You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)
2 years ago
..
keymaps change to cmm.studio saka68 folder. split to solder and hotswap, add hotswap fimware (#11443) 3 years ago
config.h [Keyboard] add sam's sg81m keyboard (#11624) 3 years ago
hotswap.c change to cmm.studio saka68 folder. split to solder and hotswap, add hotswap fimware (#11443) 3 years ago
hotswap.h change to cmm.studio saka68 folder. split to solder and hotswap, add hotswap fimware (#11443) 3 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
readme.md change to cmm.studio saka68 folder. split to solder and hotswap, add hotswap fimware (#11443) 3 years ago
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2 years ago

readme.md

CMM.Studio Saka68

CMM.Studio Saka68 Keyboard

CMM.Studio Saka68

  • Keyboard Maintainer: CMM.Studio Freather
  • Hardware Supported: PCB, Atmega32u4 this firmware supports iso and ansi hotswap directly, once you flash the via firmware, you only need to select the layout and change to iso layout, then you can use iso hotswap version

Make example for this keyboard (after setting up your build environment):

make cmm_studio/saka68/hotswap:default

For reset instruction, use the physical reset button on the back of the keyboard to enter bootloader mode

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.