You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Joel Challis 2757251218
Specify blackpill board files where relevant (#17521)
1 year ago
..
blackpill_f401 Specify blackpill board files where relevant (#17521) 1 year ago
keymaps/default [Keyboard] Add Meck TKL handwired (#15533) 2 years ago
config.h Remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` from keyboard config.h (#16655) 2 years ago
info.json [Keyboard] Add Meck TKL handwired (#15533) 2 years ago
meck_tkl.c [Keyboard] Add Meck TKL handwired (#15533) 2 years ago
meck_tkl.h [Keyboard] Add Meck TKL handwired (#15533) 2 years ago
readme.md [Keyboard] Add Meck TKL handwired (#15533) 2 years ago
rules.mk [Keyboard] Add Meck TKL handwired (#15533) 2 years ago

readme.md

meck_tkl

meck_tkl

A standard tenkeyless keyboard, using STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make handwired/meck_tkl:default

Flashing example for this keyboard:

make handwired/meck_tkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available

Wiring instructions

  • On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
    • USB-related pins: PA10, PA11, PA12
    • BOOT1 pin: PB2

Sample wiring:

wiring