Joel Challis
2a56b61a28
[Keyboard] Refactor of onekey to support multiple development boards (#6017)
* Initial refactor of onekey to support multiple development boards * Fixes to get teensy lc && 3.2 working * Add pin tables * Add caveats to Teensy boards * Correct bootloader for Elite-C |
4 years ago | |
---|---|---|
.. | ||
ld | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
chconf.h | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
config.h | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
halconf.h | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
mcuconf.h | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
readme.md | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
rules.mk | [Keyboard] Refactor of onekey to support multiple development boards (#6017) | 4 years ago |
To trigger keypress, short together pins D5 and B2 (marked on the PCB as 20 and 19).
When setting matrix pins, you need to use the MCU definitions instead of what is printed on the PCB. Sourced from https://www.pjrc.com/teensy/schematic32.gif. The following table can be used to convert between the two.
PCB | MCU | Notes |
---|---|---|
0 | B16 | |
1 | B17 | |
2 | D0 | |
3 | A12 | |
4 | A13 | |
5 | D7 | |
6 | D4 | |
7 | D2 | |
8 | D3 | |
9 | C3 | |
10 | C4 | |
11 | C6 | |
12 | C7 | |
13/LED | C5 | |
14/A0 | D1 | |
15/A1 | C0 | |
16/A2 | B0 | |
17/A3 | B1 | |
18/A4 | B3 | |
19/A5 | B2 | |
20/A6 | D5 | |
21/A7 | D6 | |
22/A8 | C1 | |
23/A9 | C2 | |
24/A10 | ADC0_DP0 in schematic [1] | |
25/A11 | ADC0_DM0 in schematic [1] | |
26/A12 | ADC0_DP3 in schematic [1] |
[1] - Currently not configured and may require extra work to implement.