9R 69094b7dfb disable LTO_ENABLE with arm mcu | 1 year ago | |
---|---|---|
.. | ||
common | add last_wasd to stop register_keycode spam | 2 months ago |
keymaps | Major cleanup | 2 months ago |
promicro | disable LTO_ENABLE with arm mcu | 2 months ago |
stm32f103 | move analog pin definition to MCU specific config.h | 2 months ago |
config.h | Major cleanup | 2 months ago |
info.json | Major cleanup | 2 months ago |
readme.md | Add handwired/replicazeron | 2 months ago |
replicazeron.c | move analog pin definition to MCU specific config.h | 2 months ago |
replicazeron.h | Major cleanup | 2 months ago |
rules.mk | disable LTO_ENABLE with arm mcu | 2 months ago |
This is a config to run a 3dprinted keyboard controller with qmk based on this project:
https://sites.google.com/view/alvaro-rosati/azeron-keypad-diy-tutorial
Some additional and redesigned files (i.e. for the OLED-display) can be found here:
https://github.com/9R/replicazeron
Currently configs for STM32F103 and atmega32U4 are available, but STM32 is recommended, since the atmega may run out of flash with all features enabled.
With minor adjustments to Pinconfig it should be possible to use other MCUs that are supported by QMK
Full schematics can be found in this repo:
https://github.com/9R/replicazeron_schematics
| 0 | B1 | 15 | B15 | red | | 1 | B3 | 14 | A8 | blue | | 2 | B2 | 16 | A9 | yellow | | 3 | B6 | 10 | A10 | brown | | 4 | B5 | 9 | A15 | orange | | 5 | B4 | 8 | B3 | green |
| 0 | C6 | 5 | A7 | white | | 1 | D4 | 4 | A6 | grey | | 2 | D7 | 6 | A5 | violet | | 3 | E6 | 7 | A4 | grey | | 4 | F7 | A0 | B4 | white |
| GND | GND | GND | white | | VCC | VCC | VCC | red | | F4 | B1 | VRx | brown | | F5 | B0 | VRy | yellow| | | | SW | blue |
| GND | GND | GND | white | | VCC | VCC | VCC | red | | D4 | B10 | SDA | green | | C6 | B11 | SCL | yellow|