You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
186 lines
5.2 KiB
186 lines
5.2 KiB
/* Copyright 2021 Colin Lam (Ploopy Corporation)
|
|
* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
|
|
* Copyright 2019 Sunjun Kim
|
|
* Copyright 2019 Hiroyuki Okada
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "adns5050.h"
|
|
#include "wait.h"
|
|
#include "debug.h"
|
|
#include "print.h"
|
|
#include "gpio.h"
|
|
|
|
#ifndef OPTIC_ROTATED
|
|
# define OPTIC_ROTATED false
|
|
#endif
|
|
|
|
// Definitions for the ADNS serial line.
|
|
#ifndef ADNS_SCLK_PIN
|
|
# define ADNS_SCLK_PIN B7
|
|
#endif
|
|
|
|
#ifndef ADNS_SDIO_PIN
|
|
# define ADNS_SDIO_PIN C6
|
|
#endif
|
|
|
|
#ifndef ADNS_CS_PIN
|
|
# define ADNS_CS_PIN B4
|
|
#endif
|
|
|
|
#ifdef CONSOLE_ENABLE
|
|
void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
|
|
#endif
|
|
|
|
// Initialize the ADNS serial pins.
|
|
void adns_init(void) {
|
|
setPinOutput(ADNS_SCLK_PIN);
|
|
setPinOutput(ADNS_SDIO_PIN);
|
|
setPinOutput(ADNS_CS_PIN);
|
|
}
|
|
|
|
// Perform a synchronization with the ADNS.
|
|
// Just as with the serial protocol, this is used by the slave to send a
|
|
// synchronization signal to the master.
|
|
void adns_sync(void) {
|
|
writePinLow(ADNS_CS_PIN);
|
|
wait_us(1);
|
|
writePinHigh(ADNS_CS_PIN);
|
|
}
|
|
|
|
void adns_cs_select(void) { writePinLow(ADNS_CS_PIN); }
|
|
|
|
void adns_cs_deselect(void) { writePinHigh(ADNS_CS_PIN); }
|
|
|
|
uint8_t adns_serial_read(void) {
|
|
setPinInput(ADNS_SDIO_PIN);
|
|
uint8_t byte = 0;
|
|
|
|
for (uint8_t i = 0; i < 8; ++i) {
|
|
writePinLow(ADNS_SCLK_PIN);
|
|
wait_us(1);
|
|
|
|
byte = (byte << 1) | readPin(ADNS_SDIO_PIN);
|
|
|
|
writePinHigh(ADNS_SCLK_PIN);
|
|
wait_us(1);
|
|
}
|
|
|
|
return byte;
|
|
}
|
|
|
|
void adns_serial_write(uint8_t data) {
|
|
setPinOutput(ADNS_SDIO_PIN);
|
|
|
|
for (int8_t b = 7; b >= 0; b--) {
|
|
writePinLow(ADNS_SCLK_PIN);
|
|
|
|
if (data & (1 << b))
|
|
writePinHigh(ADNS_SDIO_PIN);
|
|
else
|
|
writePinLow(ADNS_SDIO_PIN);
|
|
|
|
wait_us(2);
|
|
|
|
writePinHigh(ADNS_SCLK_PIN);
|
|
}
|
|
|
|
// tSWR. See page 15 of the ADNS spec sheet.
|
|
// Technically, this is only necessary if the next operation is an SDIO
|
|
// read. This is not guaranteed to be the case, but we're being lazy.
|
|
wait_us(4);
|
|
|
|
// Note that tSWW is never necessary. All write operations require at
|
|
// least 32us, which exceeds tSWW, so there's never a need to wait for it.
|
|
}
|
|
|
|
// Read a byte of data from a register on the ADNS.
|
|
// Don't forget to use the register map (as defined in the header file).
|
|
uint8_t adns_read_reg(uint8_t reg_addr) {
|
|
adns_cs_select();
|
|
|
|
adns_serial_write(reg_addr);
|
|
|
|
// We don't need a minimum tSRAD here. That's because a 4ms wait time is
|
|
// already included in adns_serial_write(), so we're good.
|
|
// See page 10 and 15 of the ADNS spec sheet.
|
|
// wait_us(4);
|
|
|
|
uint8_t byte = adns_serial_read();
|
|
|
|
// tSRW & tSRR. See page 15 of the ADNS spec sheet.
|
|
// Technically, this is only necessary if the next operation is an SDIO
|
|
// read or write. This is not guaranteed to be the case.
|
|
// Honestly, this wait could probably be removed.
|
|
wait_us(1);
|
|
|
|
adns_cs_deselect();
|
|
|
|
return byte;
|
|
}
|
|
|
|
void adns_write_reg(uint8_t reg_addr, uint8_t data) {
|
|
adns_cs_select();
|
|
adns_serial_write(0b10000000 | reg_addr);
|
|
adns_serial_write(data);
|
|
adns_cs_deselect();
|
|
}
|
|
|
|
report_adns_t adns_read_burst(void) {
|
|
adns_cs_select();
|
|
|
|
report_adns_t data;
|
|
data.dx = 0;
|
|
data.dy = 0;
|
|
|
|
adns_serial_write(REG_MOTION_BURST);
|
|
|
|
// We don't need a minimum tSRAD here. That's because a 4ms wait time is
|
|
// already included in adns_serial_write(), so we're good.
|
|
// See page 10 and 15 of the ADNS spec sheet.
|
|
// wait_us(4);
|
|
|
|
uint8_t x = adns_serial_read();
|
|
uint8_t y = adns_serial_read();
|
|
|
|
// Burst mode returns a bunch of other shit that we don't really need.
|
|
// Setting CS to high ends burst mode early.
|
|
adns_cs_deselect();
|
|
|
|
data.dx = convert_twoscomp(x);
|
|
data.dy = convert_twoscomp(y);
|
|
|
|
return data;
|
|
}
|
|
|
|
// Convert a two's complement byte from an unsigned data type into a signed
|
|
// data type.
|
|
int8_t convert_twoscomp(uint8_t data) {
|
|
if ((data & 0x80) == 0x80)
|
|
return -128 + (data & 0x7F);
|
|
else
|
|
return data;
|
|
}
|
|
|
|
// Don't forget to use the definitions for CPI in the header file.
|
|
void adns_set_cpi(uint8_t cpi) { adns_write_reg(REG_MOUSE_CONTROL2, cpi); }
|
|
|
|
bool adns_check_signature(void) {
|
|
uint8_t pid = adns_read_reg(REG_PRODUCT_ID);
|
|
uint8_t rid = adns_read_reg(REG_REVISION_ID);
|
|
uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2);
|
|
|
|
return (pid == 0x12 && rid == 0x01 && pid2 == 0x26);
|
|
}
|