You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Nathan13888 4eebefada7
[Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172)
3 years ago
..
keymaps [Keyboard] add support for ymd75 rev3 (#10483) 3 years ago
rev1 [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 3 years ago
rev2 [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 3 years ago
rev3 [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 3 years ago
.noci Initial list of keyboards to exclude from CI (#11213) 3 years ago
config.h [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 3 years ago
info.json [Keyboard] add support for ymd75 rev3 (#10483) 3 years ago
readme.md Rename keyboard-level readmes to lower-case (#10759) 3 years ago
rules.mk YMD75: move MCU/Bootloader rules to revision level (#9452) 3 years ago
ymd75.c Add support for YMD75 rev 2 (#8853) 4 years ago
ymd75.h [Keyboard] add support for ymd75 rev3 (#10483) 3 years ago

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.