You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)
2 years ago
..
keymaps/default XT converter cleanup (#12264) 3 years ago
config.h XT converter cleanup (#12264) 3 years ago
info.json Remove width, height and key_count from info.json (#14274) 2 years ago
matrix.c XT converter cleanup (#12264) 3 years ago
readme.md Rename keyboard-level readmes to lower-case (#10759) 3 years ago
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2 years ago
xt_usb.c Keyboard: Port of TMK XT USB Converter (#3619) 5 years ago
xt_usb.h XT converter cleanup (#12264) 3 years ago

readme.md

XT to USB keyboard converter

This is a port of TMK's converter/xt_usb to QMK.

This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)

Connect Wires

  1. Connect Vcc and GND.
  2. Connect Clock and Data line. Clock is on PD1, Data on PD0 by default. And optionally you can use PB7 for Reset.(Compatible to Soarer's converter) To change pin configuration edit config.h.
  3. You need pull-up resistor. 1K-10K Ohm will be OK.

XT keyboard protocol resource

https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol