

								#        define DISABLE_RGB_MATRIX_RAINDROPS

								#        define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS

								// #       define DISABLE_RGB_MATRIX_TYPING_HEATMAP

								#        define DISABLE_RGB_MATRIX_DIGITAL_RAIN

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS

								#        define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS

								#        define DISABLE_RGB_MATRIX_SPLASH

								#        define DISABLE_RGB_MATRIX_MULTISPLASH

								#        define DISABLE_RGB_MATRIX_SOLID_SPLASH

								#        define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH

								#    endif  // AVR

								#endif      // RGB_MATRIX_ENABLE


								#ifdef QMK_KEYS_PER_SCAN

								#    undef QMK_KEYS_PER_SCAN

								#    define QMK_KEYS_PER_SCAN 1

								#endif  // !QMK_KEYS_PER_SCAN


								// this makes it possible to do rolling combos (zx) with keys that

								// convert to other keys on hold (z becomes ctrl when you hold it,

								// and when this option isn't enabled, z rapidly followed by x

								// actually sends Ctrl-x. That's bad.)

								#define IGNORE_MOD_TAP_INTERRUPT

								#undef PERMISSIVE_HOLD

								//#define TAPPING_FORCE_HOLD

								//#define RETRO_TAPPING


								#define FORCE_NKRO


								#ifndef TAPPING_TOGGLE

								#    define TAPPING_TOGGLE 1

								#endif


								#ifdef TAPPING_TERM

								#    undef TAPPING_TERM

								#endif  // TAPPING_TERM

								#if defined(KEYBOARD_ergodox_ez)

								#    define TAPPING_TERM 185

								#else

								#    define TAPPING_TERM 175

								#endif


								#define TAP_CODE_DELAY 5


								/* Disable unused and unneeded features to reduce on firmware size */

								#ifdef LOCKING_SUPPORT_ENABLE

								#    undef LOCKING_SUPPORT_ENABLE

								#endif

								#ifdef LOCKING_RESYNC_ENABLE

								#    undef LOCKING_RESYNC_ENABLE

								#endif