You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Manna Harbour 6b299fab6e
[Keymap] Update Miryoku (#14827)
2 years ago
..
astar Remove bootloader listings from rules.mk (#14330) 2 years ago
astar_mirrored Remove bootloader listings from rules.mk (#14330) 2 years ago
feather Remove bootloader listings from rules.mk (#14330) 2 years ago
keymaps [Keymap] Update Miryoku (#14827) 2 years ago
promicro [Keyboad] Add VIA support for Atreus promicro (#13169) 2 years ago
teensy2 Remove bootloader listings from rules.mk (#14330) 2 years ago
atreus.c Update Atreus to current code conventions (#5849) 4 years ago
atreus.h Add config for Atreus based on Adafruit Feather BLE (#9140) 3 years ago
config.h Remove `DESCRIPTION`, 0-A (#11369) 3 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
readme.md [Keyboard] Added Atreus Pro Micro variant (#8059) 4 years ago
rules.mk Remove audio pin references in rules.mk (#14532) 2 years ago

readme.md

Atreus

Atreus

A small mechanical keyboard that is based around the shape of the human hand.

Keyboard Maintainer: Phil Hagelberg
Hardware Supported: Atreus, PCB-based or hand-wired
Hardware Availability: https://atreus.technomancy.us

These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different make commands depending on the variant you have; see examples below.

Make example for this keyboard (after setting up your build environment):

make atreus:default:avrdude

If you would like to use one of the alternative controllers:

make atreus/astar:default:flash
make atreus/teensy2:default:flash
make atreus/promicro:default:flash

If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing down instead of up. Specify that by adding PCBDOWN=yes to your make commands, e.g.

make PCBDOWN=yes atreus:default:avrdude

Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.