Keyboard Maintainer: QMK Community
Hardware Supported: Skog PCB
Hardware Availability: https://geekhack.org/index.php?topic=87953.0
Make example for this keyboard (after setting up your build environment):
make percent/skog:default
Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
Reset Key: Hold down the key located at K00
, commonly programmed as Pause while plugging in the keyboard.
Windows:
Find Device
button and ensure that your keyboard is found.Open .hex File
button and locate the .hex
file you created.Flash Device
button and wait for the process to complete.macOS:
Install homebrew by typing the following:
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Install crosspack-avr
.
brew cask install crosspack-avr
Install the following packages:
brew install python3
pip3 install pyusb
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
Place your keyboard into reset.
Flash the board by typing bootloadHID -r
followed by the path to your .hex
file.
Please Note: You will need to use the EEP_RST
keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.